RMC1/8K6192FTP Equivalent & Substitute Parts

Part Overview

The RMC1/8K6192FTP is a 61.9 kOhms ±1% 0.25W thick film chip resistor in 1206 (3216 Metric) package manufactured by Kamaya Inc. This component is classified as Active product status. Substitute parts are necessary when the primary part becomes unavailable, when alternative sourcing is required for supply chain optimization, or when design requirements specify equivalent components from different manufacturers with identical electrical and mechanical specifications.

Key Parameters

Parameter	Value
Resistance	61.9 kOhms
Tolerance	±1%
Power Rating	0.25W (1/4W)
Composition	Thick Film
Package / Case	1206 (3216 Metric)
Temperature Coefficient	±100ppm/°C
Operating Temperature Range	-55°C ~ 155°C
Moisture Sensitivity Level	1 (Unlimited)
Number of Terminations	2

Substitute Part Grouping Explanation

Substitution of the RMC1/8K6192FTP is determined by strict equivalence across the following critical parameters:

Electrical Parameters (Must Match Exactly):

Resistance value: 61.9 kOhms
Tolerance: ±1%
Power rating: 0.25W (1/4W)
Temperature coefficient: ±100ppm/°C
Operating temperature range: -55°C ~ 155°C

Mechanical Parameters (Must Match Exactly):

Package type: 1206 (3216 Metric)
Number of terminations: 2
Composition: Thick Film

Environmental & Compliance Parameters:

Moisture Sensitivity Level: 1 (Unlimited)
REACH Status: REACH Unaffected
ECCN: EAR99

All substitute parts listed below meet these exact specifications. Dimensional variations within supplier tolerances (length, width, height) do not affect functional equivalence in standard PCB applications.

Parameter Comparison

Manufacturer Part Number	Manufacturer	Resistance	Tolerance	Power (W)	Package	Temp Coeff (ppm/°C)	Operating Temp (°C)	Product Status	Packaging Type
RMC1/8K6192FTP	Kamaya Inc.	61.9 kOhms	±1%	0.25	1206	±100	-55 ~ 155	Active	Tape & Reel
ERJ-8ENF6192V	Panasonic Electronic Components	61.9 kOhms	±1%	0.25	1206	±100	-55 ~ 155	Not For New Designs	Tape & Reel
MCR18ERTF6192	Rohm Semiconductor	61.9 kOhms	±1%	0.25	1206	±100	-55 ~ 155	Discontinued at DiGi Electronics	Cut Tape & Digi-Reel
RC1206FR-0761K9L	YAGEO	61.9 kOhms	±1%	0.25	1206	±100	-55 ~ 155	Active	Tape & Reel
RMCF1206FT61K9	Stackpole Electronics Inc	61.9 kOhms	±1%	0.25	1206	±100	-55 ~ 155	Active	Tape & Reel

Engineering Selection Recommendations

For Active Product Status Applications: RC1206FR-0761K9L (YAGEO) and RMCF1206FT61K9 (Stackpole Electronics Inc) are both classified as Active products. These parts are suitable for new designs and ongoing production. RC1206FR-0761K9L includes moisture-resistant features. RMCF1206FT61K9 includes AEC-Q200 automotive qualification.

For Discontinued or Legacy Product Status: ERJ-8ENF6192V (Panasonic) is marked "Not For New Designs" and MCR18ERTF6192 (Rohm Semiconductor) is "Discontinued at DiGi Electronics." These parts are suitable only for replacement, repair, or legacy system maintenance where the original specification must be maintained.

For Automotive Applications: RMCF1206FT61K9 (Stackpole Electronics Inc) and ERJ-8ENF6192V (Panasonic) both carry AEC-Q200 automotive qualification ratings. These parts are appropriate for automotive-grade circuit designs.

For General Industrial Applications: All listed substitute parts meet the electrical and mechanical specifications of the RMC1/8K6192FTP and are suitable for general industrial applications within the specified operating temperature range.

Frequently Asked Questions (FAQ)

Q: Can ERJ-8ENF6192V replace RMC1/8K6192FTP in new designs? A: ERJ-8ENF6192V is marked "Not For New Designs" by the manufacturer. While it meets all electrical and mechanical specifications, it is not recommended for new product development. Use RC1206FR-0761K9L or RMCF1206FT61K9 for new designs.

Q: What is the difference between the substitute parts? A: All substitute parts have identical electrical specifications (61.9 kOhms ±1%, 0.25W, ±100ppm/°C, -55°C ~ 155°C). Differences exist in product status, packaging format, and optional certifications. RC1206FR-0761K9L includes moisture-resistant features. RMCF1206FT61K9 and ERJ-8ENF6192V include AEC-Q200 automotive qualification.

Q: Are there dimensional differences between substitute parts? A: Minor dimensional variations exist within supplier tolerances. Length ranges from 0.120" to 0.126" (3.05mm to 3.20mm), width is 0.061" to 0.063" (1.55mm to 1.60mm), and height ranges from 0.025" to 0.028" (0.65mm to 0.70mm). These variations do not affect functional equivalence in standard PCB applications.

Q: Which substitute part has the highest inventory availability? A: RC1206FR-0761K9L (YAGEO) has 41,795 pieces in stock, followed by ERJ-8ENF6192V (Panasonic) with 22,230 pieces.

Q: Can I use MCR18ERTF6192 if it is discontinued? A: MCR18ERTF6192 is discontinued at DiGi Electronics but may be available through alternative distributors. For ongoing production, use active-status alternatives: RC1206FR-0761K9L or RMCF1206FT61K9.

Q: Are all substitute parts RoHS3 compliant? A: MCR18ERTF6192, RC1206FR-0761K9L, and RMCF1206FT61K9 are confirmed RoHS3 compliant. RoHS status for ERJ-8ENF6192V is not specified in the provided data.

Q: What packaging formats are available? A: RMC1/8K6192FTP, ERJ-8ENF6192V, RC1206FR-0761K9L, and RMCF1206FT61K9 are supplied in Tape & Reel (TR) format. MCR18ERTF6192 is supplied in Cut Tape (CT) & Digi-Reel® format.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message