RMC1/8-151JTP Equivalent & Substitute Parts Reference

Part Overview

The RMC1/8-151JTP, manufactured by Kamaya Inc., is a 150 Ohm, ±5% tolerance, 0.25W, 1206 (3216 Metric) thick film chip resistor. It is supplied in Tape & Reel packaging and holds an active status within its series. This resistor is commonly used in general electronic circuits where stable resistance and size consistency are required. Locating equivalent or substitute parts is necessary in cases of inventory shortages, lifecycle status changes, or requirements for equivalent performance within the same footprint and electrical parameters.

Substiute Parts

RMC1/8-151JTP

Kamaya Inc.In Stock: 1067RMC1/8-151JTP Datasheet

Current PartRFQ

ERJ-8GEYJ151V

Panasonic Electronic ComponentsIn Stock: 86078ERJ-8GEYJ151V Datasheet

DirectRFQ

RMCF1206JG150R

Stackpole Electronics IncIn Stock: 10767RMCF1206JG150R Datasheet

DirectRFQ

RMCF1206JT150R

Stackpole Electronics IncIn Stock: 66360RMCF1206JT150R Datasheet

DirectRFQ

CRG1206F150R

TE Connectivity Passive ProductIn Stock: 20260CRG1206F150R Datasheet

UpgradeRFQ

ERJ-8ENF1500V

Panasonic Electronic ComponentsIn Stock: 102277ERJ-8ENF1500V Datasheet

UpgradeRFQ

RC1206FR-07150RL

YAGEOIn Stock: 1181RC1206FR-07150RL Datasheet

UpgradeRFQ

RC1206JR-07150RL

YAGEOIn Stock: 83846RC1206JR-07150RL Datasheet

UpgradeRFQ

RMCF1206FG150R

Stackpole Electronics IncIn Stock: 91334RMCF1206FG150R Datasheet

UpgradeRFQ

RMCF1206FT150R

Stackpole Electronics IncIn Stock: 128064RMCF1206FT150R Datasheet

UpgradeRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution is determined strictly according to compatibility in resistance value, tolerance, power rating, composition, temperature coefficient, package and case size, number of terminations, and industry compliance. Only resistors meeting all these parameters and dimensions within the 1206 (3216 Metric) SMD resistor product category are included. Only parts with clearly defined compliance to REACH, RoHS, MSL, and ECCN comparable to the original are considered. Substitute parts may include direct matches (same parameters) or upgrades (tighter tolerance or improved temperature coefficient), as provided.

Parameter Comparison

Engineering Selection Recommendations

Select substitute resistors that fully match original key parameters including resistance value, tolerance, power rating, thick film composition, package/case (1206), and temperature coefficient. All listed substitutes hold comparable compliance declarations, including Moisture Sensitivity Level 1 (Unlimited), REACH Unaffected, and ECCN EAR99. When product status indicates "Not For New Designs", prioritize substitutes that are "Active" to maintain longevity in supply chain continuity. Substitute parts categorized as "Upgrade" offer improved tolerance or temperature stability within the same dimensions and footprint.

Frequently Asked Questions (FAQ)

Q: What electrical parameters are critical for substituting the RMC1/8-151JTP?
A: Resistance value (150 Ohms), tolerance (±5% minimum), power rating (0.25W), composition (thick film), temperature coefficient, and number of terminations must all match. Package/case must be 1206 (3216 Metric).

Q: Can I use a resistor with a tighter tolerance or lower temperature coefficient?
A: Yes, substitutes with equal or tighter tolerance and lower or equal temperature coefficient are within the allowed substitution profile, as long as all other parameters match.

Q: Are all substitute parts RoHS and REACH compliant?
A: All substitute resistors listed declare REACH Unaffected and MSL 1 (Unlimited) in the supplied parameters.

Q: How do I ensure mechanical compatibility with my PCB?
A: All substitute resistors have the same 1206 (3216 Metric) package. Minor differences in length/width within package tolerances are standard for SMD 1206 and do not affect solderability or board fit, as shown in the parameter tables.

Q: If the main part is active, why review substitutes?
A: Reviewing substitutes maintains sourcing flexibility, risk mitigation, and persistent supply chain availability, especially when managing larger or multi-vendor manufacturing requirements.

Q: Can a substitute with an improved feature set replace the original without modification?
A: Substitute resistors with improved characteristics (e.g., automotive or moisture resistance) and the same electrical and mechanical parameters can be used as direct drop-in replacements.