RN55D9092FRE6 Equivalent & Substitute Parts

Part Overview

The RN55D9092FRE6 is a 90.9 kOhms ±1% metal film through-hole resistor rated at 0.125W (1/8W) in axial package configuration. Manufactured by Vishay Dale under the military-grade RN55 series per MIL-R-10509/7 specification, this component features flame retardant coating, moisture resistance, and safety-rated construction suitable for military and high-reliability applications. The part is currently active in production with 845 units in stock. Substitute parts are identified to provide alternative sourcing options when the primary packaging format (Tape & Reel) is unavailable or when bulk quantities are required.

Substiute Parts

RN55D9092FRE6

Vishay DaleIn Stock: 945RN55D9092FRE6 Datasheet

Current PartRFQ

RN55D9092FB14

Vishay DaleIn Stock: 1140RN55D9092FB14 Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the RN55D9092FRE6 is determined by strict equivalence across the following parameters:

• Resistance value: 90.9 kOhms (exact match required)
• Tolerance: ±1% (exact match required)
• Power rating: 0.125W / 1/8W (exact match required)
• Composition: Metal Film (exact match required)
• Package type: Axial (exact match required)
• Temperature coefficient: ±100ppm/°C (exact match required)
• Operating temperature range: -65°C to 175°C (exact match required)
• Series compliance: Military, MIL-R-10509/7, RN55 (exact match required)
• Features: Flame Retardant Coating, Military, Moisture Resistant, Safety (exact match required)
• Physical dimensions: 0.090" Dia x 0.240" L (exact match required)

The identified substitute part RN55D9092FB14 meets all electrical and mechanical parameters. The primary difference is packaging format: the main part is supplied in Tape & Reel (TR) configuration, while the substitute is supplied in Bulk packaging. Both parts are manufactured by Vishay Dale and maintain identical electrical performance and military-grade specifications.

Parameter Comparison

Engineering Selection Recommendations

Both RN55D9092FRE6 and RN55D9092FB14 are active production parts manufactured by Vishay Dale with identical electrical specifications and military-grade compliance. Selection between these parts is determined by packaging requirements and inventory availability:

• RN55D9092FRE6 is appropriate for automated assembly processes requiring tape and reel packaging format.
• RN55D9092FB14 is appropriate for manual assembly, kit builds, or applications where bulk packaging is acceptable.

Both parts maintain RoHS non-compliant status and REACH Affected classification. Both are subject to EAR99 export control classification. No electrical performance difference exists between these parts; substitution is purely a packaging and sourcing consideration.

Frequently Asked Questions (FAQ)

Q: Can RN55D9092FB14 be used as a direct replacement for RN55D9092FRE6?

A: Yes. Both parts are electrically and mechanically identical. The only difference is packaging format: Tape & Reel versus Bulk. Electrical performance, tolerance, power rating, temperature range, and all other functional parameters are equivalent.

Q: What is the difference between Tape & Reel and Bulk packaging?

A: Tape & Reel (TR) packaging supplies components on continuous carrier tape wound on reels, optimized for automated pick-and-place assembly equipment. Bulk packaging supplies loose components in quantities suitable for manual assembly or kit distribution. Both formats contain identical components.

Q: Are there any compliance or certification differences between these parts?

A: No. Both parts share identical RoHS status (non-compliant), REACH status (Affected), and ECCN classification (EAR99). Military-grade specifications and certifications are equivalent.

Q: Which part should be selected for high-volume production?

A: RN55D9092FRE6 in Tape & Reel format is standard for automated assembly lines. RN55D9092FB14 in Bulk format may be selected if tape and reel packaging is unavailable or if manual assembly processes are employed.

Q: Are the physical dimensions identical?

A: Yes. Both parts measure 0.090" diameter by 0.240" length (2.29mm x 6.10mm). Axial package configuration and termination count (2) are identical.