RMCS2010FT33R0 Equivalent & Substitute Parts

Part Overview

The RMCS2010FT33R0 is a 33 Ohm ±1% 0.75W chip resistor in 2010 (5025 Metric) package manufactured by Stackpole Electronics Inc. This thick film resistor features anti-sulfur construction and is designed for applications requiring precision resistance in compact form factors. The part maintains Active product status and is ROHS3 compliant. Substitute parts are identified when equivalent electrical specifications, mechanical dimensions, and compliance certifications align with the original component requirements.

Substiute Parts

RMCS2010FT33R0

Stackpole Electronics IncIn Stock: 984RMCS2010FT33R0 Datasheet

Current PartRFQ

RC2010FK-0733RL

YAGEOIn Stock: 6795RC2010FK-0733RL Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the RMCS2010FT33R0 is determined by strict alignment of the following parameters:

• Resistance value: 33 Ohms
• Tolerance: ±1%
• Power rating: 0.75W (3/4W)
• Package / Case: 2010 (5025 Metric)
• Composition: Thick Film
• Temperature Coefficient: ±100ppm/°C
• Operating Temperature Range: -55°C ~ 155°C
• Physical dimensions: 0.197" L x 0.098" W (5.00mm x 2.50mm)
• Height - Seated (Max): 0.026" (0.65mm)
• RoHS Status: ROHS3 Compliant
• Moisture Sensitivity Level: 1 (Unlimited)
• REACH Status: REACH Unaffected

The RC2010FK-0733RL from YAGEO meets all specified electrical and mechanical parameters, enabling direct substitution in applications where the RMCS2010FT33R0 is currently deployed.

Parameter Comparison

Engineering Selection Recommendations

Both the RMCS2010FT33R0 and RC2010FK-0733RL maintain Active product status and satisfy ROHS3 compliance requirements. The RC2010FK-0733RL is qualified as a direct substitute based on identical electrical specifications, mechanical dimensions, and regulatory certifications. Selection between these parts may be determined by availability, lead time, or supply chain requirements, as all technical parameters align within specified tolerances.

Frequently Asked Questions (FAQ)

Q: Can the RC2010FK-0733RL replace the RMCS2010FT33R0 in existing designs?

A: Yes. The RC2010FK-0733RL meets all electrical and mechanical specifications of the RMCS2010FT33R0, including resistance value, tolerance, power rating, package dimensions, and operating temperature range. No design modifications are required.

Q: Are there differences in physical packaging between these parts?

A: No. Both parts use the 2010 (5025 Metric) package with identical dimensions of 0.197" L x 0.098" W (5.00mm x 2.50mm) and maximum seated height of 0.026" (0.65mm). They are mechanically interchangeable.

Q: Do both parts meet the same compliance standards?

A: Yes. Both the RMCS2010FT33R0 and RC2010FK-0733RL are ROHS3 compliant, REACH unaffected, and carry MSL 1 (Unlimited) moisture sensitivity ratings.

Q: What is the temperature coefficient specification for these resistors?

A: Both parts specify a temperature coefficient of ±100ppm/°C and operate across the -55°C ~ 155°C temperature range.

Q: Are these parts available in tape and reel packaging?

A: Yes. Both the RMCS2010FT33R0 and RC2010FK-0733RL are supplied in Tape & Reel (TR) packaging suitable for automated assembly processes.