RMCF2010FT470K Equivalent & Substitute Parts

Part Overview

The RMCF2010FT470K is a 470 kOhms ±1% 0.75W chip resistor in 2010 (5025 Metric) package manufactured by Stackpole Electronics Inc. This thick film resistor is designed for automotive applications and meets AEC-Q200 qualification standards. The part is currently active in production with 784 pieces available in inventory. Equivalent and substitute parts are identified when identical electrical specifications and mechanical compatibility are maintained across different manufacturers while preserving automotive-grade reliability requirements.

Substiute Parts

RMCF2010FT470K

Stackpole Electronics IncIn Stock: 847RMCF2010FT470K Datasheet

Current PartRFQ

CRCW2010470KFKEF

Vishay DaleIn Stock: 7792CRCW2010470KFKEF Datasheet

DirectRFQ

RC2010FK-07470KL

YAGEOIn Stock: 12439RC2010FK-07470KL Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the RMCF2010FT470K are qualified based on the following criteria:

• Identical resistance value: 470 kOhms
• Matching tolerance: ±1%
• Equivalent power rating: 0.75W
• Same package designation: 2010 (5025 Metric)
• Thick film composition
• Temperature coefficient: ±100ppm/°C
• Operating temperature range: -55°C ~ 155°C
• RoHS3 compliance
• MSL rating: 1 (Unlimited)

Two substitute parts meet these requirements: CRCW2010470KFKEF (Vishay Dale) and RC2010FK-07470KL (YAGEO). Both maintain electrical and mechanical compatibility with the original part specification.

Parameter Comparison

Engineering Selection Recommendations

CRCW2010470KFKEF (Vishay Dale) is a direct equivalent with full AEC-Q200 automotive qualification matching the original RMCF2010FT470K specification. This part maintains identical electrical parameters, package dimensions, and automotive-grade reliability certifications.

RC2010FK-07470KL (YAGEO) provides functional equivalence with identical electrical specifications and RoHS3 compliance. This part features moisture-resistant thick film composition and operates within the same temperature range. The seated height is 0.002" (0.05mm) lower than the original specification, which remains within acceptable PCB assembly tolerances for 2010 package components. AEC-Q200 automotive qualification is not specified for this part.

Both substitute parts are active products with established inventory availability and maintain full RoHS3 and REACH compliance status.

Frequently Asked Questions (FAQ)

Q: Can CRCW2010470KFKEF be used as a direct replacement for RMCF2010FT470K?

A: Yes. CRCW2010470KFKEF meets all electrical and mechanical specifications of the original part, including identical resistance, tolerance, power rating, package dimensions, temperature coefficient, and AEC-Q200 automotive qualification.

Q: What is the difference between RMCF2010FT470K and RC2010FK-07470KL?

A: Both parts share identical electrical specifications (470 kOhms ±1%, 0.75W, ±100ppm/°C, -55°C ~ 155°C). RC2010FK-07470KL features moisture-resistant thick film composition and has a maximum seated height of 0.026" (0.65mm) compared to 0.028" (0.70mm) for the original part. AEC-Q200 automotive qualification is not specified for the YAGEO part.

Q: Are all substitute parts RoHS3 compliant?

A: Yes. CRCW2010470KFKEF and RC2010FK-07470KL are both ROHS3 compliant and REACH unaffected, matching the environmental compliance status of the original RMCF2010FT470K.

Q: Can these parts be used interchangeably in automotive applications?

A: CRCW2010470KFKEF maintains full AEC-Q200 qualification and is suitable for automotive applications. RC2010FK-07470KL meets electrical specifications but does not carry specified AEC-Q200 certification; application suitability depends on specific automotive qualification requirements.

Q: What is the MSL rating for these parts?

A: All three parts carry MSL rating 1 (Unlimited), indicating no moisture sensitivity restrictions during storage or handling.

Q: Are the package dimensions identical across all three parts?

A: Length and width are identical at 0.197" L x 0.098" W (5.00mm x 2.50mm). Maximum seated height for RMCF2010FT470K and CRCW2010470KFKEF is 0.028" (0.70mm), while RC2010FK-07470KL is 0.026" (0.65mm). This 0.002" difference is within standard PCB assembly tolerances for 2010 package components.