RMC1/8K5362FTP Equivalent & Substitute Parts

Part Overview

The RMC1/8K5362FTP is a 53.6 kOhms ±1% 0.25W thick film chip resistor manufactured by Kamaya Inc. in 1206 (3216 Metric) surface mount package format. This component is classified as Active product status with unlimited moisture sensitivity rating (MSL 1). Substitute parts are necessary when the primary part experiences supply constraints, extended lead times, or when design requirements mandate specific manufacturer certifications such as automotive AEC-Q200 qualification or enhanced feature sets including high voltage capability.

Substiute Parts

RMC1/8K5362FTP

Kamaya Inc.In Stock: 816RMC1/8K5362FTP Datasheet

Current PartRFQ

ERJ-8ENF5362V

Panasonic Electronic ComponentsIn Stock: 49556ERJ-8ENF5362V Datasheet

DirectRFQ

KTR18EZPF5362

Rohm SemiconductorIn Stock: 9678KTR18EZPF5362 Datasheet

DirectRFQ

MCR18ERTF5362

Rohm SemiconductorIn Stock: 1674MCR18ERTF5362 Datasheet

DirectRFQ

RC1206FR-0753K6L

YAGEOIn Stock: 9417RC1206FR-0753K6L Datasheet

DirectRFQ

RMCF1206FT53K6

Stackpole Electronics IncIn Stock: 2443RMCF1206FT53K6 Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the RMC1/8K5362FTP is determined by strict equivalence across the following parameters: resistance value (53.6 kOhms), tolerance (±1%), power rating (0.25W), package format (1206), composition (thick film), temperature coefficient (±100ppm/°C), operating temperature range (-55°C ~ 155°C), and moisture sensitivity level (MSL 1). All identified substitute parts meet these core electrical and mechanical requirements. Substitute parts are further categorized by product status (Active, Not For New Designs, or Discontinued) and optional certifications (Automotive AEC-Q200, High Voltage capability). Packaging format variations (Tape & Reel versus Cut Tape) do not affect electrical equivalence but may impact procurement and assembly workflows.

Parameter Comparison

Engineering Selection Recommendations

Active Status Substitutes (Preferred for New Designs):

KTR18EZPF5362 (Rohm Semiconductor) is recommended as the primary substitute when high voltage capability is required. This part maintains Active product status and carries Automotive AEC-Q200 certification. RMCF1206FT53K6 (Stackpole Electronics Inc) is recommended for automotive applications requiring AEC-Q200 compliance with Active product status. RC1206FR-0753K6L (YAGEO) is recommended for applications requiring moisture-resistant thick film construction with Active product status.

Legacy or Constrained Supply Substitutes:

ERJ-8ENF5362V (Panasonic Electronic Components) carries Automotive AEC-Q200 certification but is marked Not For New Designs. This part is suitable only for replacement or legacy system maintenance. MCR18ERTF5362 (Rohm Semiconductor) is Discontinued at DiGi Electronics and should be used only when existing inventory is available and no other substitute is feasible.

All substitute parts are RoHS3 Compliant, REACH Unaffected, and classified under ECCN EAR99 with identical HTSUS code 8533.21.0030, ensuring regulatory equivalence with the primary part.

Frequently Asked Questions (FAQ)

Q: Can ERJ-8ENF5362V replace RMC1/8K5362FTP in new designs?

A: ERJ-8ENF5362V is electrically and mechanically equivalent but carries Not For New Designs status. Use only for replacement applications or legacy system support. For new designs, select KTR18EZPF5362, RMCF1206FT53K6, or RC1206FR-0753K6L, all marked Active.

Q: What is the difference between Tape & Reel and Cut Tape packaging?

A: Both packaging formats contain identical electrical components. Tape & Reel (TR) is supplied on continuous carrier tape suitable for automated pick-and-place assembly. Cut Tape (CT) & Digi-Reel is supplied in shorter tape segments. Selection depends on assembly equipment compatibility and procurement volume requirements.

Q: Are all substitute parts RoHS compliant?

A: All substitute parts listed are RoHS3 Compliant. The primary part RMC1/8K5362FTP does not specify RoHS status in provided data but is functionally equivalent to RoHS3 compliant substitutes.

Q: Which substitute part should I use for automotive applications?

A: For automotive applications, select either KTR18EZPF5362 (Active status, high voltage capable) or RMCF1206FT53K6 (Active status). Both carry Automotive AEC-Q200 certification. ERJ-8ENF5362V also qualifies but is Not For New Designs.

Q: What does MSL 1 (Unlimited) mean?

A: Moisture Sensitivity Level 1 indicates unlimited shelf life without moisture control requirements. All parts in this comparison carry MSL 1, confirming no special storage or handling precautions are necessary.

Q: Can I use MCR18ERTF5362 as a substitute?

A: MCR18ERTF5362 is electrically and mechanically equivalent but is Discontinued at DiGi Electronics. Use only if existing inventory is available. For new procurement, select from Active status alternatives: KTR18EZPF5362, RMCF1206FT53K6, or RC1206FR-0753K6L.

Q: Are there dimensional differences between substitute parts?

A: Minor dimensional variations exist within 1206 package tolerance. Length ranges from 0.120" to 0.126" (3.05mm to 3.20mm), width is 0.061" to 0.063" (1.55mm to 1.60mm), and height ranges from 0.025" to 0.028" (0.65mm to 0.70mm). All variations remain within standard 1206 package specifications and do not affect PCB layout or assembly compatibility.