RN60C10R0FRE6 Equivalent & Substitute Parts

Part Overview

The RN60C10R0FRE6 is a 10 Ohm, 1/4W metal film through-hole resistor manufactured by Vishay Dale, designed for military applications per MIL-R-10509/1 specification. This axial component features flame retardant coating, moisture resistance, and safety-rated construction. The part is currently active in production with 1269 units in stock. Substitute parts are identified to address specific application requirements such as tighter tolerance specifications or alternative packaging configurations while maintaining core electrical and mechanical compatibility.

Substiute Parts

RN60C10R0FRE6

Vishay DaleIn Stock: 1343RN60C10R0FRE6 Datasheet

Current PartRFQ

RN60E10R0BB14

Vishay DaleIn Stock: 1537RN60E10R0BB14 Datasheet

UpgradeRFQ

Key Parameters

Substitute Part Grouping Explanation

The RN60E10R0BB14 qualifies as a substitute for the RN60C10R0FRE6 based on the following critical parameters:

• Resistance Value: Both parts are 10 Ohms
• Power Rating: Both rated at 0.25W (1/4W)
• Composition: Both are metal film construction
• Operating Temperature Range: Both operate from -65°C to 175°C
• Package Type: Both use axial through-hole configuration
• Physical Dimensions: Identical at 0.145" Dia × 0.344" L (3.68mm × 8.74mm)
• Series Compliance: Both conform to Military MIL-R-10509/1 specification and RN60 series

The RN60E10R0BB14 provides an upgrade path with improved tolerance (±0.1% versus ±1%) and lower temperature coefficient (±25ppm/°C versus ±50ppm/°C), while maintaining all core electrical and mechanical compatibility parameters.

Parameter Comparison

Engineering Selection Recommendations

Both the RN60C10R0FRE6 and RN60E10R0BB14 are active production components from Vishay Dale with identical military qualification and compliance status. Selection between these parts depends on application-specific tolerance and temperature stability requirements:

• RN60C10R0FRE6: Select for applications where ±1% tolerance and ±50ppm/°C temperature coefficient meet design specifications and where cut tape packaging is required for automated assembly processes.

• RN60E10R0BB14: Select for applications requiring tighter tolerance control (±0.1%) and improved temperature stability (±25ppm/°C). This substitute is suitable when precision analog circuits or temperature-compensated designs demand reduced component drift. Bulk packaging format requires manual handling or reel conversion for automated placement.

Both parts maintain identical electrical performance within their respective tolerance bands across the full -65°C to 175°C operating range and are suitable for direct substitution in military and aerospace applications requiring MIL-R-10509/1 compliance.

Frequently Asked Questions (FAQ)

Q: Can RN60E10R0BB14 be used as a direct replacement for RN60C10R0FRE6?

A: Yes. Both parts share identical resistance value (10 Ohms), power rating (0.25W), operating temperature range (-65°C to 175°C), physical dimensions (0.145" Dia × 0.344" L), and military series compliance (MIL-R-10509/1, RN60). The RN60E10R0BB14 provides improved tolerance and temperature coefficient specifications.

Q: What is the primary difference between these two parts?

A: The RN60E10R0BB14 offers tighter tolerance (±0.1% versus ±1%) and lower temperature coefficient (±25ppm/°C versus ±50ppm/°C). Packaging format differs: RN60C10R0FRE6 is supplied in cut tape, while RN60E10R0BB14 is supplied in bulk.

Q: Are there any compatibility concerns with axial package dimensions?

A: No. Both parts have identical axial dimensions of 0.145" Dia × 0.344" L (3.68mm × 8.74mm) and are mechanically interchangeable in through-hole PCB layouts.

Q: Do both parts meet the same military specifications?

A: Yes. Both parts conform to Military MIL-R-10509/1 specification and belong to the RN60 series. Both feature flame retardant coating, moisture resistance, and safety-rated construction.

Q: What packaging considerations apply to substitution?

A: RN60C10R0FRE6 is supplied in cut tape format suitable for automated pick-and-place assembly. RN60E10R0BB14 is supplied in bulk format, requiring manual handling or reel conversion for automated processes. This is a logistical consideration only and does not affect electrical or mechanical compatibility.

Q: Which part should be selected for precision analog applications?

A: The RN60E10R0BB14 is the appropriate selection for precision applications due to its ±0.1% tolerance and ±25ppm/°C temperature coefficient, providing superior stability and accuracy compared to the ±1% tolerance and ±50ppm/°C coefficient of the RN60C10R0FRE6.