RMCP2512FT200R Equivalent & Substitute Parts

Part Overview

The RMCP2512FT200R is a 200 Ohms ±1% 2W chip resistor in 2512 (6432 Metric) package manufactured by Stackpole Electronics Inc. This thick film resistor is designed for automotive applications and carries AEC-Q200 qualification. The part is currently active in production with 1110 pieces available in stock. Equivalent and substitute parts may be required due to supply chain constraints, inventory availability, or specific application requirements where alternative feature sets are acceptable.

Substiute Parts

RMCP2512FT200R

Stackpole Electronics IncIn Stock: 1181RMCP2512FT200R Datasheet

Current PartRFQ

RHC2512FT200R

Stackpole Electronics IncIn Stock: 4933RHC2512FT200R Datasheet

MFR RecommendedRFQ

3521200RFT

TE Connectivity Passive ProductIn Stock: 21163521200RFT Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the RMCP2512FT200R is determined by strict equivalence across the following critical parameters: resistance value (200 Ohms), tolerance (±1%), power rating (2W), package type (2512 / 6432 Metric), composition (thick film), temperature coefficient (±100ppm/°C), operating temperature range (-55°C ~ 155°C), and termination count (2). All identified substitute parts meet these core electrical and mechanical specifications.

The substitute parts are grouped into two categories based on feature differentiation:

MFR Recommended Substitute: RHC2512FT200R maintains identical electrical specifications but features moisture-resistant construction instead of automotive AEC-Q200 qualification. This part is suitable for applications where moisture resistance is prioritized over automotive certification.

Direct Manufacturer Substitute: 3521200RFT, manufactured by TE Connectivity Passive Product, provides equivalent electrical performance with automotive AEC-Q200 qualification matching the original part. This part is available in Cut Tape (CT) & Digi-Reel® packaging.

Parameter Comparison

Engineering Selection Recommendations

All three parts are active products with ROHS3 compliance and MSL 1 rating, confirming suitability for standard manufacturing and storage conditions.

RMCP2512FT200R is the primary specification. Select this part when automotive AEC-Q200 qualification is a mandatory requirement and Tape & Reel packaging is preferred.

RHC2512FT200R is the MFR recommended substitute from Stackpole Electronics Inc. This part maintains identical electrical specifications and is suitable for applications where moisture-resistant construction is required instead of automotive certification. Inventory availability is higher at 4898 pieces.

3521200RFT is the direct manufacturer substitute from TE Connectivity Passive Product. This part provides equivalent electrical performance with automotive AEC-Q200 qualification matching the original specification. It is available in Cut Tape (CT) & Digi-Reel® packaging format. The seated height is marginally lower at 0.026" compared to 0.030" for the original part, which may be advantageous in space-constrained applications.

Frequently Asked Questions (FAQ)

Q: Can RHC2512FT200R be used as a direct replacement for RMCP2512FT200R?

A: RHC2512FT200R meets all core electrical and mechanical specifications. The primary difference is the feature set: RHC2512FT200R provides moisture-resistant construction while RMCP2512FT200R carries automotive AEC-Q200 qualification. Selection depends on whether automotive certification or moisture resistance is the critical requirement for your application.

Q: What are the physical differences between these parts?

A: All three parts share identical footprint dimensions of 0.248" L x 0.126" W (6.30mm x 3.20mm). Seated height varies slightly: RMCP2512FT200R at 0.030" (0.75mm), RHC2512FT200R at 0.028" (0.70mm), and 3521200RFT at 0.026" (0.65mm). These minor height variations are within typical PCB assembly tolerances.

Q: Does packaging format affect electrical performance?

A: No. Packaging format (Tape & Reel versus Cut Tape & Digi-Reel®) affects handling and assembly logistics only. Electrical specifications remain identical across all three parts.

Q: Are all parts suitable for automotive applications?

A: RMCP2512FT200R and 3521200RFT both carry AEC-Q200 qualification for automotive use. RHC2512FT200R does not have automotive certification but is suitable for non-automotive applications requiring moisture resistance.

Q: What is the significance of MSL 1 rating?

A: MSL 1 (Moisture Sensitivity Level 1) indicates unlimited shelf life without moisture bake requirements. All three parts have this rating, confirming they can be stored and handled under standard conditions without special moisture control procedures.