RN60C1502FRE6 Equivalent & Substitute Parts

Part Overview

The RN60C1502FRE6 is a 15 kOhm ±1% metal film through-hole resistor rated at 0.25W (1/4W) in axial package configuration. Manufactured by Vishay Dale under the military-grade RN60 series (MIL-R-10509/1), this component features flame retardant coating, moisture resistance, and safety-rated construction suitable for military and high-reliability applications. The part is currently active in production with 809 units in stock. Substitute parts are identified when packaging format differs while maintaining identical electrical and mechanical specifications, enabling procurement flexibility across different supply channels and inventory management strategies.

Substiute Parts

RN60C1502FRE6

Vishay DaleIn Stock: 826RN60C1502FRE6 Datasheet

Current PartRFQ

RN60C1502FB14

Vishay DaleIn Stock: 890RN60C1502FB14 Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the RN60C1502FRE6 is determined by strict equivalence across the following critical parameters:

• Resistance value: 15 kOhms
• Tolerance: ±1%
• Power rating: 0.25W (1/4W)
• Composition: Metal Film
• Temperature coefficient: ±50ppm/°C
• Operating temperature range: -65°C to 175°C
• Package configuration: Axial
• Physical dimensions: 0.145" Dia × 0.344" L (3.68mm × 8.74mm)
• Series: RN60 (MIL-R-10509/1)
• Features: Flame Retardant Coating, Military, Moisture Resistant, Safety

The identified substitute part differs only in packaging format (Bulk versus Tape & Reel), which does not affect electrical performance or mechanical compatibility in circuit applications. Both parts maintain identical component specifications and military-grade construction standards.

Parameter Comparison

Engineering Selection Recommendations

Both the RN60C1502FRE6 and RN60C1502FB14 are active production components manufactured by Vishay Dale with identical electrical and mechanical specifications. Selection between these parts should be based on procurement and assembly requirements:

The RN60C1502FRE6 in Tape & Reel packaging is suitable for automated assembly processes requiring continuous component feed. The RN60C1502FB14 in Bulk packaging is appropriate for manual assembly, kit builds, or applications where individual component handling is preferred.

Both parts maintain equivalent compliance status: RoHS non-compliant and REACH Affected. Neither part introduces compliance advantages over the other. Component selection should align with existing assembly infrastructure and supply chain logistics rather than technical performance considerations, as electrical and thermal characteristics are identical.

Frequently Asked Questions (FAQ)

Q: Can RN60C1502FB14 be used as a direct replacement for RN60C1502FRE6 in circuit design?

A: Yes. Both parts are electrically and mechanically identical. The only difference is packaging format (Bulk versus Tape & Reel). Circuit performance, thermal behavior, and reliability characteristics are equivalent.

Q: What is the primary difference between these substitute parts?

A: The packaging format differs. RN60C1502FRE6 is supplied in Tape & Reel format for automated pick-and-place assembly. RN60C1502FB14 is supplied in Bulk format for manual handling and assembly. Electrical specifications, physical dimensions, and component construction are identical.

Q: Are there any compliance or certification differences between these parts?

A: No. Both parts share identical RoHS and REACH status classifications. Neither part offers compliance advantages over the other.

Q: Which part should be selected for high-volume automated assembly?

A: The RN60C1502FRE6 in Tape & Reel packaging is optimized for automated assembly processes. The RN60C1502FB14 in Bulk packaging is not configured for continuous automated feed.

Q: Can these parts be intermixed in the same assembly process?

A: No. Assembly equipment must be configured for either Tape & Reel or Bulk packaging. Switching between formats requires process reconfiguration and is not practical for continuous production runs.

Q: Do physical dimensions differ between these substitute parts?

A: No. Both parts maintain identical axial package dimensions of 0.145" Dia × 0.344" L (3.68mm × 8.74mm). PCB footprint and mounting requirements are equivalent.