RN60C1003CBSL Equivalent & Substitute Parts

Part Overview

The RN60C1003CBSL is a 100 kOhms ±0.25% metal film axial through-hole resistor rated at 0.25W (1/4W) manufactured by Vishay Dale. This component is part of the military-grade RN60 series, featuring flame retardant coating, moisture resistance, and safety certification. The part is currently active in production with 772 units in stock.

Substitute parts are identified to address packaging availability, tolerance requirements, or inventory considerations while maintaining electrical and mechanical compatibility within the RN60 series specifications.

Substiute Parts

RN60C1003CBSL

Vishay DaleIn Stock: 794RN60C1003CBSL Datasheet

Current PartRFQ

RN60C1003BB14

Vishay DaleIn Stock: 1128RN60C1003BB14 Datasheet

UpgradeRFQ

RN60C1003BRE6

Vishay DaleIn Stock: 1914RN60C1003BRE6 Datasheet

UpgradeRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the RN60C1003CBSL is determined by the following critical parameters:

• Resistance Value: Must be 100 kOhms (exact match required)
• Power Rating: Must be 0.25W (1/4W) minimum
• Package Type: Must be Axial through-hole configuration
• Physical Dimensions: Must be 0.145" Dia × 0.344" L (3.68mm × 8.74mm)
• Temperature Coefficient: Must be ±50ppm/°C
• Operating Temperature Range: Must support -65°C to 175°C
• Series Compliance: Must belong to RN60 military series with MIL-R-10509/1 certification
• Composition: Must be metal film construction

Tolerance is not a limiting substitution criterion; parts with equal or tighter tolerance specifications (lower tolerance values) are electrically compatible. Packaging format (Bulk vs. Cut Tape/Tape & Reel) does not affect electrical or mechanical compatibility.

Parameter Comparison

Engineering Selection Recommendations

All three parts—RN60C1003CBSL, RN60C1003BB14, and RN60C1003BRE6—are active production components within the Vishay Dale RN60 military series. They share identical electrical specifications, physical dimensions, and environmental ratings.

The primary differences are tolerance specification and packaging format:

• RN60C1003CBSL provides ±0.25% tolerance in Bulk packaging
• RN60C1003BB14 provides ±0.1% tolerance in Bulk packaging
• RN60C1003BRE6 provides ±0.1% tolerance in Cut Tape/Tape & Reel packaging

Selection should be based on circuit tolerance requirements and procurement packaging needs. Parts with tighter tolerance (±0.1%) are suitable for applications requiring higher precision. Packaging format selection depends on assembly process requirements and inventory management practices.

Frequently Asked Questions (FAQ)

Q: Can RN60C1003BB14 or RN60C1003BRE6 be used as direct replacements for RN60C1003CBSL?

A: Yes. Both substitute parts meet all electrical and mechanical compatibility criteria. They maintain identical resistance value, power rating, temperature coefficient, operating temperature range, physical dimensions, and series certification. The tighter tolerance specification (±0.1% vs. ±0.25%) represents an improvement in precision.

Q: What is the difference between RN60C1003BB14 and RN60C1003BRE6?

A: Both parts are electrically and mechanically identical. The difference is packaging format: RN60C1003BB14 is supplied in Bulk packaging, while RN60C1003BRE6 is supplied in Cut Tape (CT) or Tape & Reel (TR) format. Selection depends on assembly process and procurement requirements.

Q: Does packaging format affect electrical performance?

A: No. Packaging format (Bulk, Cut Tape, or Tape & Reel) does not affect electrical characteristics, performance, or reliability. It is a logistics and assembly consideration only.

Q: Are all three parts RoHS compliant?

A: No. All three parts are RoHS non-compliant. They are REACH Affected and classified under ECCN EAR99.

Q: Can these parts be used interchangeably in military applications?

A: Yes. All three parts comply with MIL-R-10509/1 military specification and are suitable for military-grade applications. The RN60 series designation confirms military-grade construction and performance standards.

Q: What tolerance should I specify for my application?

A: Tolerance selection depends on circuit requirements. If ±0.25% tolerance is acceptable, RN60C1003CBSL is suitable. If higher precision is required, RN60C1003BB14 or RN60C1003BRE6 with ±0.1% tolerance are appropriate selections.