RMC1/8K53R6FTP Equivalent & Substitute Parts

Part Overview

The RMC1/8K53R6FTP is a 53.6 Ohm ±1% 0.25W thick film chip resistor manufactured by Kamaya Inc. in 1206 (3216 Metric) surface mount package format. This component is classified as Active product status with 762 pieces currently in stock. The RMC series represents a standard general-purpose resistor line suitable for industrial and commercial applications. Substitute parts are identified when original inventory becomes unavailable, when supply chain constraints occur, or when design requirements necessitate alternative qualified sources meeting identical electrical and mechanical specifications.

Substiute Parts

RMC1/8K53R6FTP

Kamaya Inc.In Stock: 858RMC1/8K53R6FTP Datasheet

Current PartRFQ

ERJ-8ENF53R6V

Panasonic Electronic ComponentsIn Stock: 54998ERJ-8ENF53R6V Datasheet

DirectRFQ

RC1206FR-0753R6L

YAGEOIn Stock: 36206RC1206FR-0753R6L Datasheet

DirectRFQ

RMCF1206FT53R6

Stackpole Electronics IncIn Stock: 893RMCF1206FT53R6 Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the RMC1/8K53R6FTP is determined by strict equivalence across the following critical parameters:

Electrical Parameters (Non-Negotiable):

• Resistance value: 53.6 Ohms
• Tolerance: ±1%
• Power rating: 0.25W (1/4W)
• Temperature coefficient: ±100ppm/°C
• Operating temperature range: -55°C ~ 155°C

Mechanical Parameters (Non-Negotiable):

• Package type: 1206 (3216 Metric)
• Number of terminations: 2
• Composition: Thick Film

Environmental & Compliance Parameters:

• Moisture Sensitivity Level: 1 (Unlimited)
• REACH Status: REACH Unaffected
• Packaging: Tape & Reel (TR)

All identified substitute parts meet these parameters without exception. Substitutes are grouped by manufacturer and product status to facilitate selection based on supply availability and design phase requirements.

Parameter Comparison

Engineering Selection Recommendations

For Active Product Designs: RC1206FR-0753R6L (YAGEO) and RMCF1206FT53R6 (Stackpole) are both classified as Active product status and are suitable for new design implementations. RMCF1206FT53R6 carries AEC-Q200 automotive qualification, making it appropriate for automotive and high-reliability applications. RC1206FR-0753R6L features moisture-resistant construction and ROHS3 compliance for general industrial applications.

For Automotive and High-Reliability Applications: RMCF1206FT53R6 (Stackpole) is the preferred substitute when AEC-Q200 qualification is required. ERJ-8ENF53R6V (Panasonic) also carries AEC-Q200 rating but is classified as Not For New Designs, limiting its use to legacy system maintenance or replacement scenarios.

For General Industrial Applications: RC1206FR-0753R6L (YAGEO) provides an Active status alternative with moisture-resistant features and ROHS3 compliance suitable for standard industrial circuit designs.

Inventory Considerations: YAGEO RC1206FR-0753R6L maintains the highest inventory level (36,115 pieces), followed by Panasonic ERJ-8ENF53R6V (54,952 pieces). Stackpole RMCF1206FT53R6 maintains lower inventory (872 pieces). Original Kamaya RMC1/8K53R6FTP has 762 pieces in stock.

Frequently Asked Questions (FAQ)

Q: Can ERJ-8ENF53R6V be used in new product designs? A: ERJ-8ENF53R6V is classified as Not For New Designs. While electrically and mechanically equivalent, this designation indicates the manufacturer recommends against its use in new design implementations. Use RC1206FR-0753R6L or RMCF1206FT53R6 for new designs.

Q: What is the difference between RC1206FR-0753R6L and RMCF1206FT53R6? A: Both parts are electrically identical at 53.6 Ohms ±1% 0.25W in 1206 package. RMCF1206FT53R6 carries AEC-Q200 automotive qualification; RC1206FR-0753R6L features moisture-resistant construction. Selection depends on application requirements: automotive/high-reliability versus general industrial.

Q: Are all substitute parts pin-compatible with RMC1/8K53R6FTP? A: Yes. All substitute parts use identical 1206 (3216 Metric) package format with 2 terminations, ensuring direct footprint compatibility on PCB layouts.

Q: Do substitute parts meet the same temperature specifications? A: Yes. All substitute parts operate across the identical temperature range of -55°C ~ 155°C with ±100ppm/°C temperature coefficient, matching RMC1/8K53R6FTP specifications.

Q: Which substitute part has the best long-term availability? A: YAGEO RC1206FR-0753R6L maintains the highest inventory (36,115 pieces) and Active product status, indicating strong long-term availability for procurement planning.

Q: Are all substitutes REACH compliant? A: Yes. All substitute parts carry REACH Unaffected status, identical to the original RMC1/8K53R6FTP, ensuring regulatory compliance across all alternatives.

Q: What is the significance of MSL 1 (Unlimited) rating? A: MSL 1 (Unlimited) indicates these components have unlimited shelf life and require no special moisture control during storage or handling, simplifying inventory management and reducing storage costs.