RN55E1000FRE6 Equivalent & Substitute Parts

Part Overview

The RN55E1000FRE6 is a 100 Ohm, 1/8W metal film axial resistor manufactured by Vishay Dale, designed for military applications per MIL-R-10509/7 specification. This component features flame retardant coating, moisture resistance, and safety-rated construction suitable for high-reliability electronic assemblies. The part is currently active in production with 804 units in stock. Substitute parts are identified to provide procurement flexibility while maintaining electrical and mechanical compatibility for applications requiring equivalent performance characteristics.

Substiute Parts

RN55E1000FRE6

Vishay DaleIn Stock: 895RN55E1000FRE6 Datasheet

Current PartRFQ

RN55E1000FB14

Vishay DaleIn Stock: 910RN55E1000FB14 Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the RN55E1000FRE6 is based on strict equivalence of the following critical parameters:

• Resistance value: 100 Ohms
• Tolerance: ±1%
• Power rating: 0.125W (1/8W)
• Composition: Metal Film
• Temperature coefficient: ±25ppm/°C
• Operating temperature range: -65°C to 175°C
• Package configuration: Axial
• Physical dimensions: 0.090" Dia × 0.240" L
• Series compliance: MIL-R-10509/7, RN55
• Feature set: Flame Retardant Coating, Military, Moisture Resistant, Safety

The substitute part RN55E1000FB14 maintains identical electrical specifications and mechanical form factor. The primary difference is packaging format: the main part is supplied in Tape & Reel (TR) configuration, while the substitute is supplied in Bulk packaging. Both parts are manufactured by Vishay Dale under the same military series designation.

Parameter Comparison

Engineering Selection Recommendations

Both the RN55E1000FRE6 and RN55E1000FB14 are active production parts manufactured by Vishay Dale with identical electrical and mechanical specifications. Selection between these parts should be based on procurement and assembly requirements:

The RN55E1000FRE6 in Tape & Reel packaging is suitable for automated assembly processes requiring continuous component feed. The RN55E1000FB14 in Bulk packaging is appropriate for manual assembly, repair operations, or applications where tape packaging is not required.

Both parts maintain compliance with MIL-R-10509/7 military specification and carry identical RoHS non-compliant and REACH Affected designations. Inventory availability should be evaluated based on project timeline and volume requirements: RN55E1000FRE6 has 804 units in stock, while RN55E1000FB14 has 898 units in stock.

Frequently Asked Questions (FAQ)

Q: Can RN55E1000FB14 be used as a direct replacement for RN55E1000FRE6?

A: Yes. Both parts are electrically and mechanically identical, with 100 Ohm resistance, ±1% tolerance, 0.125W power rating, and identical physical dimensions. The only difference is packaging format: Tape & Reel versus Bulk.

Q: What is the primary difference between these two part numbers?

A: The packaging format differs. RN55E1000FRE6 is supplied in Tape & Reel (TR) configuration for automated assembly, while RN55E1000FB14 is supplied in Bulk packaging for manual assembly or repair applications.

Q: Are there any compliance or certification differences between these parts?

A: No. Both parts share identical RoHS non-compliant and REACH Affected status, and both comply with MIL-R-10509/7 military specification.

Q: Can these parts be used interchangeably in circuit design?

A: Yes. Electrical performance is identical across all specified parameters: resistance, tolerance, temperature coefficient, operating temperature range, and power rating.

Q: Which part should be selected for high-volume automated assembly?

A: RN55E1000FRE6 in Tape & Reel packaging is designed for automated pick-and-place assembly processes.

Q: Which part should be selected for manual assembly or repair?

A: RN55E1000FB14 in Bulk packaging is suitable for manual assembly, repair operations, or applications where tape packaging is not required.