RN1302,LF Pre-Biased NPN Bipolar Transistor Equivalent & Substitute Parts

Part Overview

The RN1302,LF is an active pre-biased NPN bipolar transistor (BJT) manufactured by Toshiba Semiconductor and Storage. This surface mount component operates at 50 V collector-emitter breakdown voltage with a maximum collector current of 100 mA and is housed in an SC-70 (SOT-323) package. The device is designed for applications requiring integrated base bias resistors, eliminating the need for external biasing networks.

Substitute parts are necessary when the primary part experiences supply constraints, extended lead times, or when design requirements mandate alternative manufacturers or packaging configurations while maintaining electrical and mechanical compatibility.

Key Parameters

Parameter	Value	Unit
Transistor Type	NPN - Pre-Biased	—
Collector Current (Ic) Maximum	100	mA
Collector-Emitter Breakdown Voltage (Vceo)	50	V
Base Resistor (R1)	10	kOhms
Emitter-Base Resistor (R2)	10	kOhms
Transition Frequency (fT)	250	MHz
Power Dissipation Maximum	100	mW
Package Type	SC-70, SOT-323	—
Mounting Type	Surface Mount	—
RoHS Status	ROHS3 Compliant	—
Moisture Sensitivity Level	1 (Unlimited)	—

Substitute Part Grouping Explanation

Substitution of the RN1302,LF is determined by strict equivalence across the following critical parameters:

Mandatory Equivalence Criteria:

Transistor type: NPN pre-biased configuration
Collector-emitter breakdown voltage: 50 V
Maximum collector current: 100 mA
Base resistor value: 10 kOhms
Emitter-base resistor value: 10 kOhms
Transition frequency: 250 MHz minimum
Package type: SC-70 or SOT-323 surface mount
RoHS3 compliance
Moisture sensitivity level: 1 (Unlimited)

All substitute parts listed maintain these core electrical and mechanical specifications. Variations in DC current gain (hFE), saturation voltage (Vce), collector cutoff current (Iceo), and maximum power dissipation are permitted within the functional operating range of pre-biased BJT applications, provided the substitute part meets or exceeds the minimum performance thresholds of the primary part.

Parameter Comparison

Parameter	RN1302,LF (Toshiba)	DDTC114EUA-7-F (Diodes)	DTC114EUA-TP (MCC)	MUN5211T1G (onsemi)	PDTC114EU,115 (Nexperia)	PDTC114EU,135 (Nexperia)	SMUN5211T1G (onsemi)	SMUN5211T3G (onsemi)
Manufacturer	Toshiba	Diodes Inc.	MCC	onsemi	Nexperia	Nexperia	onsemi	onsemi
Transistor Type	NPN Pre-Biased	NPN Pre-Biased	NPN Pre-Biased	NPN Pre-Biased	NPN Pre-Biased	NPN Pre-Biased	NPN Pre-Biased	NPN Pre-Biased
Ic (Max)	100 mA	100 mA	100 mA	100 mA	100 mA	100 mA	100 mA	100 mA
Vceo (Max)	50 V	50 V	50 V	50 V	50 V	50 V	50 V	50 V
R1 (Base)	10 kOhms	10 kOhms	10 kOhms	10 kOhms	10 kOhms	10 kOhms	10 kOhms	10 kOhms
R2 (Emitter-Base)	10 kOhms	10 kOhms	10 kOhms	10 kOhms	10 kOhms	10 kOhms	10 kOhms	10 kOhms
fT (Transition Frequency)	250 MHz	250 MHz	250 MHz	202 MHz	—	—	202 MHz	202 MHz
Power (Max)	100 mW	200 mW	200 mW	202 mW	200 mW	200 mW	202 mW	202 mW
Package	SC-70, SOT-323	SC-70, SOT-323	SC-70, SOT-323	SC-70, SOT-323	SC-70, SOT-323	SC-70, SOT-323	SC-70, SOT-323	SC-70, SOT-323
RoHS Status	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant
MSL Rating	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)
Automotive Grade	—	—	—	—	Yes (AEC-Q101)	—	Yes (AEC-Q101)	Yes (AEC-Q101)

Engineering Selection Recommendations

All substitute parts listed are active products with ROHS3 compliance and MSL 1 rating, meeting the environmental and regulatory requirements of the RN1302,LF.

