RN60C2000CB14 Equivalent & Substitute Parts

Part Overview

The RN60C2000CB14 is a 200 Ohm, 1/4W through-hole axial resistor manufactured by Vishay Dale, designed for military applications per MIL-R-10509/1 specification. This metal film resistor features flame retardant coating, moisture resistance, and safety-rated construction with ±0.25% tolerance. The component is currently active in production with 925 units in stock. Substitute parts are identified when equivalent resistance values, power ratings, and package configurations are maintained while offering improved electrical performance or enhanced availability.

Substiute Parts

RN60C2000CB14

Vishay DaleIn Stock: 966RN60C2000CB14 Datasheet

Current PartRFQ

RN60E2000BB14

Vishay DaleIn Stock: 1658RN60E2000BB14 Datasheet

UpgradeRFQ

Key Parameters

Substitute Part Grouping Explanation

The RN60E2000BB14 qualifies as a direct substitute for the RN60C2000CB14 based on the following substitution criteria:

Matching Parameters (Required for Substitution):

• Resistance value: 200 Ohms (identical)
• Power rating: 0.25W, 1/4W (identical)
• Package type: Axial (identical)
• Physical dimensions: 0.145" Dia x 0.344" L / 3.68mm x 8.74mm (identical)
• Composition: Metal Film (identical)
• Series: Military, MIL-R-10509/1, RN60 (identical)
• Operating temperature range: -65°C to 175°C (identical)
• Features: Flame Retardant Coating, Military, Moisture Resistant, Safety (identical)

Enhanced Performance Characteristics:

• Tolerance: ±0.1% (improved from ±0.25%)
• Temperature coefficient: ±25ppm/°C (improved from ±50ppm/°C)

Parameter Comparison

Engineering Selection Recommendations

Both the RN60C2000CB14 and RN60E2000BB14 are active military-grade components manufactured by Vishay Dale under the MIL-R-10509/1 specification. The RN60E2000BB14 provides improved tolerance (±0.1% versus ±0.25%) and lower temperature coefficient (±25ppm/°C versus ±50ppm/°C) while maintaining identical resistance, power rating, package configuration, and operating temperature range. Both components share identical RoHS and REACH compliance status. Selection between these parts depends on circuit tolerance requirements and application precision specifications.

Frequently Asked Questions (FAQ)

Q: Can RN60E2000BB14 be used as a direct replacement for RN60C2000CB14?

A: Yes. Both components share identical resistance (200 Ohms), power rating (0.25W), package type (Axial), physical dimensions (0.145" Dia x 0.344" L), operating temperature range (-65°C to 175°C), and military specifications (MIL-R-10509/1). The RN60E2000BB14 offers improved tolerance and temperature coefficient performance.

Q: What are the key differences between these two resistors?

A: The primary differences are tolerance and temperature coefficient. The RN60E2000BB14 provides ±0.1% tolerance compared to ±0.25% for the RN60C2000CB14, and a temperature coefficient of ±25ppm/°C versus ±50ppm/°C. All other electrical and mechanical parameters are identical.

Q: Are there any package or footprint differences?

A: No. Both components use identical Axial package configuration with matching physical dimensions of 0.145" Dia x 0.344" L (3.68mm x 8.74mm). Direct board-level substitution is possible without layout modifications.

Q: Do these components have the same compliance certifications?

A: Yes. Both the RN60C2000CB14 and RN60E2000BB14 share identical RoHS non-compliant and REACH Affected status. Compliance requirements remain unchanged when substituting between these parts.

Q: Which part should be selected for high-precision applications?

A: The RN60E2000BB14 is suitable for applications requiring tighter tolerance control due to its ±0.1% tolerance specification and lower temperature coefficient of ±25ppm/°C, compared to the RN60C2000CB14's ±0.25% tolerance and ±50ppm/°C temperature coefficient.