RMC1/8K1962FTP Equivalent & Substitute Parts

Part Overview

The RMC1/8K1962FTP is a 19.6 kOhms ±1% 0.25W thick film chip resistor in 1206 (3216 Metric) surface mount package manufactured by Kamaya Inc. This component is classified as Active product status. Substitute parts are necessary when the primary part experiences supply constraints, extended lead times, or when design requirements mandate specific manufacturer certifications such as automotive AEC-Q200 qualification or enhanced moisture resistance features.

Substiute Parts

RMC1/8K1962FTP

Kamaya Inc.In Stock: 814RMC1/8K1962FTP Datasheet

Current PartRFQ

ERJ-8ENF1962V

Panasonic Electronic ComponentsIn Stock: 47318ERJ-8ENF1962V Datasheet

DirectRFQ

RC1206FR-0719K6L

YAGEOIn Stock: 15214RC1206FR-0719K6L Datasheet

DirectRFQ

RMCF1206FT19K6

Stackpole Electronics IncIn Stock: 748RMCF1206FT19K6 Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the RMC1/8K1962FTP is determined by strict equivalence across the following parameters:

Critical Matching Parameters:

• Resistance value: 19.6 kOhms
• Tolerance: ±1%
• Power rating: 0.25W (1/4W)
• Package: 1206 (3216 Metric)
• Composition: Thick Film
• Temperature coefficient: ±100ppm/°C
• Operating temperature range: -55°C ~ 155°C
• MSL rating: 1 (Unlimited)
• Termination count: 2

All substitute parts listed meet these core electrical and mechanical specifications. Variations in physical dimensions (length, width, height) within the 1206 package tolerance and differences in product status or certifications do not disqualify substitution but may influence selection based on application requirements.

Parameter Comparison

Engineering Selection Recommendations

Primary Substitute (Preferred): RC1206FR-0719K6L (YAGEO)

The RC1206FR-0719K6L maintains Active product status, ensuring long-term availability and continued manufacturer support. It provides moisture-resistant construction and ROHS3 compliance. Physical dimensions align with standard 1206 package specifications. This part is suitable for general industrial and commercial applications.

Secondary Substitute (Automotive Applications): RMCF1206FT19K6 (Stackpole Electronics Inc)

The RMCF1206FT19K6 is qualified to AEC-Q200 automotive standards and maintains Active product status. This part is appropriate for automotive and high-reliability applications requiring automotive-grade component certification. ROHS3 compliance is confirmed.

Alternative Substitute (Automotive Applications): ERJ-8ENF1962V (Panasonic Electronic Components)

The ERJ-8ENF1962V carries AEC-Q200 automotive qualification and ROHS3 compliance. However, this part is designated as Not For New Designs. Selection of this part is limited to replacement or maintenance scenarios for existing designs already utilizing this component.

All three substitute parts satisfy the core electrical and mechanical requirements of the RMC1/8K1962FTP and are electrically interchangeable within the specified parameter tolerances.

Frequently Asked Questions (FAQ)

Q: Can ERJ-8ENF1962V replace RMC1/8K1962FTP in new designs?

A: ERJ-8ENF1962V is designated Not For New Designs. For new designs, use RC1206FR-0719K6L or RMCF1206FT19K6 instead.

Q: What is the difference between the substitute parts?

A: All substitute parts share identical electrical specifications (19.6 kOhms ±1%, 0.25W, ±100ppm/°C, -55°C ~ 155°C). Differences exist in product status, certifications, and special features. RC1206FR-0719K6L offers moisture-resistant construction. RMCF1206FT19K6 and ERJ-8ENF1962V provide AEC-Q200 automotive certification.

Q: Are there physical dimension differences between these parts?

A: Minor variations exist within 1206 package tolerance. RMC1/8K1962FTP and RC1206FR-0719K6L measure 0.122" L x 0.063" W with 0.025" max height. ERJ-8ENF1962V and RMCF1206FT19K6 measure 0.126" L x 0.063" W with 0.028" max height. Both configurations are within standard 1206 (3216 Metric) specifications and are mechanically compatible with standard PCB footprints.

Q: Which substitute should I use for automotive applications?

A: For new automotive designs, use RMCF1206FT19K6 (Stackpole). For existing designs currently using automotive-qualified parts, ERJ-8ENF1962V (Panasonic) is available as a replacement option.

Q: Are all substitute parts RoHS compliant?

A: RC1206FR-0719K6L, RMCF1206FT19K6, and ERJ-8ENF1962V are all ROHS3 compliant. RoHS status for RMC1/8K1962FTP is not specified in available documentation.

Q: What is MSL rating and why is it important?

A: MSL (Moisture Sensitivity Level) 1 indicates unlimited shelf life without moisture control requirements. All listed parts carry MSL 1 rating, eliminating moisture-related handling constraints.

Q: Can I use these parts interchangeably on the same PCB?

A: Yes. All parts are electrically equivalent and mechanically compatible with standard 1206 footprints. Minor physical dimension variations do not affect PCB assembly or electrical performance.