RN55D9762FRE6 Equivalent & Substitute Parts

Part Overview

The RN55D9762FRE6 is a 97.6 kOhms ±1% metal film through-hole resistor rated at 0.125W (1/8W) in axial package configuration. Manufactured by Vishay Dale under the military-grade RN55 series (MIL-R-10509/7), this component features flame retardant coating, moisture resistance, and safety-rated construction suitable for military and high-reliability applications. The part maintains active product status with 922 units in current inventory. Substitute parts are identified when packaging format differs while maintaining identical electrical and mechanical specifications, enabling procurement flexibility across tape & reel and bulk distribution channels.

Substiute Parts

RN55D9762FRE6

Vishay DaleIn Stock: 1031RN55D9762FRE6 Datasheet

Current PartRFQ

RN55D9762FB14

Vishay DaleIn Stock: 866RN55D9762FB14 Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution between RN55D9762FRE6 and RN55D9762FB14 is valid based on identical electrical and mechanical parameters. Both parts share the same resistance value (97.6 kOhms), tolerance (±1%), power rating (0.125W), composition (metal film), axial package configuration, temperature coefficient (±100ppm/°C), operating temperature range (-65°C to 175°C), physical dimensions (0.090" Dia x 0.240" L), and military series designation (MIL-R-10509/7, RN55). The sole difference is packaging format: RN55D9762FRE6 is supplied in tape & reel (TR) configuration, while RN55D9762FB14 is supplied in bulk. Both maintain active product status and identical compliance profiles (RoHS non-compliant, REACH Affected, ECCN EAR99, HTSUS 8533.21.0090).

Parameter Comparison

Engineering Selection Recommendations

Selection between RN55D9762FRE6 and RN55D9762FB14 is determined by procurement and assembly requirements rather than electrical performance. RN55D9762FRE6 in tape & reel packaging is suitable for automated pick-and-place assembly operations and high-volume production environments. RN55D9762FB14 in bulk packaging is appropriate for manual assembly, repair operations, or applications where component quantities do not justify tape & reel procurement. Both parts maintain identical compliance status (RoHS non-compliant, REACH Affected, ECCN EAR99) and are suitable for military and high-reliability circuit applications. Active product status confirms ongoing manufacturer support and supply availability for both variants.

Frequently Asked Questions (FAQ)

Q: Can RN55D9762FB14 (bulk) be used as a direct replacement for RN55D9762FRE6 (tape & reel)?

A: Yes. Both parts are electrically and mechanically identical. The difference is packaging format only. Bulk packaging is suitable for manual assembly or low-volume applications, while tape & reel is optimized for automated assembly lines.

Q: Are there any electrical performance differences between these two part numbers?

A: No. Both parts share identical resistance value (97.6 kOhms), tolerance (±1%), power rating (0.125W), temperature coefficient (±100ppm/°C), and operating temperature range (-65°C to 175°C).

Q: Do both parts meet the same military and compliance standards?

A: Yes. Both RN55D9762FRE6 and RN55D9762FB14 are manufactured to MIL-R-10509/7 specifications and carry identical compliance designations (RoHS non-compliant, REACH Affected, ECCN EAR99, HTSUS 8533.21.0090).

Q: What is the physical size of these resistors?

A: Both parts measure 0.090" diameter by 0.240" length (2.29mm x 6.10mm) in axial configuration, ensuring identical PCB footprint and mounting compatibility.

Q: Which packaging format should I select for my application?

A: Select tape & reel (RN55D9762FRE6) for automated assembly environments. Select bulk (RN55D9762FB14) for manual assembly, repair, or prototyping applications where component quantities are lower.