RN60C2000DB14 Equivalent & Substitute Parts

Part Overview

The RN60C2000DB14 is a 200 Ohm, 1/4W through-hole axial resistor manufactured by Vishay Dale, designed for military applications per MIL-R-10509/1 specification. This metal film resistor features flame retardant coating, moisture resistance, and safety-rated construction suitable for demanding environments. The part is currently active in production with 871 pieces available in inventory.

Substitute parts are identified when electrical and mechanical parameters remain compatible within the allowable tolerances and specifications for this resistor category, enabling component interchangeability in circuit designs.

Substiute Parts

RN60C2000DB14

Vishay DaleIn Stock: 970RN60C2000DB14 Datasheet

Current PartRFQ

RN60E2000BB14

Vishay DaleIn Stock: 1658RN60E2000BB14 Datasheet

UpgradeRFQ

Key Parameters

Substitute Part Grouping Explanation

The RN60E2000BB14 qualifies as a direct substitute for the RN60C2000DB14 based on the following critical parameters:

• Resistance Value: Both parts are 200 Ohms, ensuring identical nominal resistance in circuit applications
• Power Rating: Both rated at 0.25W (1/4W), maintaining equivalent power dissipation capability
• Composition: Both are metal film resistors with identical construction methodology
• Package Type: Both use axial through-hole packaging with identical physical dimensions (0.145" Dia x 0.344" L)
• Operating Temperature Range: Both operate across -65°C to 175°C, ensuring thermal compatibility
• Series Compliance: Both conform to Military MIL-R-10509/1 specification and RN60 series standards
• Features: Both include flame retardant coating, moisture resistance, and safety ratings

The RN60E2000BB14 represents an upgrade path with improved tolerance (±0.1% versus ±0.5%) and lower temperature coefficient (±25ppm/°C versus ±50ppm/°C), while maintaining full mechanical and electrical compatibility.

Parameter Comparison

Engineering Selection Recommendations

Both the RN60C2000DB14 and RN60E2000BB14 are active production parts from Vishay Dale with identical military qualification and compliance status. Selection between these parts depends on circuit tolerance requirements:

The RN60C2000DB14 is appropriate for applications where ±0.5% tolerance meets design specifications and cost optimization is prioritized.

The RN60E2000BB14 is suitable for applications requiring tighter tolerance control (±0.1%) and improved temperature stability (±25ppm/°C), providing enhanced performance margin in precision circuits while maintaining full mechanical and thermal compatibility.

Both parts maintain identical RoHS non-compliant and REACH Affected status, requiring equivalent compliance documentation for procurement and deployment.

Frequently Asked Questions (FAQ)

Q: Can RN60E2000BB14 directly replace RN60C2000DB14 in existing designs?

A: Yes. Both parts share identical resistance value (200 Ohms), power rating (0.25W), axial package dimensions (0.145" Dia x 0.344" L), and operating temperature range (-65°C to 175°C). Physical and electrical interchangeability is complete.

Q: What is the primary difference between these two parts?

A: The RN60E2000BB14 provides improved tolerance (±0.1% versus ±0.5%) and lower temperature coefficient (±25ppm/°C versus ±50ppm/°C). Both maintain identical military specifications and physical form factor.

Q: Are there any compliance or certification differences?

A: No. Both parts are RoHS non-compliant and REACH Affected with identical military MIL-R-10509/1 qualification and RN60 series compliance.

Q: Which part should be selected for high-precision applications?

A: The RN60E2000BB14 is specified for applications requiring tighter tolerance control and improved temperature stability due to its ±0.1% tolerance and ±25ppm/°C temperature coefficient.

Q: Are the physical dimensions identical?

A: Yes. Both parts measure 0.145" diameter by 0.344" length (3.68mm x 8.74mm) and use identical axial through-hole packaging, ensuring mechanical compatibility in PCB layouts.