RMCS2010FT10R0 Equivalent & Substitute Parts

Part Overview

The RMCS2010FT10R0 is a 10 Ohm ±1% 0.75W chip resistor in 2010 (5025 Metric) package manufactured by Stackpole Electronics Inc. This thick film resistor features anti-sulfur construction and operates across -55°C to 155°C. The part is currently active in production with 916 units in stock. Equivalent and substitute parts are identified for applications requiring alternative sourcing, inventory management, or specific compliance requirements.

Substiute Parts

RMCS2010FT10R0

Stackpole Electronics IncIn Stock: 1012RMCS2010FT10R0 Datasheet

Current PartRFQ

RMCF2010FT10R0

Stackpole Electronics IncIn Stock: 172324RMCF2010FT10R0 Datasheet

MFR RecommendedRFQ

CRCW201010R0FKEF

Vishay DaleIn Stock: 4406CRCW201010R0FKEF Datasheet

MFR RecommendedRFQ

CRCW201010R0FKTF

Vishay DaleIn Stock: 11233CRCW201010R0FKTF Datasheet

MFR RecommendedRFQ

ERJ-12SF10R0U

Panasonic Electronic ComponentsIn Stock: 13828ERJ-12SF10R0U Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the RMCS2010FT10R0 is determined by the following parameters:

• Resistance value: 10 Ohms
• Tolerance: ±1%
• Power rating: 0.75W (3/4W)
• Package: 2010 (5025 Metric)
• Composition: Thick Film
• Temperature coefficient: ±100ppm/°C
• Operating temperature range: -55°C ~ 155°C
• Number of terminations: 2
• Moisture sensitivity level: 1 (Unlimited)

All identified substitute parts match these core electrical and mechanical parameters. Variations in features (such as automotive AEC-Q200 certification or anti-sulfur construction) and compliance status (RoHS, REACH) do not affect functional substitutability but may influence selection based on application requirements.

Parameter Comparison

Engineering Selection Recommendations

RMCF2010FT10R0 (Stackpole Electronics Inc) is the primary substitute for new designs. This part maintains the same manufacturer lineage as the original RMCS2010FT10R0, shares identical electrical specifications, and carries active product status with ROHS3 compliance. The automotive AEC-Q200 certification provides additional qualification for demanding applications.

CRCW201010R0FKEF (Vishay Dale) is a qualified alternative with active product status and ROHS3 compliance. This part is suitable for applications requiring multi-source qualification or Vishay component standardization.

CRCW201010R0FKTF (Vishay Dale) is functionally equivalent but carries RoHS non-compliance and REACH-affected status. Selection of this part requires explicit compliance verification against application requirements.

ERJ-12SF10R0U (Panasonic Electronic Components) is marked "Not For New Designs" and should be used only for legacy system maintenance or repair applications where original part continuity is required.

Frequently Asked Questions (FAQ)

Q: Can RMCF2010FT10R0 directly replace RMCS2010FT10R0?

A: Yes. Both parts share identical electrical parameters (10 Ω, ±1%, 0.75W), operate across the same temperature range (-55°C ~ 155°C), and use the 2010 package. The primary difference is the automotive AEC-Q200 certification on RMCF2010FT10R0, which does not prevent substitution.

Q: What is the difference between CRCW201010R0FKEF and CRCW201010R0FKTF?

A: Both parts are electrically and mechanically identical. The distinction lies in compliance status: CRCW201010R0FKEF is ROHS3 compliant and REACH unaffected, while CRCW201010R0FKTF is RoHS non-compliant and REACH affected. Selection depends on application compliance requirements.

Q: Why is ERJ-12SF10R0U marked "Not For New Designs"?

A: This designation indicates the part is in mature or end-of-life status. It remains available for existing applications but should not be selected for new product development. Use RMCF2010FT10R0 or CRCW201010R0FKEF for new designs.

Q: Are all substitute parts available in the same packaging format?

A: Yes. All listed parts are supplied in Tape & Reel (TR) packaging and use the 2010 (5025 Metric) package case, ensuring compatibility with standard pick-and-place assembly equipment.

Q: What is the significance of the anti-sulfur feature on RMCS2010FT10R0?

A: The anti-sulfur construction on RMCS2010FT10R0 provides enhanced corrosion resistance in sulfur-rich environments. Substitute parts with automotive AEC-Q200 certification (RMCF2010FT10R0, CRCW201010R0FKEF, CRCW201010R0FKTF, ERJ-12SF10R0U) meet equivalent environmental durability standards through different qualification pathways.