RN60C2000DRSL Equivalent & Substitute Parts

Part Overview

The RN60C2000DRSL is a 200 Ohm, 1/4W through-hole axial resistor manufactured by Vishay Dale, classified as a military-grade metal film component with flame retardant coating and moisture resistance. This part is compliant with MIL-R-10509/1 specifications and maintains an active product status. Substitute parts are identified when equivalent resistance values, power ratings, and mechanical form factors are maintained while offering improved tolerance specifications or alternative packaging configurations.

Substiute Parts

RN60C2000DRSL

Vishay DaleIn Stock: 801RN60C2000DRSL Datasheet

Current PartRFQ

RN60E2000BB14

Vishay DaleIn Stock: 1658RN60E2000BB14 Datasheet

UpgradeRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the RN60C2000DRSL is determined by the following criteria:

Primary Matching Parameters:

• Resistance value: 200 Ohms (exact match required)
• Power rating: 0.25W / 1/4W (exact match required)
• Package type: Axial through-hole (exact match required)
• Physical dimensions: 0.145" Dia × 0.344" L (exact match required)
• Composition: Metal Film (exact match required)
• Operating temperature range: -65°C to 175°C (minimum requirement)
• Series compliance: MIL-R-10509/1, RN60 base product family

Allowable Variation Parameters:

• Tolerance: May be equal or tighter (lower tolerance values are acceptable)
• Temperature coefficient: May be equal or lower (improved stability is acceptable)
• Packaging format: Tape & Reel or Bulk configurations are interchangeable for the same component
• Inventory availability: Does not affect substitution eligibility

The RN60E2000BB14 qualifies as a direct substitute because it maintains all primary matching parameters while offering improved tolerance (±0.1% versus ±0.5%) and superior temperature coefficient stability (±25ppm/°C versus ±50ppm/°C).

Parameter Comparison

Engineering Selection Recommendations

Both the RN60C2000DRSL and RN60E2000BB14 maintain active product status and identical compliance classifications (RoHS non-compliant, REACH Affected, ECCN EAR99). The RN60E2000BB14 provides enhanced performance characteristics through tighter tolerance specification (±0.1% versus ±0.5%) and improved temperature coefficient stability (±25ppm/°C versus ±50ppm/°C), while maintaining full mechanical and electrical compatibility. Selection between these parts depends on application-specific tolerance and stability requirements rather than availability or compliance constraints.

Frequently Asked Questions (FAQ)

Q: Can RN60E2000BB14 be used as a direct replacement for RN60C2000DRSL?

A: Yes. Both parts share identical resistance value (200 Ohms), power rating (0.25W), axial package configuration, physical dimensions (0.145" Dia × 0.344" L), operating temperature range (-65°C to 175°C), and military series classification (MIL-R-10509/1, RN60). The RN60E2000BB14 offers improved tolerance and temperature coefficient performance.

Q: What are the key differences between these parts?

A: The primary differences are tolerance specification (±0.5% versus ±0.1%), temperature coefficient (±50ppm/°C versus ±25ppm/°C), and packaging format (Tape & Reel versus Bulk). All other electrical and mechanical parameters are identical.

Q: Does packaging format affect substitution eligibility?

A: No. Tape & Reel and Bulk packaging formats represent different distribution methods for the same component. Both formats are suitable for substitution provided all other parameters match.

Q: Are there any compliance or certification differences?

A: No. Both parts share identical RoHS status (non-compliant), REACH status (Affected), and ECCN classification (EAR99).

Q: Which part should be selected for high-precision applications?

A: The RN60E2000BB14 is appropriate for applications requiring tighter tolerance control and improved temperature stability due to its ±0.1% tolerance and ±25ppm/°C temperature coefficient.