RN55C8062FBSL Equivalent & Substitute Parts

Part Overview

The RN55C8062FBSL is an 80.6 kOhms ±1% metal film through-hole resistor rated at 0.125W (1/8W) in axial package configuration. This component is manufactured by Vishay Dale and conforms to military specification MIL-R-10509/7. The resistor features flame retardant coating, moisture resistance, and safety-rated construction suitable for military and high-reliability applications. The part is currently active and available in inventory. Substitute parts are identified to provide alternative sourcing options when the primary part number becomes unavailable or when inventory constraints require component alternatives that maintain identical electrical and mechanical specifications.

Substiute Parts

RN55C8062FBSL

Vishay DaleIn Stock: 1106RN55C8062FBSL Datasheet

Current PartRFQ

RN55C8062FB14

Vishay DaleIn Stock: 1853RN55C8062FB14 Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the RN55C8062FBSL are identified based on strict parametric equivalence. The substitution logic requires that alternative components maintain identical specifications across all critical electrical and mechanical parameters. The following parameters determine substitution eligibility:

• Resistance value: 80.6 kOhms (exact match required)
• Tolerance: ±1% (exact match required)
• Power rating: 0.125W / 1/8W (exact match required)
• Composition: Metal Film (exact match required)
• Package configuration: Axial through-hole (exact match required)
• Temperature coefficient: ±50ppm/°C (exact match required)
• Operating temperature range: -65°C to 175°C (exact match required)
• Physical dimensions: 0.090" Dia x 0.240" L (exact match required)
• Military specification compliance: MIL-R-10509/7 (exact match required)

Only components meeting all specified parameters are classified as parametric equivalents and direct substitutes.

Parameter Comparison

Engineering Selection Recommendations

Both the RN55C8062FBSL and RN55C8062FB14 are active, production-status components manufactured by Vishay Dale. Selection between these parts should be based on inventory availability and supply chain considerations. Both components carry identical electrical specifications, mechanical dimensions, and military compliance certifications. The RN55C8062FB14 currently maintains higher inventory levels (1824 pieces) compared to the RN55C8062FBSL (1025 pieces), which may influence procurement decisions for high-volume applications. Both parts are RoHS non-compliant and REACH-affected, requiring compliance verification for specific end-use applications. No technical performance differentiation exists between these components; selection is driven by sourcing and logistics factors.

Frequently Asked Questions (FAQ)

Q: Can RN55C8062FB14 be used as a direct replacement for RN55C8062FBSL?

A: Yes. Both components are parametric equivalents with identical resistance value (80.6 kOhms), tolerance (±1%), power rating (0.125W), composition (metal film), package type (axial), temperature coefficient (±50ppm/°C), operating temperature range (-65°C to 175°C), physical dimensions (0.090" Dia x 0.240" L), and military specification compliance (MIL-R-10509/7).

Q: Are there any physical differences between these part numbers?

A: No. Both components share identical physical dimensions of 0.090" diameter by 0.240" length (2.29mm x 6.10mm) and are packaged in axial through-hole configuration.

Q: Do both parts meet the same military specifications?

A: Yes. Both the RN55C8062FBSL and RN55C8062FB14 conform to MIL-R-10509/7 military specification and feature identical flame retardant coating, moisture resistance, and safety characteristics.

Q: What is the difference between these two part numbers?

A: The part numbers differ in their suffix designation (FBSL versus FB14), but this difference does not reflect any variation in electrical performance, mechanical specifications, or compliance certifications. Both are manufactured by Vishay Dale and are functionally identical.

Q: Are there any compliance considerations when substituting between these parts?

A: Both components carry identical RoHS non-compliant and REACH-affected status. Compliance verification for specific end-use applications must be performed independently of part number selection.

Q: Which part should be selected for new designs?

A: Either component is suitable for new designs. Selection should be based on current inventory availability and supply chain lead times. Both parts are active production items with identical technical specifications.