RN60C2000FR36 Equivalent & Substitute Parts

Part Overview

The RN60C2000FR36 is a 200 Ohm ±1% metal film axial through-hole resistor rated at 0.25W (1/4W) manufactured by Vishay Dale. This component is part of the military-grade RN60 series, featuring flame retardant coating, moisture resistance, and safety certification per MIL-R-10509/1. The part is currently active in production with 839 units in stock. Substitute parts are identified to address packaging format requirements, tolerance upgrades, and inventory availability while maintaining electrical and mechanical compatibility.

Substiute Parts

RN60C2000FR36

Vishay DaleIn Stock: 881RN60C2000FR36 Datasheet

Current PartRFQ

RN60C2000FB14

Vishay DaleIn Stock: 1726RN60C2000FB14 Datasheet

DirectRFQ

RN60E2000BB14

Vishay DaleIn Stock: 1658RN60E2000BB14 Datasheet

UpgradeRFQ

RN60C2000FRE6

Vishay DaleIn Stock: 6550RN60C2000FRE6 Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the RN60C2000FR36 are classified based on the following substitution criteria:

Direct Packaging Equivalent (RN60C2000FB14): Identical electrical specifications (200 Ohms, ±1% tolerance, 0.25W, ±50ppm/°C) and mechanical form factor. Differs only in packaging format (Bulk vs. Tape & Reel). Suitable for applications where packaging format does not impact assembly or logistics requirements.

Tolerance Upgrade (RN60E2000BB14): Enhanced tolerance specification (±0.1% vs. ±1%) with improved temperature coefficient (±25ppm/°C vs. ±50ppm/°C). Maintains identical resistance value, power rating, and operating temperature range. Provides superior stability for precision circuit applications. Packaged in Bulk format.

Parametric Equivalent (RN60C2000FRE6): Identical electrical and mechanical specifications to the main part (200 Ohms, ±1% tolerance, 0.25W, ±50ppm/°C). Differs only in packaging format (Cut Tape vs. Tape & Reel). Suitable for component-level sourcing or alternative supply chain requirements.

All substitute parts maintain the same base product number (RN60), military series classification, and compliance status (RoHS non-compliant, REACH Affected, ECCN EAR99).

Parameter Comparison

Engineering Selection Recommendations

Selection of substitute parts is determined by application requirements and supply chain constraints:

RN60C2000FB14 is selected when bulk packaging format is acceptable and tape & reel packaging is not required. Electrical performance is identical to the main part. This option provides increased inventory availability (1671 units vs. 839 units).

RN60E2000BB14 is selected for applications requiring enhanced tolerance and temperature stability. The ±0.1% tolerance and ±25ppm/°C temperature coefficient provide superior performance in precision analog circuits, measurement instrumentation, and temperature-sensitive applications. This part maintains all military certifications and compliance status of the main part.

RN60C2000FRE6 is selected when cut tape packaging format is required or when maximum inventory availability is prioritized. Electrical specifications are identical to the main part. This option provides the highest inventory level (6452 units) and alternative packaging format for component-level sourcing.

All substitute parts maintain active product status, military series classification (MIL-R-10509/1), and identical compliance certifications (RoHS non-compliant, REACH Affected, ECCN EAR99).

Frequently Asked Questions (FAQ)

Q: Can RN60C2000FB14 be used as a direct replacement for RN60C2000FR36?

A: Yes. Both parts have identical electrical specifications (200 Ohms, ±1%, 0.25W, ±50ppm/°C) and mechanical dimensions (0.145" Dia × 0.344" L). The only difference is packaging format (Bulk vs. Tape & Reel). Substitution is valid for applications where packaging format does not impact assembly or logistics.

Q: What is the advantage of RN60E2000BB14 over the main part?

A: RN60E2000BB14 provides tighter tolerance (±0.1% vs. ±1%) and lower temperature coefficient (±25ppm/°C vs. ±50ppm/°C). These specifications result in improved stability and accuracy in precision applications. Resistance value, power rating, and operating temperature range remain identical.

Q: Are all substitute parts compatible with the same PCB footprint?

A: Yes. All parts maintain identical axial package dimensions (0.145" Dia × 0.344" L, 3.68mm × 8.74mm) and two-termination configuration. PCB footprint compatibility is maintained across all substitute parts.

Q: What is the difference between Tape & Reel, Bulk, and Cut Tape packaging?

A: Tape & Reel (TR) packaging is used for automated assembly processes. Bulk packaging is loose component format suitable for manual assembly or kit applications. Cut Tape (CT) packaging is individual component strips cut from reel format, used for component-level sourcing or small-quantity requirements.

Q: Do all substitute parts meet the same military specifications?

A: Yes. All parts are classified as Military series, comply with MIL-R-10509/1 standard, and maintain identical compliance status (RoHS non-compliant, REACH Affected, ECCN EAR99).

Q: Which substitute part should be selected for maximum inventory availability?

A: RN60C2000FRE6 provides the highest inventory level (6452 units) and is suitable when cut tape packaging format is acceptable for the application.