RN55D2000FR36 Equivalent & Substitute Parts

Part Overview

The RN55D2000FR36 is a 200 Ohm, 1/8W metal film axial resistor manufactured by Vishay Dale, designed for military and high-reliability applications. This component features flame retardant coating, moisture resistance, and compliance with MIL-R-10509/7 specifications. The part is currently active in production with 868 units in stock. Substitute parts are identified when packaging format changes or inventory constraints require alternative sourcing while maintaining identical electrical and mechanical performance.

Substiute Parts

RN55D2000FR36

Vishay DaleIn Stock: 957RN55D2000FR36 Datasheet

Current PartRFQ

RN55D2000FRE6

Vishay DaleIn Stock: 2991RN55D2000FRE6 Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution for the RN55D2000FR36 is determined by equivalence in the following critical parameters:

• Resistance value: 200 Ohms
• Tolerance: ±1%
• Power rating: 0.125W (1/8W)
• Composition: Metal Film
• Temperature coefficient: ±100ppm/°C
• Operating temperature range: -65°C to 175°C
• Package configuration: Axial through-hole
• Physical dimensions: 0.090" Dia × 0.240" L
• Military series compliance: MIL-R-10509/7, RN55
• Feature set: Flame retardant coating, moisture resistance, safety rating

The RN55D2000FRE6 qualifies as a parametric equivalent because it maintains identical electrical specifications and physical dimensions. The only difference is packaging format: the main part is supplied in Tape & Reel (TR) configuration, while the substitute is supplied in Cut Tape (CT) configuration. Both formats contain the same component with no electrical or mechanical variation.

Parameter Comparison

Engineering Selection Recommendations

Both the RN55D2000FR36 and RN55D2000FRE6 are active production components from Vishay Dale with identical electrical and mechanical specifications. Selection between these parts depends on packaging requirements and inventory availability:

• RN55D2000FR36 (Tape & Reel): Suitable for automated assembly processes requiring continuous reel feeding. Current inventory: 868 units.
• RN55D2000FRE6 (Cut Tape): Suitable for manual assembly, small-batch production, or applications where individual component handling is preferred. Current inventory: 2940 units.

Both parts maintain compliance with MIL-R-10509/7 military specifications and share identical RoHS and REACH compliance status. No electrical performance difference exists between the two packaging formats.

Frequently Asked Questions (FAQ)

Q: Can RN55D2000FRE6 be used as a direct replacement for RN55D2000FR36?

A: Yes. Both parts are electrically and mechanically identical. The only difference is packaging format (Cut Tape versus Tape & Reel). Direct substitution is valid for any application where the component specifications are met.

Q: What is the difference between Tape & Reel and Cut Tape packaging?

A: Tape & Reel (TR) packaging supplies components on a continuous reel suitable for automated pick-and-place assembly equipment. Cut Tape (CT) packaging supplies individual components or small quantities cut from tape, suitable for manual assembly or low-volume production. Both formats contain the same component with no electrical or performance variation.

Q: Are there any compliance differences between these parts?

A: No. Both parts share identical RoHS non-compliant and REACH Affected status. Military series compliance (MIL-R-10509/7, RN55) applies to both.

Q: Which part should be selected based on inventory?

A: Selection should be based on assembly process requirements. RN55D2000FRE6 has higher current inventory (2940 units) compared to RN55D2000FR36 (868 units). If packaging format is not a constraint, the substitute part offers greater availability.

Q: Do these parts have identical temperature performance?

A: Yes. Both parts operate across -65°C to 175°C with identical temperature coefficient of ±100ppm/°C.