RN60C2000FBSL Equivalent & Substitute Parts

Part Overview

The RN60C2000FBSL is a 200 Ohm ±1% metal film through-hole resistor rated at 0.25W (1/4W) in axial package configuration. This component is part of the Vishay Dale RN60 military-grade resistor series, featuring flame retardant coating, moisture resistance, and safety-rated construction per MIL-R-10509/1. The part maintains active product status with 952 units currently in stock. Substitute parts are identified to address packaging format availability, tolerance requirements, or inventory constraints while maintaining electrical and mechanical compatibility.

Substiute Parts

RN60C2000FBSL

Vishay DaleIn Stock: 973RN60C2000FBSL Datasheet

Current PartRFQ

RN60C2000FRE6

Vishay DaleIn Stock: 6550RN60C2000FRE6 Datasheet

DirectRFQ

RN60E2000BB14

Vishay DaleIn Stock: 1658RN60E2000BB14 Datasheet

UpgradeRFQ

RN60C2000FB14

Vishay DaleIn Stock: 1726RN60C2000FB14 Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the RN60C2000FBSL are classified based on the following substitution criteria:

Direct Substitutes maintain identical electrical parameters (200 Ohms, ±1% tolerance, 0.25W power rating, ±50ppm/°C temperature coefficient) and mechanical specifications (axial package, identical dimensions). Substitution is permitted when packaging format differs (Bulk versus Cut Tape).

Upgrade Substitutes provide enhanced electrical performance through tighter tolerance specifications (±0.1% versus ±1%) and improved temperature coefficient (±25ppm/°C versus ±50ppm/°C) while maintaining all other parameters. These parts are electrically and mechanically compatible with the original specification.

Parametric Equivalents match all critical electrical and mechanical parameters with the main part, differing only in packaging or inventory designation.

All substitute parts share the following mandatory compatibility criteria:

• Resistance value: 200 Ohms
• Power rating: 0.25W (1/4W)
• Package type: Axial
• Physical dimensions: 0.145" Dia × 0.344" L
• Operating temperature range: -65°C to 175°C
• Series classification: Military, MIL-R-10509/1, RN60
• Composition: Metal Film
• Features: Flame Retardant Coating, Military, Moisture Resistant, Safety

Parameter Comparison

Engineering Selection Recommendations

All substitute parts maintain active product status and are manufactured by Vishay Dale under the same military-grade RN60 series specification MIL-R-10509/1. All parts share identical RoHS non-compliance status, REACH affected classification, ECCN EAR99, and HTSUS 8533.21.0090 coding.

RN60C2000FRE6 is selected when Cut Tape packaging format is required for automated assembly processes. Electrical and mechanical specifications are identical to the main part.

RN60E2000BB14 is selected when enhanced tolerance performance (±0.1%) and improved temperature stability (±25ppm/°C) are required within the application circuit. This upgrade maintains full mechanical compatibility and operating temperature range.

RN60C2000FB14 is selected as a parametric equivalent when bulk packaging is required and inventory of the primary part is constrained. All electrical and mechanical parameters match the main part specification.

Frequently Asked Questions (FAQ)

Q: Can RN60C2000FRE6 be used as a direct replacement for RN60C2000FBSL?

A: Yes. RN60C2000FRE6 is electrically and mechanically identical to RN60C2000FBSL. The only difference is packaging format (Cut Tape versus Bulk). Both parts are suitable for identical circuit applications.

Q: What is the advantage of using RN60E2000BB14?

A: RN60E2000BB14 provides tighter tolerance (±0.1% versus ±1%) and lower temperature coefficient (±25ppm/°C versus ±50ppm/°C). These specifications improve circuit accuracy and stability across the operating temperature range. Mechanical compatibility and package type remain unchanged.

Q: Are all substitute parts suitable for military applications?

A: Yes. All substitute parts are classified within the Military, MIL-R-10509/1 RN60 series and maintain identical military-grade construction features including flame retardant coating, moisture resistance, and safety rating.

Q: What packaging format should be selected for manual assembly?

A: Bulk packaging (RN60C2000FBSL, RN60E2000BB14, RN60C2000FB14) is suitable for manual assembly. Cut Tape packaging (RN60C2000FRE6) is optimized for automated pick-and-place assembly equipment.

Q: Do all substitute parts have the same physical dimensions?

A: Yes. All substitute parts maintain identical axial package dimensions of 0.145" Dia × 0.344" L (3.68mm × 8.74mm), ensuring mechanical compatibility with existing PCB layouts and component mounting.

Q: What is the operating temperature range for all substitute parts?

A: All parts operate across the identical temperature range of -65°C to 175°C, maintaining specified electrical performance throughout this range.