RN60C1000CBSL Equivalent & Substitute Parts

Part Overview

The RN60C1000CBSL is a 100 Ohm, 1/4W through-hole axial resistor manufactured by Vishay Dale, designed for military applications per MIL-R-10509/1 specification. This metal film resistor features flame retardant coating, moisture resistance, and safety characteristics suitable for demanding environments. The part is currently active in production with 794 units in stock. Substitute parts are identified to address inventory availability, tolerance requirements, or temperature coefficient specifications while maintaining electrical and mechanical compatibility.

Substiute Parts

RN60C1000CBSL

Vishay DaleIn Stock: 865RN60C1000CBSL Datasheet

Current PartRFQ

RN60C1000BB14

Vishay DaleIn Stock: 1184RN60C1000BB14 Datasheet

UpgradeRFQ

RN60E1000BB14

Vishay DaleIn Stock: 1190RN60E1000BB14 Datasheet

UpgradeRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the RN60C1000CBSL are qualified based on the following criteria:

Electrical Compatibility: All substitute parts maintain the same resistance value (100 Ohms) and power rating (0.25W). Tolerance and temperature coefficient variations are permitted within the scope of military-grade metal film resistor specifications.

Mechanical Compatibility: All substitute parts share identical package type (Axial), physical dimensions (0.145" Dia × 0.344" L), and termination count (2), ensuring direct mechanical interchangeability in PCB layouts and through-hole applications.

Material & Environmental Compliance: All parts are metal film composition with flame retardant coating, moisture resistance, and military-grade safety features. Operating temperature range remains -65°C to 175°C across all variants.

Series Designation: All parts belong to the RN60 military series under MIL-R-10509/1 specification, confirming functional equivalence for military applications.

Key Differentiators: Tolerance (±0.25% vs. ±0.1%) and temperature coefficient (±50ppm/°C vs. ±25ppm/°C) distinguish the main part from upgrade substitutes. These parameters determine suitability based on circuit precision requirements.

Parameter Comparison

Engineering Selection Recommendations

RN60C1000CBSL (Primary Part): Select this part for applications requiring standard military-grade tolerance (±0.25%) with moderate temperature coefficient performance (±50ppm/°C). All three variants are active production parts with established supply chains.

RN60C1000BB14 (Direct Upgrade): This substitute provides improved tolerance (±0.1%) while maintaining the same temperature coefficient (±50ppm/°C) and identical physical form factor. Suitable for circuits requiring tighter resistance accuracy without temperature coefficient constraints.

RN60E1000BB14 (Enhanced Upgrade): This substitute offers both improved tolerance (±0.1%) and superior temperature coefficient performance (±25ppm/°C). Select this part for precision circuits operating across wide temperature ranges where drift minimization is critical. All three parts maintain identical RoHS and REACH compliance status.

Frequently Asked Questions (FAQ)

Q: Can RN60C1000BB14 and RN60E1000BB14 be used interchangeably with RN60C1000CBSL?

A: Yes, both substitutes are mechanically and electrically compatible. They share identical resistance value, power rating, package type, and physical dimensions. The primary differences are tolerance (±0.1% vs. ±0.25%) and temperature coefficient (±50ppm/°C vs. ±25ppm/°C for RN60E1000BB14). Substitution is valid when circuit specifications permit these parameter variations.

Q: What is the difference between RN60C1000BB14 and RN60E1000BB14?

A: Both parts have improved tolerance (±0.1%) compared to the main part. The key distinction is temperature coefficient: RN60C1000BB14 maintains ±50ppm/°C, while RN60E1000BB14 provides superior stability at ±25ppm/°C. Select RN60E1000BB14 for applications sensitive to temperature-induced resistance drift.

Q: Are all three parts suitable for military applications?

A: Yes. All three parts are manufactured to MIL-R-10509/1 specification and belong to the RN60 military series. They feature identical flame retardant coating, moisture resistance, and safety characteristics required for military-grade applications.

Q: Do physical dimensions differ between these parts?

A: No. All three parts have identical axial package dimensions of 0.145" Dia × 0.344" L (3.68mm × 8.74mm), ensuring direct mechanical interchangeability in PCB layouts and through-hole designs.

Q: What compliance certifications apply to all three parts?

A: All three parts share identical RoHS non-compliant and REACH Affected status. They are classified under ECCN EAR99 and HTSUS 8533.21.0090. Compliance requirements should be verified against specific application and regional regulations.