RMC1/8K8062FTP Equivalent & Substitute Parts

Part Overview

The RMC1/8K8062FTP is an 80.6 kOhms ±1% 0.25W thick film chip resistor in 1206 (3216 Metric) package manufactured by Kamaya Inc. This component is currently Active in product status. Substitute parts are necessary when the primary part experiences supply constraints, inventory depletion, or when design requirements mandate specific certifications such as automotive qualification or enhanced moisture resistance.

Substiute Parts

RMC1/8K8062FTP

Kamaya Inc.In Stock: 865RMC1/8K8062FTP Datasheet

Current PartRFQ

ERJ-8ENF8062V

Panasonic Electronic ComponentsIn Stock: 79493ERJ-8ENF8062V Datasheet

DirectRFQ

MCR18ERTF8062

Rohm SemiconductorIn Stock: 1192MCR18ERTF8062 Datasheet

DirectRFQ

RC1206FR-0780K6L

YAGEOIn Stock: 5379RC1206FR-0780K6L Datasheet

DirectRFQ

RMCF1206FT80K6

Stackpole Electronics IncIn Stock: 1343RMCF1206FT80K6 Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the RMC1/8K8062FTP is determined by strict equivalence across the following parameters:

Critical Matching Parameters:

• Resistance value: 80.6 kOhms
• Tolerance: ±1%
• Power rating: 0.25W (1/4W)
• Package: 1206 (3216 Metric)
• Composition: Thick Film
• Temperature coefficient: ±100ppm/°C
• Operating temperature range: -55°C ~ 155°C
• Moisture sensitivity level: 1 (Unlimited)
• Number of terminations: 2

All substitute parts listed meet these core electrical and mechanical specifications. Variations in physical dimensions (length, width, height) within the 1206 package classification, product status (Active vs. Not For New Designs vs. Discontinued), and optional certifications (AEC-Q200, RoHS3, moisture resistance features) do not disqualify substitution but may influence selection based on application requirements.

Parameter Comparison

Engineering Selection Recommendations

Primary Substitutes (Active Status):

RC1206FR-0780K6L (YAGEO) and RMCF1206FT80K6 (Stackpole) are the preferred substitutes. Both maintain Active product status, ensuring long-term availability and supply chain stability. RC1206FR-0780K6L includes moisture-resistant features. RMCF1206FT80K6 carries AEC-Q200 automotive qualification, suitable for applications requiring automotive-grade reliability.

Secondary Substitutes (Limited Availability):

ERJ-8ENF8062V (Panasonic) is marked "Not For New Designs" and carries AEC-Q200 certification. This part is suitable only for legacy system maintenance or replacement scenarios where automotive qualification is mandatory. MCR18ERTF8062 (Rohm) is discontinued at DiGi Electronics and should be used only when existing inventory is available and no other alternatives are viable.

Selection Criteria:

• For new designs: Select RC1206FR-0780K6L or RMCF1206FT80K6
• For automotive applications: Select RMCF1206FT80K6 (AEC-Q200 certified)
• For moisture-sensitive environments: Select RC1206FR-0780K6L (moisture-resistant feature)
• For legacy system support: ERJ-8ENF8062V or MCR18ERTF8062 if inventory permits

Frequently Asked Questions (FAQ)

Q: Can ERJ-8ENF8062V replace RMC1/8K8062FTP in new designs?

A: ERJ-8ENF8062V is marked "Not For New Designs" by the manufacturer. While electrical and mechanical parameters are equivalent, this designation indicates the part is in end-of-life status. Use RC1206FR-0780K6L or RMCF1206FT80K6 for new designs.

Q: What is the difference between the physical dimensions listed for each part?

A: All parts conform to the 1206 (3216 Metric) package standard. Minor variations in length (0.120" to 0.126"), width (0.061" to 0.063"), and height (0.025" to 0.028") fall within package tolerance specifications and do not affect PCB layout or reflow soldering processes.

Q: Is AEC-Q200 certification required for this application?

A: AEC-Q200 certification is required only for automotive applications. RMCF1206FT80K6 (Stackpole) and ERJ-8ENF8062V (Panasonic) carry this certification. For non-automotive applications, certification is not necessary.

Q: What is the difference between Tape & Reel (TR) and Cut Tape (CT) packaging?

A: Tape & Reel packaging is suitable for automated assembly lines with reel-fed pick-and-place equipment. Cut Tape packaging is used for manual assembly or lower-volume production. MCR18ERTF8062 is supplied in Cut Tape format; all other substitutes use Tape & Reel.

Q: Are all substitute parts RoHS3 compliant?

A: ERJ-8ENF8062V, MCR18ERTF8062, RC1206FR-0780K6L, and RMCF1206FT80K6 are all ROHS3 Compliant. RoHS compliance status for RMC1/8K8062FTP is not specified in the provided data.

Q: Can MCR18ERTF8062 be used despite being discontinued?

A: MCR18ERTF8062 is discontinued at DiGi Electronics but may be available through alternative distributors or existing inventory. Use only when other active substitutes are unavailable and existing stock is confirmed.

Q: Do all parts have the same moisture sensitivity level?

A: Yes. All parts, including the main part RMC1/8K8062FTP and all substitutes, have MSL 1 (Unlimited) rating, indicating no moisture sensitivity restrictions during storage or handling.