RMCF1206FT698R Equivalent & Substitute Parts

Part Overview

The RMCF1206FT698R is a 698 Ohm ±1% 0.25W thick film chip resistor in 1206 (3216 Metric) package manufactured by Stackpole Electronics Inc. This component is rated for automotive applications under AEC-Q200 standard with an operating temperature range of -55°C to 155°C. The part is currently active in production with 4711 units in stock.

Substitute parts are necessary when the primary manufacturer experiences supply constraints, when design requirements mandate alternative certifications or features, or when procurement strategies require multiple qualified sources for production continuity.

Substiute Parts

RMCF1206FT698R

Stackpole Electronics IncIn Stock: 4748RMCF1206FT698R Datasheet

Current PartRFQ

CR1206-FX-6980ELF

Bourns Inc.In Stock: 69307CR1206-FX-6980ELF Datasheet

DirectRFQ

CRCW1206698RFKEA

Vishay DaleIn Stock: 15890CRCW1206698RFKEA Datasheet

DirectRFQ

ERJ-8ENF6980V

Panasonic Electronic ComponentsIn Stock: 76320ERJ-8ENF6980V Datasheet

DirectRFQ

MCR18ERTF6980

Rohm SemiconductorIn Stock: 2393MCR18ERTF6980 Datasheet

DirectRFQ

RC1206FR-07698RL

YAGEOIn Stock: 53604RC1206FR-07698RL Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the RMCF1206FT698R is determined by strict equivalence across the following parameters:

• Resistance value: 698 Ohms
• Tolerance: ±1%
• Power rating: 0.25W (1/4W)
• Package designation: 1206 (3216 Metric)
• Composition: Thick Film
• Temperature coefficient: ±100ppm/°C
• Operating temperature range: -55°C to 155°C
• RoHS compliance: ROHS3 Compliant
• Moisture sensitivity level: 1 (Unlimited)

All qualified substitute parts listed maintain these electrical and mechanical specifications. Variations in physical dimensions (length, width, height) and packaging format (Tape & Reel vs. Cut Tape) do not affect functional equivalence but may impact assembly and procurement workflows.

Parameter Comparison

Engineering Selection Recommendations

For active production and new design implementations, CR1206-FX-6980ELF (Bourns), CRCW1206698RFKEA (Vishay Dale), and RC1206FR-07698RL (YAGEO) are qualified substitutes with Active product status and full ROHS3 compliance.

The RMCF1206FT698R (Stackpole) and CRCW1206698RFKEA (Vishay Dale) both carry AEC-Q200 automotive qualification, making them suitable for applications requiring automotive-grade components.

CR1206-FX-6980ELF (Bourns) and RC1206FR-07698RL (YAGEO) feature moisture-resistant thick film construction, providing enhanced environmental protection in high-humidity or corrosive environments.

ERJ-8ENF6980V (Panasonic) is marked "Not For New Designs" and should not be selected for new product development, though existing inventory may be used for legacy system maintenance.

MCR18ERTF6980 (Rohm Semiconductor) is discontinued at DiGi Electronics and represents a legacy option with limited availability.

Frequently Asked Questions (FAQ)

Q: Can I substitute RMCF1206FT698R with any of these parts without circuit redesign?

A: Yes. All listed substitute parts maintain identical electrical specifications (698 Ω ±1%, 0.25W, ±100ppm/°C, -55°C to 155°C operating range) and package designation (1206). No circuit redesign is required for functional equivalence.

Q: What is the difference between Tape & Reel and Cut Tape packaging?

A: Tape & Reel packaging is optimized for automated assembly lines with continuous component feeding. Cut Tape packaging is supplied in shorter strips and is suitable for manual assembly or lower-volume production. Both formats contain identical components; the difference is in procurement and assembly workflow.

Q: Why is ERJ-8ENF6980V marked "Not For New Designs"?

A: This designation indicates the manufacturer has discontinued active development and support for this part number. While existing inventory may be available, new product designs should select from parts with Active status to ensure long-term supply chain stability and manufacturer support.

Q: Are all substitute parts AEC-Q200 qualified?

A: No. Only RMCF1206FT698R (Stackpole) and CRCW1206698RFKEA (Vishay Dale) carry explicit AEC-Q200 automotive qualification. Applications requiring automotive-grade components must select from these two options.

Q: What does Moisture Sensitivity Level 1 mean?

A: MSL 1 indicates unlimited shelf life without moisture-related degradation. All listed parts carry MSL 1 rating, meaning they can be stored indefinitely without special moisture-control packaging or baking procedures prior to assembly.

Q: Can I use these parts interchangeably in existing PCB designs?

A: Yes, provided the PCB footprint is designed for standard 1206 (3216 Metric) package dimensions. Minor variations in component height (0.024" to 0.030" seated height) do not affect PCB assembly compatibility.