RN60C1502FRSL Equivalent & Substitute Parts

Part Overview

The RN60C1502FRSL is a 15 kOhms ±1% metal film through-hole resistor rated at 0.25W (1/4W) in axial package configuration. This component is manufactured by Vishay Dale under the military-grade RN60 series (MIL-R-10509/1) and features flame retardant coating with moisture-resistant properties suitable for military applications. The part maintains active product status with 1018 units currently in stock. Substitute parts are identified when packaging format differs while all critical electrical and mechanical parameters remain identical.

Substiute Parts

RN60C1502FRSL

Vishay DaleIn Stock: 1090RN60C1502FRSL Datasheet

Current PartRFQ

RN60C1502FB14

Vishay DaleIn Stock: 890RN60C1502FB14 Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

The RN60C1502FB14 qualifies as a direct substitute for the RN60C1502FRSL based on identical electrical and mechanical specifications. Both parts share the same base product number (RN60), resistance value (15 kOhms), tolerance (±1%), power rating (0.25W), composition (metal film), temperature coefficient (±50ppm/°C), operating temperature range (-65°C to 175°C), physical dimensions (0.145" Dia x 0.344" L), and military-grade feature set including flame retardant coating and moisture resistance.

The sole distinction between these parts is packaging format: RN60C1502FRSL is supplied in Tape & Reel (TR) configuration, while RN60C1502FB14 is supplied in Bulk packaging. Both maintain active product status and identical compliance profiles (RoHS non-compliant, REACH Affected, ECCN EAR99, HTSUS 8533.21.0090).

Parameter Comparison

Engineering Selection Recommendations

Both RN60C1502FRSL and RN60C1502FB14 maintain identical electrical performance and mechanical compatibility. Selection between these parts should be based on procurement and assembly requirements:

RN60C1502FRSL in Tape & Reel format is suitable for automated assembly processes requiring component feeding from tape reels. RN60C1502FB14 in Bulk packaging is appropriate for manual assembly, kit builds, or applications where tape reel format is not required.

Both parts carry active product status and identical compliance certifications. No electrical or thermal performance differences exist between these substitutes.

Frequently Asked Questions (FAQ)

Q: Can RN60C1502FB14 replace RN60C1502FRSL in circuit applications? A: Yes. Both parts are electrically and mechanically identical with matching resistance (15 kOhms), tolerance (±1%), power rating (0.25W), temperature coefficient (±50ppm/°C), and operating range (-65°C to 175°C). The only difference is packaging format.

Q: What is the difference between Tape & Reel and Bulk packaging? A: Tape & Reel (TR) packaging supplies components on continuous tape suitable for automated pick-and-place assembly equipment. Bulk packaging supplies loose components suitable for manual assembly or kit applications. Both formats contain identical components.

Q: Are there any compliance or certification differences between these parts? A: No. Both parts share identical RoHS status (non-compliant), REACH status (Affected), ECCN classification (EAR99), and HTSUS code (8533.21.0090).

Q: Which part should be selected for high-volume automated assembly? A: RN60C1502FRSL in Tape & Reel format is optimized for automated assembly lines. RN60C1502FB14 in Bulk format is not designed for automated feeding systems.

Q: Are the physical dimensions identical between these substitutes? A: Yes. Both parts measure 0.145" diameter by 0.344" length (3.68mm x 8.74mm) in axial configuration.