RMCP2010FT360R Equivalent & Substitute Parts

Part Overview

The RMCP2010FT360R is a 360 Ohm ±1% 1W chip resistor manufactured by Stackpole Electronics Inc in the 2010 (5025 Metric) package format. This thick film resistor is designed for automotive applications and meets AEC-Q200 qualification standards. The component is currently in active production status with 743 units available in stock. Substitute parts are identified when equivalent electrical specifications, mechanical dimensions, and automotive compliance ratings are maintained across alternative manufacturers.

Substiute Parts

RMCP2010FT360R

Stackpole Electronics IncIn Stock: 837RMCP2010FT360R Datasheet

Current PartRFQ

CRCW2010360RFKEFHP

Vishay DaleIn Stock: 8894CRCW2010360RFKEFHP Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the RMCP2010FT360R is determined by strict equivalence across the following parameters:

• Resistance value: 360 Ohms
• Tolerance: ±1%
• Power rating: 1W
• Package format: 2010 (5025 Metric)
• Composition: Thick Film
• Temperature coefficient: ±100ppm/°C
• Operating temperature range: -55°C ~ 155°C
• Automotive compliance: AEC-Q200
• RoHS compliance: ROHS3 Compliant
• Moisture sensitivity: MSL 1

The CRCW2010360RFKEFHP from Vishay Dale meets all these criteria and qualifies as a direct substitute. Both components share identical electrical performance specifications, mechanical dimensions, and regulatory compliance certifications required for automotive applications.

Parameter Comparison

Engineering Selection Recommendations

Both the RMCP2010FT360R and CRCW2010360RFKEFHP are active production components with full AEC-Q200 automotive qualification and ROHS3 compliance. Selection between these parts may be based on availability, supply chain considerations, or existing design documentation requirements. The CRCW2010360RFKEFHP includes pulse withstanding capability as an additional feature, though this does not alter the core substitution equivalence. Both components are suitable for direct replacement in automotive circuit applications requiring 360 Ohm 1W resistors in the 2010 package format.

Frequently Asked Questions (FAQ)

Q: Can the CRCW2010360RFKEFHP replace the RMCP2010FT360R in automotive applications?

A: Yes. Both components meet identical electrical specifications (360 Ohms ±1%, 1W), operate across the same temperature range (-55°C ~ 155°C), share the same 2010 package dimensions, and carry AEC-Q200 automotive qualification. Direct substitution is valid.

Q: Are the physical dimensions identical between these two parts?

A: Yes. Both components measure 0.197" L x 0.098" W (5.00mm x 2.50mm) with a maximum seated height of 0.028" (0.70mm). PCB footprints and assembly processes remain unchanged.

Q: What does the pulse withstanding feature on the CRCW2010360RFKEFHP indicate?

A: Pulse withstanding capability indicates enhanced performance under transient overvoltage conditions. This is an additional feature of the Vishay Dale component that does not affect basic substitution compatibility.

Q: Are both parts RoHS compliant?

A: Yes. Both the RMCP2010FT360R and CRCW2010360RFKEFHP are ROHS3 compliant with MSL 1 (Unlimited) moisture sensitivity rating.

Q: What is the tolerance specification for these resistors?

A: Both components carry ±1% tolerance with a temperature coefficient of ±100ppm/°C, ensuring stable performance across the -55°C ~ 155°C operating range.