For general-purpose applications: DDTC114EUA-7-F (Diodes Incorporated), DTC114EUA-TP (Micro Commercial Co), MUN5211T1G (onsemi), PDTC114EU,115, and PDTC114EU,135 (Nexperia) are functionally equivalent. These parts provide equal or superior power dissipation ratings (200 mW versus 100 mW) and maintain all critical electrical parameters.

For automotive applications requiring AEC-Q101 qualification: SMUN5211T1G, SMUN5211T3G (onsemi automotive grade), and PDTC114EU,115 (Nexperia automotive grade) are specified. These parts carry formal automotive qualification and are suitable for safety-critical or temperature-sensitive automotive systems.

For applications with transition frequency sensitivity: The RN1302,LF specifies 250 MHz. MUN5211T1G, SMUN5211T1G, and SMUN5211T3G operate at 202 MHz, which is acceptable for most pre-biased BJT applications but should be verified if high-frequency switching performance is critical.

For maximum power dissipation headroom: DDTC114EUA-7-F, DTC114EUA-TP, PDTC114EU,115, PDTC114EU,135, MUN5211T1G, SMUN5211T1G, and SMUN5211T3G all provide 200–202 mW ratings, exceeding the RN1302,LF specification of 100 mW.

Frequently Asked Questions (FAQ)

Q: Can I substitute the RN1302,LF with any of the listed parts without circuit modification?

A: Yes. All listed substitute parts maintain identical base and emitter-base resistor values (10 kOhms each), collector-emitter breakdown voltage (50 V), maximum collector current (100 mA), and package type (SC-70/SOT-323). No circuit modifications are required for direct substitution.

Q: What is the difference between the onsemi MUN5211T1G and SMUN5211T1G variants?

A: Both parts are electrically identical with 50 V Vceo, 100 mA Ic, 10 kOhm bias resistors, and 202 mW power rating. The SMUN5211T1G and SMUN5211T3G carry AEC-Q101 automotive qualification, making them suitable for automotive applications. The MUN5211T1G is the standard industrial-grade equivalent.

Q: Are the Nexperia PDTC114EU,115 and PDTC114EU,135 parts interchangeable?

A: Yes. Both parts are electrically equivalent with identical electrical specifications. The primary difference is packaging: PDTC114EU,115 is supplied in Cut Tape (CT) & Digi-Reel format, while PDTC114EU,135 is supplied in Tape & Reel (TR) format. Selection depends on procurement and assembly requirements.

Q: Does the RN1302,LF require any specific handling or storage conditions?

A: The RN1302,LF has an MSL rating of 1 (Unlimited), indicating no moisture sensitivity restrictions. All substitute parts share this MSL 1 rating, requiring no special moisture-controlled storage or baking procedures prior to assembly.

Q: Can I use these parts in high-frequency switching applications above 250 MHz?

A: The RN1302,LF specifies a transition frequency (fT) of 250 MHz. Substitute parts MUN5211T1G, SMUN5211T1G, and SMUN5211T3G operate at 202 MHz. For applications requiring operation above 250 MHz, verify that the 202 MHz specification of the onsemi variants meets your circuit's frequency requirements. DDTC114EUA-7-F, DTC114EUA-TP, and Nexperia parts maintain the 250 MHz specification.

Q: What is the significance of the pre-biased configuration in these transistors?

A: Pre-biased transistors integrate internal base and emitter-base resistors (both 10 kOhms in this case) directly into the device. This eliminates the need for external biasing resistors, reducing component count, PCB area, and assembly complexity. All listed substitutes maintain this integrated bias resistor configuration.

Q: Are there inventory or lead time considerations when selecting a substitute?

A: Inventory levels vary by part and supplier. DDTC114EUA-7-F (Diodes) shows 146,766 units in stock, MUN5211T1G (onsemi) shows 180,100 units, and SMUN5211T1G (onsemi) shows 107,660 units. The RN1302,LF shows 3,634 units. Substitute selection may be influenced by current inventory availability and procurement timelines.

Q: Do all substitute parts meet RoHS3 compliance?

A: Yes. All substitute parts listed are ROHS3 compliant, matching the environmental compliance status of the RN1302,LF. All parts are also REACH unaffected and classified as EAR99 for export control purposes.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message