RMCF0805FG10K7 Equivalent & Substitute Parts

Part Overview

The RMCF0805FG10K7 is a 10.7 kOhms ±1% thick film chip resistor in 0805 (2012 Metric) package rated for 0.125W (1/8W) power dissipation. Manufactured by Stackpole Electronics Inc, this component meets AEC-Q200 automotive qualification standards and operates across -55°C to 155°C. The part is active in production with ROHS3 compliance and unlimited moisture sensitivity rating (MSL 1). Equivalent and substitute parts are identified to support procurement flexibility, supply chain continuity, and design requirements across multiple manufacturing sources.

Substiute Parts

RMCF0805FG10K7

Stackpole Electronics IncIn Stock: 870RMCF0805FG10K7 Datasheet

Current PartRFQ

RMCF0805FT10K7

Stackpole Electronics IncIn Stock: 85100RMCF0805FT10K7 Datasheet

DirectRFQ

CRCW080510K7FKEA

Vishay DaleIn Stock: 43971CRCW080510K7FKEA Datasheet

DirectRFQ

ERJ-6ENF1072V

Panasonic Electronic ComponentsIn Stock: 22340ERJ-6ENF1072V Datasheet

DirectRFQ

RC0805FR-0710K7L

YAGEOIn Stock: 40539RC0805FR-0710K7L Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the RMCF0805FG10K7 is determined by strict equivalence across the following parameters:

• Resistance value: 10.7 kOhms
• Tolerance: ±1%
• Power rating: 0.125W (1/8W)
• Package: 0805 (2012 Metric)
• Composition: Thick Film
• Temperature coefficient: ±100ppm/°C
• Operating temperature range: -55°C ~ 155°C
• Termination count: 2
• RoHS compliance: ROHS3 Compliant
• Moisture sensitivity: MSL 1

All identified substitute parts meet these core electrical and mechanical specifications. Variations in physical dimensions (height-seated maximum) and specific feature designations (automotive AEC-Q200 vs. moisture resistant) do not affect functional interchangeability within the specified parameter envelope.

Parameter Comparison

Engineering Selection Recommendations

All substitute parts listed maintain active product status and full ROHS3 compliance. Selection among equivalent parts is based on:

Stackpole Electronics Inc (RMCF0805FG10K7 and RMCF0805FT10K7): Both parts are manufactured by the same supplier with identical electrical specifications. RMCF0805FT10K7 offers significantly higher inventory availability (85,018 pcs vs. 762 pcs), making it the preferred choice for high-volume procurement or extended lead-time mitigation.

Vishay Dale (CRCW080510K7FKEA): Maintains full electrical equivalence with the lowest seated height (0.020" / 0.50mm), beneficial for space-constrained PCB layouts. Inventory availability is 43,870 pcs.

Panasonic Electronic Components (ERJ-6ENF1072V): Provides full electrical equivalence with AEC-Q200 automotive qualification. Inventory availability is 22,321 pcs. Seated height is 0.028" (0.70mm).

YAGEO (RC0805FR-0710K7L): Designated as manufacturer-recommended substitute with moisture-resistant feature designation. Maintains full electrical equivalence with seated height of 0.024" (0.60mm). Inventory availability is 40,444 pcs.

Frequently Asked Questions (FAQ)

Q: Can RMCF0805FT10K7 be used as a direct replacement for RMCF0805FG10K7?

A: Yes. Both parts are manufactured by Stackpole Electronics Inc with identical electrical specifications, package dimensions, and performance characteristics. The primary difference is packaging designation (FT vs. FG), which does not affect functional interchangeability.

Q: Are there any height restrictions when substituting with CRCW080510K7FKEA?

A: CRCW080510K7FKEA has a maximum seated height of 0.020" (0.50mm), compared to 0.026" (0.65mm) for the RMCF0805FG10K7. This lower profile is compatible with standard 0805 PCB layouts and may provide advantages in space-constrained designs. Verify PCB clearance specifications if height is a critical constraint.

Q: Do all substitute parts meet automotive AEC-Q200 requirements?

A: RMCF0805FG10K7, RMCF0805FT10K7, CRCW080510K7FKEA, and ERJ-6ENF1072V all carry AEC-Q200 automotive qualification. RC0805FR-0710L is designated as moisture-resistant without explicit AEC-Q200 marking in the provided specifications. Verify automotive qualification requirements for your specific application.

Q: What is the difference between AEC-Q200 and moisture-resistant designations?

A: AEC-Q200 is an automotive qualification standard addressing reliability under automotive operating conditions. Moisture-resistant is a material feature addressing environmental protection. Both designations indicate enhanced reliability; selection depends on application requirements and supply chain strategy.

Q: Are all parts ROHS3 compliant?

A: Yes. All listed parts maintain ROHS3 compliance and MSL 1 (unlimited moisture sensitivity), ensuring compatibility with modern manufacturing processes and environmental regulations.

Q: Which substitute offers the best inventory availability?

A: RMCF0805FT10K7 offers the highest inventory availability at 85,018 pcs, followed by CRCW080510K7FKEA at 43,870 pcs and RC0805FR-0710K7L at 40,444 pcs.