RMC1/8K1620FTP Equivalent & Substitute Parts

Part Overview

The RMC1/8K1620FTP is a 162 Ohm ±1% 0.25W thick film chip resistor in 1206 (3216 Metric) package manufactured by Kamaya Inc. This component is classified as Active product status. Substitute parts are identified when the main part becomes unavailable, when design requirements mandate specific certifications such as AEC-Q200 automotive qualification, or when alternative manufacturers offer equivalent electrical and mechanical specifications within the defined tolerance parameters.

Substiute Parts

RMC1/8K1620FTP

Kamaya Inc.In Stock: 955RMC1/8K1620FTP Datasheet

Current PartRFQ

ERJ-8ENF1620V

Panasonic Electronic ComponentsIn Stock: 71339ERJ-8ENF1620V Datasheet

DirectRFQ

KTR18EZPF1620

Rohm SemiconductorIn Stock: 4680KTR18EZPF1620 Datasheet

DirectRFQ

RC1206FR-07162RL

YAGEOIn Stock: 82015RC1206FR-07162RL Datasheet

DirectRFQ

RMCF1206FT162R

Stackpole Electronics IncIn Stock: 5176RMCF1206FT162R Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the RMC1/8K1620FTP is determined by strict equivalence across the following parameters: resistance value (162 Ohms), tolerance (±1%), power rating (0.25W), composition (thick film), package type (1206), temperature coefficient (±100ppm/°C), and operating temperature range (-55°C ~ 155°C). All identified substitute parts meet these core electrical and mechanical specifications. Additional qualifications such as AEC-Q200 automotive certification and moisture-resistant features represent enhanced capabilities that do not disqualify a part from substitution but indicate suitability for specific application environments. Packaging format (Tape & Reel) and moisture sensitivity level (MSL 1) are consistent across all parts listed.

Parameter Comparison

Engineering Selection Recommendations

For general-purpose applications: RC1206FR-07162RL (YAGEO) or RMCF1206FT162R (Stackpole Electronics Inc) are suitable selections. Both maintain Active product status and provide moisture-resistant or automotive-grade construction respectively.

For automotive applications requiring AEC-Q200 certification: KTR18EZPF1620 (Rohm Semiconductor) or RMCF1206FT162R (Stackpole Electronics Inc) are appropriate choices. Both are Active products with AEC-Q200 qualification. KTR18EZPF1620 includes high-voltage capability.

For applications with legacy design constraints: ERJ-8ENF1620V (Panasonic Electronic Components) remains functionally equivalent but carries Not For New Designs status, indicating it should not be selected for new product development.

All substitute parts are ROHS3 compliant, REACH unaffected, and classified under ECCN EAR99 and HTSUS 8533.21.0030, matching the regulatory profile of the main part.

Frequently Asked Questions (FAQ)

Q: Can ERJ-8ENF1620V be used as a direct replacement for RMC1/8K1620FTP?

A: Electrical and mechanical specifications are equivalent. However, ERJ-8ENF1620V carries Not For New Designs status. Use only in legacy or maintenance applications where the original part is unavailable.

Q: What is the difference between KTR18EZPF1620 and RMCF1206FT162R?

A: Both are Active products with AEC-Q200 automotive certification and identical electrical parameters. KTR18EZPF1620 includes high-voltage capability. Selection depends on application-specific voltage requirements and supplier availability.

Q: Are all substitute parts suitable for high-temperature environments?

A: All parts share the same operating temperature range (-55°C ~ 155°C) and temperature coefficient (±100ppm/°C). Selection among substitutes is not differentiated by thermal performance.

Q: Does package size vary among substitute parts?

A: All parts use 1206 (3216 Metric) package. Physical dimensions vary slightly: RMC1/8K1620FTP and RC1206FR-07162RL measure 0.122" L × 0.063" W, while ERJ-8ENF1620V, KTR18EZPF1620, and RMCF1206FT162R measure 0.126" L × 0.063" W. Height differences range from 0.025" to 0.028" maximum seated height. Verify PCB layout compatibility before substitution.

Q: What certifications apply to all listed parts?

A: All parts are ROHS3 compliant, REACH unaffected, and MSL 1 (Unlimited moisture sensitivity). AEC-Q200 automotive qualification applies only to ERJ-8ENF1620V, KTR18EZPF1620, and RMCF1206FT162R.

Q: Is tolerance specification identical across all parts?

A: Yes. All parts maintain ±1% tolerance on 162 Ohm resistance value, ensuring interchangeability within circuit design specifications.