RMC1/8K8060FTP Equivalent & Substitute Parts

Part Overview

The RMC1/8K8060FTP is an 806 Ohms ±1% 0.25W thick film chip resistor in 1206 (3216 Metric) package manufactured by Kamaya Inc. This component is classified as Active product status with 1167 pieces currently in stock. Substitute parts are necessary when primary inventory is depleted, when design requirements mandate specific certifications such as AEC-Q200 automotive qualification, or when alternative manufacturers offer improved availability or enhanced features such as moisture resistance or high voltage capability.

Substiute Parts

RMC1/8K8060FTP

Kamaya Inc.In Stock: 1188RMC1/8K8060FTP Datasheet

Current PartRFQ

ERJ-8ENF8060V

Panasonic Electronic ComponentsIn Stock: 198627ERJ-8ENF8060V Datasheet

DirectRFQ

KTR18EZPF8060

Rohm SemiconductorIn Stock: 8621KTR18EZPF8060 Datasheet

DirectRFQ

MCR18ERTF8060

Rohm SemiconductorIn Stock: 4588MCR18ERTF8060 Datasheet

DirectRFQ

RC1206FR-07806RL

YAGEOIn Stock: 27559RC1206FR-07806RL Datasheet

DirectRFQ

RMCF1206FT806R

Stackpole Electronics IncIn Stock: 22201RMCF1206FT806R Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for RMC1/8K8060FTP is determined by strict equivalence across the following parameters: resistance value (806 Ohms), tolerance (±1%), power rating (0.25W), package type (1206), composition (thick film), temperature coefficient (±100ppm/°C), and operating temperature range (-55°C ~ 155°C). All identified substitute parts meet these core electrical and mechanical specifications. Packaging format (Tape & Reel or Cut Tape) does not affect electrical substitutability but may impact procurement and assembly workflows. Additional features such as automotive AEC-Q200 certification or moisture resistance represent enhanced capabilities that do not preclude substitution in non-qualified applications but enable use in more demanding environments.

Parameter Comparison

Engineering Selection Recommendations

Primary Substitutes (Active Status, Recommended for New Designs):

KTR18EZPF8060 (Rohm Semiconductor) and RMCF1206FT806R (Stackpole Electronics Inc) are both Active products with full design support. KTR18EZPF8060 includes high voltage capability in addition to AEC-Q200 automotive qualification. RMCF1206FT806R provides automotive AEC-Q200 certification. Both are suitable for applications requiring long-term supply continuity and design validation support.

RC1206FR-07806RL (YAGEO) is an Active product offering moisture-resistant thick film construction, appropriate for applications in humid or corrosive environments where standard thick film composition may be insufficient.

Secondary Substitutes (Limited Availability or Restricted Status):

ERJ-8ENF8060V (Panasonic Electronic Components) carries "Not For New Designs" status, indicating Panasonic has restricted this part from new design adoption. While electrically equivalent and AEC-Q200 qualified, this part should be used only for legacy design maintenance or replacement scenarios where no alternative exists.

MCR18ERTF8060 (Rohm Semiconductor) is discontinued at DiGi Electronics, limiting procurement channels. This part remains electrically equivalent but should be avoided for new designs due to supply uncertainty.

All substitute parts comply with ROHS3 and REACH requirements where applicable, and maintain MSL 1 (Unlimited) moisture sensitivity rating.

Frequently Asked Questions (FAQ)

Q: Can ERJ-8ENF8060V be used as a direct replacement for RMC1/8K8060FTP?

A: Yes, ERJ-8ENF8060V is electrically and mechanically equivalent. All core parameters—resistance, tolerance, power rating, package, composition, and temperature specifications—are identical. However, ERJ-8ENF8060V carries "Not For New Designs" status from Panasonic, restricting its use to legacy applications or replacement scenarios.

Q: What is the difference between KTR18EZPF8060 and RMCF1206FT806R?

A: Both parts are electrically identical 806 Ohm ±1% 1206 thick film resistors with AEC-Q200 automotive qualification and Active product status. KTR18EZPF8060 includes high voltage capability as an additional feature. Physical dimensions vary slightly: KTR18EZPF8060 has maximum seated height of 0.026" (0.65mm), while RMCF1206FT806R has 0.028" (0.70mm). Selection depends on available inventory and specific application requirements.

Q: Is RC1206FR-07806RL suitable for standard applications?

A: Yes. RC1206FR-07806RL meets all electrical specifications of RMC1/8K8060FTP and is Active status. The moisture-resistant feature provides enhanced performance in humid environments but does not restrict use in standard applications. This part offers good availability (27536 pieces in stock).

Q: Why is MCR18ERTF8060 listed if it is discontinued?

A: MCR18ERTF8060 is included for reference and legacy design support. While discontinued at DiGi Electronics, it remains electrically equivalent and may be available through alternative distribution channels. New designs should prioritize Active status parts.

Q: Do all substitute parts have the same package dimensions?

A: All parts use 1206 (3216 Metric) package. Length and width dimensions are nominally 3.10mm x 1.60mm to 3.20mm x 1.60mm, with maximum seated heights ranging from 0.65mm to 0.70mm. These minor variations are within standard PCB design tolerances and do not affect interchangeability in standard applications.

Q: What does AEC-Q200 certification mean?

A: AEC-Q200 is an automotive qualification standard for passive components. Parts bearing this certification have undergone rigorous testing for reliability in automotive environments. KTR18EZPF8060, ERJ-8ENF8060V, and RMCF1206FT806R all carry AEC-Q200 rating, enabling their use in automotive and high-reliability applications.

Q: Can I mix different substitute parts in the same assembly?

A: Yes. All substitute parts are electrically and mechanically equivalent to RMC1/8K8060FTP and to each other. Mixed sourcing is permissible from an engineering standpoint, though procurement and quality assurance processes may impose additional requirements.