RMCF2010FT360R Equivalent & Substitute Parts

Part Overview

The RMCF2010FT360R is a 360 Ohm ±1% thick film chip resistor rated at 0.75W in a 2010 (5025 Metric) package form factor. Manufactured by Stackpole Electronics Inc, this component is designed for automotive applications and carries AEC-Q200 qualification. The part is currently in active production status with 807 units available in inventory. Substitute parts are identified when equivalent electrical specifications, mechanical dimensions, and compliance certifications align with the original component requirements.

Substiute Parts

RMCF2010FT360R

Stackpole Electronics IncIn Stock: 833RMCF2010FT360R Datasheet

Current PartRFQ

RC2010FK-07360RL

YAGEOIn Stock: 8655RC2010FK-07360RL Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the RMCF2010FT360R is determined by strict alignment of the following parameters:

• Resistance value: 360 Ohms
• Tolerance: ±1%
• Power rating: 0.75W minimum
• Package form factor: 2010 (5025 Metric)
• Composition: Thick film construction
• Temperature coefficient: ±100ppm/°C
• Operating temperature range: -55°C to 155°C minimum
• RoHS3 compliance
• MSL rating: 1 (Unlimited)

The RC2010FK-07360RL from YAGEO meets all specified electrical and mechanical parameters and qualifies as a direct substitute.

Parameter Comparison

Engineering Selection Recommendations

Both the RMCF2010FT360R and RC2010FK-07360RL are active production components with ROHS3 compliance and unlimited moisture sensitivity ratings. The RMCF2010FT360R carries AEC-Q200 automotive qualification, while the RC2010FK-07360RL is specified with moisture-resistant thick film construction. Selection between these parts should be based on specific application requirements regarding automotive qualification status and feature requirements. Both components meet the core electrical and mechanical specifications for 360 Ohm ±1% 0.75W 2010 package applications.

Frequently Asked Questions (FAQ)

Q: Can RC2010FK-07360RL replace RMCF2010FT360R in automotive applications?

A: The RC2010FK-07360RL matches all electrical and mechanical parameters. However, the RMCF2010FT360R carries explicit AEC-Q200 automotive qualification. Application requirements should determine whether AEC-Q200 certification is mandatory.

Q: Are the physical dimensions identical between these parts?

A: Both parts use the 2010 (5025 Metric) package with identical length and width dimensions of 0.197" x 0.098" (5.00mm x 2.50mm). The seated height differs slightly: RMCF2010FT360R at 0.028" (0.70mm) versus RC2010FK-07360RL at 0.026" (0.65mm). This 0.002" difference is within typical PCB assembly tolerances.

Q: What is the significance of the moisture-resistant feature on the YAGEO part?

A: Both parts carry MSL rating 1 (Unlimited), indicating unlimited shelf life under standard conditions. The moisture-resistant designation on the RC2010FK-07360RL describes the thick film construction method but does not alter the MSL classification.

Q: Are both parts available in Tape & Reel packaging?

A: Yes, both RMCF2010FT360R and RC2010FK-07360RL are supplied in Tape & Reel (TR) packaging suitable for automated assembly processes.

Q: Do these parts have identical temperature performance?

A: Both parts specify ±100ppm/°C temperature coefficient and operate across the -55°C to 155°C range, providing identical thermal performance characteristics.