RMCS1206FT20R0 Equivalent & Substitute Parts

Part Overview

The RMCS1206FT20R0 is a 20 Ohm ±1% 0.25W thick film chip resistor in 1206 (3216 Metric) package manufactured by Stackpole Electronics Inc. This anti-sulfur resistor operates across -55°C to 155°C and is ROHS3 compliant with unlimited moisture sensitivity rating. Substitute parts are necessary to address inventory availability, extended lead times, or specific application requirements such as automotive qualification or enhanced power ratings.

Key Parameters

Parameter	Value
Resistance	20 Ohms
Tolerance	±1%
Power Rating	0.25W (1/4W)
Package	1206 (3216 Metric)
Composition	Thick Film
Temperature Coefficient	±100ppm/°C
Operating Temperature Range	-55°C to 155°C
Terminations	2
RoHS Status	ROHS3 Compliant
Moisture Sensitivity Level	1 (Unlimited)

Substitute Part Grouping Explanation

Substitution eligibility is determined by strict equivalence across the following parameters:

Resistance value: 20 Ohms
Tolerance: ±1%
Package: 1206 (3216 Metric)
Composition: Thick Film
Temperature Coefficient: ±100ppm/°C
Operating Temperature Range: -55°C to 155°C
Terminations: 2
Moisture Sensitivity Level: 1 (Unlimited)

Parts are grouped into two categories based on power rating:

Category A (0.25W / 1/4W): Direct electrical and mechanical equivalents with identical power dissipation capability. These parts maintain full compatibility with the original design specification.

Category B (Higher Power Ratings): Parts with 0.5W or 0.75W ratings that exceed the original specification. These provide enhanced thermal performance and pulse withstanding capability while maintaining all other electrical parameters. Selection depends on circuit design margin requirements.

Parameter Comparison

Manufacturer Part Number	Manufacturer	Resistance	Tolerance	Power (W)	Temp Coeff	Operating Temp	Package	RoHS Status	Product Status	Features
RMCS1206FT20R0	Stackpole Electronics Inc	20 Ω	±1%	0.25	±100ppm/°C	-55°C ~ 155°C	1206	ROHS3	Active	Anti-Sulfur
AC1206FR-0720RL	YAGEO	20 Ω	±1%	0.25	±100ppm/°C	-55°C ~ 155°C	1206	ROHS3	Active	Automotive AEC-Q200, Moisture Resistant
CR1206-FX-20R0ELF	Bourns Inc.	20 Ω	±1%	0.25	±100ppm/°C	-55°C ~ 155°C	1206	ROHS3	Active	Moisture Resistant
CRCW120620R0FKEA	Vishay Dale	20 Ω	±1%	0.25	±100ppm/°C	-55°C ~ 155°C	1206	ROHS3	Active	Automotive AEC-Q200
CRCW120620R0FKEAHP	Vishay Dale	20 Ω	±1%	0.75	±100ppm/°C	-55°C ~ 155°C	1206	ROHS3	Active	Automotive AEC-Q200, Pulse Withstanding
CRCW120620R0FKTA	Vishay Dale	20 Ω	±1%	0.25	±100ppm/°C	-55°C ~ 155°C	1206	RoHS Non-Compliant	Active	Automotive AEC-Q200
ERJ-8ENF20R0V	Panasonic Electronic Components	20 Ω	±1%	0.25	±100ppm/°C	-55°C ~ 155°C	1206	ROHS3	Not For New Designs	Automotive AEC-Q200
ESR18EZPF20R0	Rohm Semiconductor	20 Ω	±1%	0.5	±100ppm/°C	-55°C ~ 155°C	1206	ROHS3	Active	Automotive AEC-Q200, Pulse Withstanding
RC1206FR-0720RL	YAGEO	20 Ω	±1%	0.25	±100ppm/°C	-55°C ~ 155°C	1206	ROHS3	Active	Moisture Resistant

Engineering Selection Recommendations

Primary Substitutes (Full Equivalence):

AC1206FR-0720RL, CR1206-FX-20R0ELF, CRCW120620R0FKEA, and RC1206FR-0720RL are direct functional equivalents with identical electrical specifications and 0.25W power rating. All are ROHS3 compliant and active products. AC1206FR-0720RL, CRCW120620R0FKEA, and ESR18EZPF20R0 carry automotive AEC-Q200 qualification, suitable for applications requiring automotive-grade reliability.

Enhanced Power Rating Alternatives:

CRCW120620R0FKEAHP (0.75W) and ESR18EZPF20R0 (0.5W) provide increased power dissipation capability with pulse withstanding features. These are appropriate for designs requiring thermal margin beyond the original 0.25W specification while maintaining all other electrical parameters.

Restricted Substitutes:

CRCW120620R0FKTA is RoHS non-compliant and REACH affected. Use only in applications where regulatory compliance is not required.

ERJ-8ENF20R0V carries "Not For New Designs" status. Avoid in new product development; use only for legacy system maintenance or repair.

Frequently Asked Questions (FAQ)

Q: Can I substitute any of these parts directly into the RMCS1206FT20R0 circuit?

A: Parts with identical 0.25W power rating and ROHS3 compliance (AC1206FR-0720RL, CR1206-FX-20R0ELF, CRCW120620R0FKEA, RC1206FR-0720RL) are direct substitutes. Higher power-rated parts (0.5W or 0.75W) are electrically compatible but physically larger and may require PCB layout verification.

Q: What is the difference between the automotive-qualified parts and standard parts?

A: AC1206FR-0720RL, CRCW120620R0FKEA, CRCW120620R0FKEAHP, and ERJ-8ENF20R0V carry AEC-Q200 automotive qualification, indicating compliance with automotive reliability and environmental stress testing standards. Standard parts (CR1206-FX-20R0ELF, RC1206FR-0720RL) meet general industrial requirements.

Q: Why should I avoid CRCW120620R0FKTA?

A: CRCW120620R0FKTA is RoHS non-compliant and REACH affected. Use only in applications where regulatory compliance is not a requirement.

Q: Is ERJ-8ENF20R0V still available for use?

A: ERJ-8ENF20R0V is marked "Not For New Designs," indicating the manufacturer recommends against its use in new product development. It remains available for legacy system support and repair applications only.

Q: What packaging formats are available?

A: RMCS1206FT20R0 and most substitutes are supplied in Tape & Reel (TR) format for automated assembly. RC1206FR-0720RL is available in Cut Tape (CT) & Digi-Reel format for lower-volume applications.

Q: Can I use a higher power-rated part in place of the 0.25W original?

A: Yes. CRCW120620R0FKEAHP (0.75W) and ESR18EZPF20R0 (0.5W) maintain all electrical specifications while providing enhanced thermal performance. Physical dimensions may vary slightly; verify PCB footprint compatibility before assembly.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message