RMC1/8K2262FTP Equivalent & Substitute Parts

Part Overview

The RMC1/8K2262FTP is a 22.6 kOhms ±1% 0.25W thick film chip resistor manufactured by Kamaya Inc. in 1206 (3216 Metric) surface mount package format. This component is classified as Active product status and is supplied in Tape & Reel packaging. Substitute parts are necessary when the primary manufacturer part becomes unavailable, when alternative sourcing is required for supply chain optimization, or when design requirements specify equivalent components from qualified manufacturers meeting identical electrical and mechanical specifications.

Substiute Parts

RMC1/8K2262FTP

Kamaya Inc.In Stock: 845RMC1/8K2262FTP Datasheet

Current PartRFQ

ERJ-8ENF2262V

Panasonic Electronic ComponentsIn Stock: 55520ERJ-8ENF2262V Datasheet

DirectRFQ

RC1206FR-0722K6L

YAGEOIn Stock: 31641RC1206FR-0722K6L Datasheet

DirectRFQ

RMCF1206FT22K6

Stackpole Electronics IncIn Stock: 2457RMCF1206FT22K6 Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution validity for the RMC1/8K2262FTP is determined by strict equivalence across the following critical parameters:

Electrical Parameters (Non-Negotiable):

• Resistance value: 22.6 kOhms
• Tolerance: ±1%
• Power rating: 0.25W (1/4W)
• Temperature coefficient: ±100ppm/°C
• Operating temperature range: -55°C ~ 155°C

Mechanical Parameters (Non-Negotiable):

• Package type: 1206 (3216 Metric)
• Composition: Thick Film
• Number of terminations: 2
• Moisture sensitivity level: 1 (Unlimited)

Compliance Parameters:

• REACH Status: REACH Unaffected
• ECCN: EAR99
• HTSUS: 8533.21.0030

All substitute parts listed below meet these exact specifications. Dimensional variations within supplier device package tolerances do not affect functional equivalence.

Parameter Comparison

Engineering Selection Recommendations

Primary Selection (Active Status, No Restrictions):

• RC1206FR-0722K6L (YAGEO): Active product status with ROHS3 compliance and moisture-resistant features. Suitable for new designs without application constraints.
• RMCF1206FT22K6 (Stackpole Electronics Inc): Active product status with AEC-Q200 automotive qualification and ROHS3 compliance. Recommended for automotive and high-reliability applications.

Secondary Selection (Active Status, Specific Applications):

• RMC1/8K2262FTP (Kamaya Inc.): Original part number with Active status. Use when Kamaya supply chain is preferred or when existing inventory is available.

Restricted Selection (Not For New Designs):

• ERJ-8ENF2262V (Panasonic Electronic Components): Marked as "Not For New Designs." This part is electrically and mechanically equivalent but should only be used for replacement or maintenance of existing assemblies. Not suitable for new product development.

All four parts are functionally interchangeable based on electrical and mechanical parameters. Selection should prioritize Active status parts for new designs. Automotive applications benefit from AEC-Q200 qualified options (Panasonic ERJ-8ENF2262V and Stackpole RMCF1206FT22K6).

Frequently Asked Questions (FAQ)

Q: Can ERJ-8ENF2262V be used in new product designs? A: No. ERJ-8ENF2262V carries a "Not For New Designs" status. This part is electrically and mechanically equivalent to RMC1/8K2262FTP but is restricted to replacement and maintenance applications only. For new designs, use RC1206FR-0722K6L or RMCF1206FT22K6.

Q: What is the difference between the substitute parts? A: All substitute parts share identical electrical specifications (22.6 kOhms ±1%, 0.25W, ±100ppm/°C, -55°C ~ 155°C). Differences exist in product status, compliance certifications, and manufacturer features. RMCF1206FT22K6 and ERJ-8ENF2262V include AEC-Q200 automotive qualification. RC1206FR-0722K6L emphasizes moisture-resistant construction. All are ROHS3 compliant except RMC1/8K2262FTP.

Q: Are there dimensional differences between these parts? A: Minor dimensional variations exist within supplier device package tolerances. RMC1/8K2262FTP and RC1206FR-0722K6L measure 0.122" L x 0.063" W (3.10mm x 1.60mm) with 0.025" (0.65mm) maximum seated height. ERJ-8ENF2262V and RMCF1206FT22K6 measure 0.126" L x 0.063" W (3.20mm x 1.60mm) with 0.028" (0.70mm) maximum seated height. These variations do not affect PCB layout compatibility for standard 1206 footprints.

Q: Which part should I select for automotive applications? A: RMCF1206FT22K6 (Stackpole Electronics Inc) is the primary recommendation for automotive applications. It carries Active product status, AEC-Q200 qualification, and ROHS3 compliance. ERJ-8ENF2262V (Panasonic) also meets AEC-Q200 requirements but is restricted to replacement applications.

Q: Are all parts REACH compliant? A: Yes. All four parts carry REACH Unaffected status, indicating compliance with REACH regulations. All parts also share identical ECCN (EAR99) and HTSUS (8533.21.0030) classifications.

Q: What is the MSL rating and why does it matter? A: All parts carry MSL 1 (Unlimited) rating, indicating unlimited shelf life without moisture bake-out requirements. This simplifies inventory management and reduces handling constraints during assembly.