RMCS0805FT107K Equivalent & Substitute Parts

Part Overview

The RMCS0805FT107K is a 107 kOhms ±1% 0.125W thick film chip resistor in 0805 (2012 Metric) package manufactured by Stackpole Electronics Inc. This component is actively produced and widely used in general-purpose electronic applications. Substitute parts are identified based on matching electrical specifications, package dimensions, and mechanical compatibility to ensure direct board-level replacement capability.

Substiute Parts

RMCS0805FT107K

Stackpole Electronics IncIn Stock: 819RMCS0805FT107K Datasheet

Current PartRFQ

RMCF0805FT107K

Stackpole Electronics IncIn Stock: 4220RMCF0805FT107K Datasheet

MFR RecommendedRFQ

CRCW0805107KFKEA

Vishay DaleIn Stock: 19145CRCW0805107KFKEA Datasheet

MFR RecommendedRFQ

ERJ-6ENF1073V

Panasonic Electronic ComponentsIn Stock: 109708ERJ-6ENF1073V Datasheet

MFR RecommendedRFQ

RC0805FR-07107KL

YAGEOIn Stock: 43962RC0805FR-07107KL Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the RMCS0805FT107K are qualified based on the following criteria:

• Resistance value: 107 kOhms
• Tolerance: ±1%
• Power rating: 0.125W (1/8W)
• Package: 0805 (2012 Metric)
• Composition: Thick Film
• Temperature coefficient: ±100ppm/°C
• Operating temperature range: -55°C ~ 155°C
• RoHS3 compliance
• MSL rating: 1 (Unlimited)

All identified substitutes meet these core electrical and mechanical parameters, enabling direct replacement in PCB designs without circuit modification.

Parameter Comparison

Engineering Selection Recommendations

All substitute parts listed are active products with ROHS3 compliance and MSL rating 1. Selection among substitutes should be based on:

• Availability and lead time requirements
• Height clearance constraints: CRCW0805107KFKEA (0.50mm) offers the lowest profile; ERJ-6ENF1073V (0.70mm) the highest
• Packaging format preference: Most are supplied in Tape & Reel; CRCW0805107KFKEA is available in Cut Tape & Digi-Reel
• Feature requirements: RMCF0805FT107K and CRCW0805107KFKEA include AEC-Q200 automotive qualification; RC0805FR-07107KL includes moisture-resistant features

Frequently Asked Questions (FAQ)

Q: Can RMCF0805FT107K replace RMCS0805FT107K directly?

A: Yes. Both parts share identical electrical specifications (107 kOhms ±1%, 0.125W, ±100ppm/°C, -55°C ~ 155°C). The primary difference is RMCF includes AEC-Q200 automotive qualification. Height difference is 0.05mm (0.65mm vs 0.60mm), which is within standard PCB design tolerances for 0805 packages.

Q: What is the significance of AEC-Q200 qualification on RMCF0805FT107K and CRCW0805107KFKEA?

A: AEC-Q200 is an automotive industry standard qualification. These parts are suitable for automotive and high-reliability applications. Non-automotive qualified parts (RMCS0805FT107K, RC0805FR-07107KL, ERJ-6ENF1073V) are equally suitable for general industrial and consumer applications.

Q: Are there height restrictions when selecting a substitute?

A: Height variations range from 0.50mm to 0.70mm across substitutes. For standard PCB designs, this variation is acceptable. For applications with tight vertical clearance constraints, CRCW0805107KFKEA (0.50mm) is the lowest-profile option.

Q: Do all substitutes have the same moisture sensitivity level?

A: Yes. All listed parts have MSL rating 1 (Unlimited), indicating no moisture sensitivity restrictions during storage or handling.

Q: Is packaging format interchangeable between substitutes?

A: All substitutes use 0805 (2012 Metric) package with identical footprint dimensions (2.00mm L × 1.25mm W). Packaging format (Tape & Reel vs Cut Tape) affects supply and handling only, not PCB compatibility.