RN60C1001DB14 Equivalent & Substitute Parts

Part Overview

The RN60C1001DB14 is a 1 kOhms ±0.5% metal film through-hole resistor rated at 0.25W (1/4W) in axial package configuration. Manufactured by Vishay Dale under the military-grade RN60 series (MIL-R-10509/1), this component features flame retardant coating, moisture resistance, and safety certification suitable for military and high-reliability applications. The part is currently active in production with 719 units in stock.

Substitute parts are identified when equivalent electrical performance and mechanical compatibility can be maintained within the specified parameter tolerances. Two substitute options are available: one direct equivalent with different packaging, and one upgraded variant with enhanced tolerance specifications.

Substiute Parts

RN60C1001DB14

Vishay DaleIn Stock: 779RN60C1001DB14 Datasheet

Current PartRFQ

RN60C1001DRE6

Vishay DaleIn Stock: 5506RN60C1001DRE6 Datasheet

DirectRFQ

RN60E1001BB14

Vishay DaleIn Stock: 970RN60E1001BB14 Datasheet

UpgradeRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the RN60C1001DB14 is determined by the following critical parameters:

Primary Substitution Criteria:

• Resistance value: 1 kOhms (exact match required)
• Power rating: 0.25W minimum
• Composition: Metal film
• Package: Axial configuration
• Operating temperature range: -65°C to 175°C minimum
• Series compliance: MIL-R-10509/1 military specification

Acceptable Variations:

• Tolerance: Equal to or tighter than ±0.5%
• Temperature coefficient: Equal to or lower than ±50ppm/°C
• Packaging format: Bulk or Cut Tape (CT)

The RN60C1001DRE6 qualifies as a direct equivalent with identical electrical specifications but different packaging (Cut Tape vs. Bulk). The RN60E1001BB14 qualifies as an upgrade substitute with improved tolerance (±0.1% vs. ±0.5%) and lower temperature coefficient (±25ppm/°C vs. ±50ppm/°C), maintaining all other critical parameters.

Parameter Comparison

Engineering Selection Recommendations

RN60C1001DRE6 (Direct Equivalent): This substitute maintains identical electrical and mechanical specifications to the RN60C1001DB14. Selection of this part is appropriate when packaging format (Cut Tape vs. Bulk) does not impact assembly requirements. Higher inventory availability (5462 units) supports supply chain continuity. Both parts carry equivalent military certification, RoHS non-compliance status, and REACH compliance.

RN60E1001BB14 (Upgrade Substitute): This part provides enhanced performance through tighter tolerance (±0.1% vs. ±0.5%) and improved temperature stability (±25ppm/°C vs. ±50ppm/°C). Selection is appropriate for applications requiring superior accuracy and thermal stability within the same power and temperature operating envelope. Military certification and compliance status remain equivalent to the main part. Bulk packaging matches the original specification.

Both substitutes maintain full compatibility with MIL-R-10509/1 military specification requirements and preserve all safety and reliability features of the original component.

Frequently Asked Questions (FAQ)

Q: Can RN60C1001DRE6 be used as a direct replacement for RN60C1001DB14?

A: Yes. The RN60C1001DRE6 is electrically and mechanically identical to the RN60C1001DB14. The only difference is packaging format (Cut Tape vs. Bulk). Both parts have identical resistance (1 kOhms), tolerance (±0.5%), power rating (0.25W), temperature coefficient (±50ppm/°C), and operating temperature range (-65°C to 175°C). Substitution is valid provided assembly equipment accommodates Cut Tape format.

Q: What are the advantages of using RN60E1001BB14 instead of RN60C1001DB14?

A: The RN60E1001BB14 offers improved tolerance specification (±0.1% vs. ±0.5%) and lower temperature coefficient (±25ppm/°C vs. ±50ppm/°C). These enhancements provide superior accuracy and thermal stability. All other parameters—resistance value, power rating, operating temperature range, and military certification—remain equivalent. Selection depends on application accuracy requirements.

Q: Are all three parts compliant with military specifications?

A: Yes. All three parts (RN60C1001DB14, RN60C1001DRE6, and RN60E1001BB14) are manufactured to MIL-R-10509/1 military specification and belong to the RN60 series. All carry identical military-grade features including flame retardant coating, moisture resistance, and safety certification.

Q: What is the difference between Bulk and Cut Tape packaging?

A: Bulk packaging supplies loose components suitable for manual assembly or bulk handling. Cut Tape (CT) packaging supplies components on continuous tape in individual pockets, optimized for automated pick-and-place assembly equipment. Electrical and mechanical specifications are identical; packaging selection depends on assembly process requirements.

Q: Can RN60E1001BB14 be substituted in applications originally designed for RN60C1001DB14?

A: Yes. The RN60E1001BB14 is a compatible upgrade substitute. It maintains the same resistance value (1 kOhms), power rating (0.25W), package type (Axial), and operating temperature range (-65°C to 175°C). The improved tolerance and temperature coefficient represent performance enhancements that do not compromise compatibility with the original design specification.

Q: Are there any compliance or certification differences between these parts?

A: No. All three parts share identical RoHS non-compliance status, REACH compliance status, ECCN classification (EAR99), and HTSUS code (8533.21.0090). Military certification and safety features are equivalent across all three variants.