RMCF0201FT953R Equivalent & Substitute Parts

Part Overview

The RMCF0201FT953R is a 953 Ohm ±1% thick film chip resistor manufactured by Stackpole Electronics Inc, rated at 0.05W (1/20W) in a 0201 (0603 Metric) surface mount package. This component is classified as Active product status and is RoHS3 compliant with AEC-Q200 qualification. Substitute parts are identified when equivalent electrical specifications, mechanical dimensions, and compliance certifications align with the original component, enabling direct replacement in circuit designs without performance degradation.

Substiute Parts

RMCF0201FT953R

Stackpole Electronics IncIn Stock: 934RMCF0201FT953R Datasheet

Current PartRFQ

CRCW0201953RFNED

Vishay DaleIn Stock: 17176CRCW0201953RFNED Datasheet

MFR RecommendedRFQ

ERJ-1GNF9530C

Panasonic Electronic ComponentsIn Stock: 46125ERJ-1GNF9530C Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the RMCF0201FT953R are qualified based on the following criteria:

• Resistance value: 953 Ohms
• Tolerance: ±1%
• Power rating: 0.05W (1/20W)
• Package type: 0201 (0603 Metric)
• Composition: Thick Film
• Temperature coefficient: ±200ppm/°C
• RoHS3 compliance
• Moisture Sensitivity Level: 1 (Unlimited)

All identified substitutes maintain these electrical and mechanical specifications, ensuring functional equivalence in circuit applications.

Parameter Comparison

Engineering Selection Recommendations

All three components—RMCF0201FT953R, CRCW0201953RFNED, and ERJ-1GNF9530C—are Active product status with RoHS3 compliance and REACH Unaffected designation. The RMCF0201FT953R and CRCW0201953RFNED share identical operating temperature ranges (-55°C ~ 155°C), while the ERJ-1GNF9530C operates to -55°C ~ 125°C. All components meet the same electrical specifications for resistance, tolerance, power rating, and temperature coefficient. Selection between these parts depends on supply chain availability, inventory levels, and specific application temperature requirements within the stated operating ranges.

Frequently Asked Questions (FAQ)

Q: Can CRCW0201953RFNED or ERJ-1GNF9530C be used as direct replacements for RMCF0201FT953R?

A: Yes, both parts are direct substitutes. All three components share identical resistance (953 Ohms), tolerance (±1%), power rating (0.05W), package type (0201), and composition (Thick Film). Physical dimensions and compliance certifications are equivalent.

Q: What is the difference in operating temperature range between these parts?

A: RMCF0201FT953R and CRCW0201953RFNED operate from -55°C to 155°C. ERJ-1GNF9530C operates from -55°C to 125°C. For applications requiring operation above 125°C, RMCF0201FT953R or CRCW0201953RFNED are required.

Q: Are there height differences between these components?

A: RMCF0201FT953R has a maximum seated height of 0.011" (0.28mm), while CRCW0201953RFNED and ERJ-1GNF9530C both have a maximum seated height of 0.010" (0.26mm). This minor difference is within typical PCB assembly tolerances for 0201 packages.

Q: Do all parts meet RoHS and REACH compliance?

A: Yes, all three components are RoHS3 compliant and REACH Unaffected, meeting current environmental and regulatory requirements.

Q: What is the Moisture Sensitivity Level for these resistors?

A: All three parts have Moisture Sensitivity Level 1 (Unlimited), indicating no moisture sensitivity restrictions during storage or handling.