RMC1/8K6802FTP Equivalent & Substitute Parts

Part Overview

The RMC1/8K6802FTP is a 68 kOhms ±1% 0.25W thick film chip resistor in 1206 (3216 Metric) package manufactured by Kamaya Inc. This component is classified as Active product status with 645 pieces currently in stock. The RMC series represents a standard general-purpose resistor suitable for industrial and commercial applications across the -55°C to 155°C operating temperature range.

Substitute parts are necessary when the primary manufacturer part becomes unavailable, when supply chain optimization is required, or when design specifications allow for equivalent components from alternative manufacturers that meet identical electrical and mechanical parameters.

Substiute Parts

RMC1/8K6802FTP

Kamaya Inc.In Stock: 674RMC1/8K6802FTP Datasheet

Current PartRFQ

CRG1206F68K

TE Connectivity Passive ProductIn Stock: 20453CRG1206F68K Datasheet

DirectRFQ

ERJ-8ENF6802V

Panasonic Electronic ComponentsIn Stock: 120521ERJ-8ENF6802V Datasheet

DirectRFQ

KTR18EZPF6802

Rohm SemiconductorIn Stock: 12206KTR18EZPF6802 Datasheet

DirectRFQ

MCR18ERTF6802

Rohm SemiconductorIn Stock: 1086MCR18ERTF6802 Datasheet

DirectRFQ

RC1206FR-0768KL

YAGEOIn Stock: 55980RC1206FR-0768KL Datasheet

DirectRFQ

RMCF1206FT68K0

Stackpole Electronics IncIn Stock: 44320RMCF1206FT68K0 Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the RMC1/8K6802FTP is determined by strict equivalence across the following critical parameters:

Mandatory Matching Parameters:

• Resistance value: 68 kOhms
• Tolerance: ±1%
• Power rating: 0.25W (1/4W)
• Package: 1206 (3216 Metric)
• Composition: Thick Film
• Temperature coefficient: ±100ppm/°C
• Operating temperature range: -55°C ~ 155°C
• Moisture sensitivity level: 1 (Unlimited)
• Number of terminations: 2

All substitute parts listed below meet these mandatory parameters. Additional features such as Automotive AEC-Q200 certification or moisture resistance represent enhanced specifications that do not prevent substitution but indicate expanded application scope.

Parameter Comparison

Engineering Selection Recommendations

Primary Substitutes (Active Product Status):

CRG1206F68K (TE Connectivity) is a direct equivalent with Active product status and 20,418 pieces in inventory. This part is suitable for new designs and provides reliable long-term availability.

RC1206FR-0768KL (YAGEO) is an Active product with 55,962 pieces in stock, offering the highest inventory availability. This part includes moisture-resistant features and is suitable for applications requiring enhanced environmental protection.

RMCF1206FT68K0 (Stackpole Electronics Inc) is an Active product with 44,296 pieces available. This part includes Automotive AEC-Q200 certification, making it suitable for automotive and high-reliability applications.

KTR18EZPF6802 (Rohm Semiconductor) is an Active product with 12,128 pieces in inventory. This part includes both Automotive AEC-Q200 certification and high-voltage features, suitable for demanding automotive and industrial applications.

Secondary Substitutes (Limited Availability or Restricted Status):

MCR18ERTF6802 (Rohm Semiconductor) is discontinued at DiGi Electronics with only 990 pieces remaining in inventory. This part should be used only when existing stock must be maintained or when alternative sources are available.

ERJ-8ENF6802V (Panasonic Electronic Components) carries "Not For New Designs" status despite 120,417 pieces in inventory. This part is suitable only for replacement or maintenance of existing designs and should not be selected for new product development.

Frequently Asked Questions (FAQ)

Q: Can I substitute RMC1/8K6802FTP with any of the listed parts?

A: Yes, all listed parts meet the mandatory electrical and mechanical parameters: 68 kOhms ±1%, 0.25W power rating, 1206 package, thick film composition, ±100ppm/°C temperature coefficient, and -55°C to 155°C operating range. However, product status should be considered for new designs. Active status parts (CRG1206F68K, RC1206FR-0768KL, RMCF1206FT68K0, KTR18EZPF6802) are recommended for new applications.

Q: What is the difference between parts with and without AEC-Q200 certification?

A: AEC-Q200 certification indicates the part meets automotive industry reliability standards. Parts with this certification (RMCF1206FT68K0, KTR18EZPF6802, ERJ-8ENF6802V) are qualified for automotive applications. Parts without this certification are suitable for general industrial and commercial use. The electrical and mechanical parameters remain identical.

Q: Are there dimensional differences between substitute parts?

A: Minor dimensional variations exist within the 1206 package specification. Length ranges from 0.120" to 0.126" (3.05mm to 3.20mm), width from 0.061" to 0.063" (1.55mm to 1.60mm), and height from 0.025" to 0.028" (0.65mm to 0.70mm). These variations remain within standard 1206 package tolerances and do not affect PCB layout or assembly compatibility.

Q: Should I use MCR18ERTF6802 or ERJ-8ENF6802V for new designs?

A: Neither part is recommended for new designs. MCR18ERTF6802 is discontinued at DiGi Electronics, and ERJ-8ENF6802V carries "Not For New Designs" status. Select from Active status parts: CRG1206F68K, RC1206FR-0768KL, RMCF1206FT68K0, or KTR18EZPF6802.

Q: What does Moisture Sensitivity Level 1 mean?

A: MSL 1 indicates unlimited shelf life with no moisture sensitivity restrictions. All listed parts share this classification, meaning they do not require special moisture-controlled storage or handling procedures.

Q: Can I use RMCF1206FT68K0 in non-automotive applications?

A: Yes. AEC-Q200 certification indicates the part exceeds automotive standards and is therefore suitable for any application within the specified electrical and temperature parameters. The automotive qualification does not restrict use in general industrial or commercial applications.