RMC1/8K7500FTP Equivalent & Substitute Parts

Part Overview

The RMC1/8K7500FTP is a 750 Ohm ±1% 0.25W (1/4W) chip resistor manufactured by Kamaya Inc. in 1206 (3216 Metric) package format with thick film composition. This component is classified as Active product status and is currently in stock with 672 pieces available.

Substitute parts are necessary when the primary manufacturer part becomes unavailable, when supply chain optimization is required, or when design specifications allow for alternative qualified components that meet identical electrical and mechanical parameters. All substitute parts listed maintain full compatibility with the original RMC1/8K7500FTP across all critical specifications.

Substiute Parts

RMC1/8K7500FTP

Kamaya Inc.In Stock: 752RMC1/8K7500FTP Datasheet

Current PartRFQ

CRG1206F750R

TE Connectivity Passive ProductIn Stock: 912CRG1206F750R Datasheet

DirectRFQ

ERJ-8ENF7500V

Panasonic Electronic ComponentsIn Stock: 56362ERJ-8ENF7500V Datasheet

DirectRFQ

KTR18EZPF7500

Rohm SemiconductorIn Stock: 8549KTR18EZPF7500 Datasheet

DirectRFQ

RC1206FR-07750RL

YAGEOIn Stock: 171095RC1206FR-07750RL Datasheet

DirectRFQ

RMCF1206FT750R

Stackpole Electronics IncIn Stock: 105831RMCF1206FT750R Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

All substitute parts for RMC1/8K7500FTP are qualified based on the following substitution criteria:

Electrical Parameters (Must Match Exactly):

• Resistance value: 750 Ohms
• Tolerance: ±1%
• Power rating: 0.25W (1/4W)
• Temperature coefficient: ±100ppm/°C
• Operating temperature range: -55°C ~ 155°C

Mechanical Parameters (Must Match Exactly):

• Package type: 1206 (3216 Metric)
• Composition: Thick Film
• Number of terminations: 2
• Moisture Sensitivity Level: 1 (Unlimited)

Regulatory Compliance (Equivalent or Better):

• ECCN: EAR99
• HTSUS: 8533.21.0030
• RoHS Status: ROHS3 Compliant or equivalent

All five substitute parts meet these criteria and are therefore direct functional equivalents to the RMC1/8K7500FTP.

Parameter Comparison

Engineering Selection Recommendations

Primary Substitutes (Active Product Status):

CRG1206F750R (TE Connectivity), KTR18EZPF7500 (Rohm Semiconductor), RC1206FR-07750RL (YAGEO), and RMCF1206FT750R (Stackpole Electronics Inc) are all classified as Active products and represent the preferred substitution options. These parts carry current manufacturer support and are recommended for new designs and ongoing production.

Secondary Substitute (Legacy Status):

ERJ-8ENF7500V (Panasonic Electronic Components) is classified as Not For New Designs. This part carries automotive AEC-Q200 qualification and maintains full electrical and mechanical compatibility with RMC1/8K7500FTP. However, this part should be used only for replacement or maintenance of existing designs where the original specification explicitly requires this component.

Compliance Considerations:

All substitute parts are ROHS3 Compliant and carry EAR99 ECCN classification. KTR18EZPF7500 and RMCF1206FT750R include automotive AEC-Q200 ratings, providing additional qualification for automotive applications. RC1206FR-07750RL includes moisture-resistant features. These certifications do not affect substitution eligibility but may provide additional value for specific application requirements.

Frequently Asked Questions (FAQ)

Q: Can RMC1/8K7500FTP be directly replaced with any of the listed substitute parts?

A: Yes. All five substitute parts meet identical electrical specifications (750 Ohms ±1%, 0.25W, ±100ppm/°C, -55°C ~ 155°C), mechanical specifications (1206 package, thick film composition, 2 terminations), and regulatory requirements (MSL 1, ECCN EAR99, HTSUS 8533.21.0030). Direct substitution is functionally equivalent.

Q: What is the difference between Active and Not For New Designs product status?

A: Active products (CRG1206F750R, KTR18EZPF7500, RC1206FR-07750RL, RMCF1206FT750R) are currently manufactured and supported by their respective manufacturers for new designs. ERJ-8ENF7500V (Not For New Designs) is still available but manufacturers recommend using alternative parts for new circuit designs. For existing production or maintenance applications, ERJ-8ENF7500V remains functionally compatible.

Q: Are there dimensional differences between substitute parts?

A: Minor dimensional variations exist within acceptable tolerances. Length ranges from 0.122" to 0.126" (3.10mm to 3.20mm), width from 0.061" to 0.063" (1.55mm to 1.60mm), and height from 0.025" to 0.028" (0.65mm to 0.70mm). These variations are within standard 1206 package specifications and do not affect PCB layout or assembly compatibility.

Q: Which substitute part has the highest inventory availability?

A: RC1206FR-07750RL (YAGEO) has the highest inventory with 171,036 pieces in stock, followed by RMCF1206FT750R (Stackpole Electronics Inc) with 105,747 pieces. These parts offer superior supply chain availability for high-volume production requirements.

Q: Do any substitute parts include automotive qualification?

A: Yes. KTR18EZPF7500 (Rohm Semiconductor) and RMCF1206FT750R (Stackpole Electronics Inc) both carry automotive AEC-Q200 ratings. These parts are suitable for automotive applications requiring this qualification. ERJ-8ENF7500V (Panasonic Electronic Components) also includes AEC-Q200 rating but carries Not For New Designs status.

Q: What is the significance of Moisture Sensitivity Level 1?

A: MSL 1 (Unlimited) indicates that the component has unlimited shelf life and requires no special moisture control during storage or handling. All parts listed, including RMC1/8K7500FTP and all substitutes, carry MSL 1 classification, eliminating moisture-related handling constraints.

Q: Can packaging format be mixed in production?

A: RMC1/8K7500FTP is supplied in Tape & Reel (TR) format. Most substitutes are also supplied in TR format (CRG1206F750R, ERJ-8ENF7500V, KTR18EZPF7500, RMCF1206FT750R). RC1206FR-07750RL is supplied in Cut Tape (CT) & Digi-Reel® format. Packaging format selection depends on assembly equipment compatibility and production volume requirements.