RMC1/8K1302FTP Equivalent & Substitute Parts

Part Overview

The RMC1/8K1302FTP is a 13 kOhms ±1% 0.25W thick film chip resistor manufactured by Kamaya Inc. in 1206 (3216 Metric) surface mount package format. This component is classified as Active product status with unlimited moisture sensitivity rating (MSL 1). The part is supplied in Tape & Reel packaging with 838 pieces currently in stock inventory.

Substitute parts are identified when equivalent electrical specifications, mechanical dimensions, and packaging standards align with the main part number. Substitution becomes necessary due to supply chain availability, manufacturing discontinuation, or design requirement changes that permit alternative qualified sources.

Substiute Parts

RMC1/8K1302FTP

Kamaya Inc.In Stock: 901RMC1/8K1302FTP Datasheet

Current PartRFQ

CRG1206F13K

TE Connectivity Passive ProductIn Stock: 1083CRG1206F13K Datasheet

DirectRFQ

ERJ-8ENF1302V

Panasonic Electronic ComponentsIn Stock: 51016ERJ-8ENF1302V Datasheet

DirectRFQ

RC1206FR-0713KL

YAGEOIn Stock: 68424RC1206FR-0713KL Datasheet

DirectRFQ

RMCF1206FT13K0

Stackpole Electronics IncIn Stock: 75897RMCF1206FT13K0 Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for RMC1/8K1302FTP is determined by strict alignment of the following parameters:

Critical Electrical Parameters:

• Resistance value: 13 kOhms
• Tolerance: ±1%
• Power rating: 0.25W (1/4W)
• Temperature coefficient: ±100ppm/°C
• Operating temperature range: -55°C ~ 155°C

Critical Mechanical Parameters:

• Package type: 1206 (3216 Metric)
• Number of terminations: 2
• Composition: Thick Film
• Moisture sensitivity level: 1 (Unlimited)

Packaging Requirements:

• Tape & Reel (TR) format

All four substitute parts listed meet these criteria. Variations in physical dimensions (length, width, height) within standard 1206 package tolerances do not disqualify substitution. Product status, compliance certifications, and feature sets are secondary considerations that may influence selection priority but do not prevent functional substitution.

Parameter Comparison

Engineering Selection Recommendations

All four substitute parts satisfy the core electrical and mechanical requirements for direct substitution with RMC1/8K1302FTP. Selection priority is determined by product lifecycle status and compliance certifications:

Tier 1 - Active Status with Full Compliance:

• RC1206FR-0713KL (YAGEO): Active product status, ROHS3 compliant, REACH unaffected. Highest inventory availability (68,398 pieces). Moisture resistant feature provides additional environmental protection.
• RMCF1206FT13K0 (Stackpole Electronics): Active product status, ROHS3 compliant, REACH unaffected. Automotive AEC-Q200 rated. Suitable for applications requiring automotive-grade qualification.
• CRG1206F13K (TE Connectivity): Active product status, ROHS3 compliant. Neohm series designation. Moderate inventory availability (1,046 pieces).

Tier 2 - Not For New Designs:

• ERJ-8ENF1302V (Panasonic): Product status classified as "Not For New Designs." Automotive AEC-Q200 rated. Highest inventory availability (51,005 pieces). Suitable only for legacy design maintenance or existing production continuity.

For new circuit designs, select from Tier 1 options. For automotive applications, RMCF1206FT13K0 provides AEC-Q200 qualification. For general industrial applications with maximum supply assurance, RC1206FR-0713KL offers the largest inventory buffer.

Frequently Asked Questions (FAQ)

Q: Can RC1206FR-0713KL replace RMC1/8K1302FTP in existing designs?

A: Yes. Both parts share identical electrical specifications (13 kOhms ±1%, 0.25W, ±100ppm/°C, -55°C to 155°C), composition (thick film), package format (1206), and moisture sensitivity rating (MSL 1). Physical dimensions fall within standard 1206 package tolerances. Footprint compatibility is confirmed.

Q: What is the difference between RMCF1206FT13K0 and other substitutes?

A: RMCF1206FT13K0 carries Automotive AEC-Q200 qualification, indicating compliance with automotive reliability standards. This certification is not present in other substitutes. Select this part for automotive applications or when AEC-Q200 compliance is contractually required.

Q: Why is ERJ-8ENF1302V marked "Not For New Designs"?

A: This designation indicates the manufacturer has discontinued active development and recommends against use in new circuit designs. The part remains available for existing production support and legacy system maintenance. For new designs, select from Active status alternatives.

Q: Are there dimensional differences between substitute parts?

A: Minor variations exist within standard 1206 package tolerances. Length ranges from 0.122" to 0.126" (3.10mm to 3.20mm), width from 0.061" to 0.063" (1.55mm to 1.60mm), and height from 0.025" to 0.028" (0.65mm to 0.70mm). These variations do not affect PCB footprint compatibility or electrical performance.

Q: Which substitute offers the best supply availability?

A: RC1206FR-0713KL (YAGEO) provides the highest inventory level at 68,398 pieces. ERJ-8ENF1302V (Panasonic) offers 51,005 pieces. Both ensure supply continuity for high-volume production requirements.

Q: Do all substitutes comply with RoHS and REACH regulations?

A: All four substitutes are ROHS3 compliant. REACH status varies: RC1206FR-0713KL, ERJ-8ENF1302V, and RMCF1206FT13K0 are REACH unaffected. CRG1206F13K shows vendor undefined REACH status. Verify REACH compliance with your supplier for applications in restricted markets.

Q: Can substitutes be mixed in the same production batch?

A: Yes. All substitutes meet identical electrical and mechanical specifications. Mixed sourcing is permissible from a functional standpoint. However, verify traceability and documentation requirements for your quality management system before implementing multi-source procurement.