RMC1/16K5900FTP Equivalent & Substitute Parts

Part Overview

The RMC1/16K5900FTP is a 590 Ohm ±1% thick film chip resistor manufactured by Kamaya Inc., rated at 0.1W (1/10W) in a 0603 (1608 Metric) surface mount package. This component is classified as Active product status and is supplied in Tape & Reel packaging. Equivalent and substitute parts are identified based on matching electrical specifications, mechanical dimensions, and packaging standards to ensure direct interchangeability in circuit applications.

Substiute Parts

RMC1/16K5900FTP

Kamaya Inc.In Stock: 900RMC1/16K5900FTP Datasheet

Current PartRFQ

ERJ-3EKF5900V

Panasonic Electronic ComponentsIn Stock: 45484ERJ-3EKF5900V Datasheet

DirectRFQ

RC0603FR-07590RL

YAGEOIn Stock: 6547RC0603FR-07590RL Datasheet

DirectRFQ

RMCF0603FT590R

Stackpole Electronics IncIn Stock: 17258RMCF0603FT590R Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the RMC1/16K5900FTP are qualified based on the following criteria:

Electrical Parameters (Critical):

• Resistance value: 590 Ohms
• Tolerance: ±1%
• Power rating: 0.1W (1/10W)
• Temperature coefficient: ±100ppm/°C
• Operating temperature range: -55°C ~ 155°C

Mechanical Parameters (Critical):

• Package type: 0603 (1608 Metric)
• Number of terminations: 2
• Composition: Thick Film

Environmental & Compliance Parameters:

• Moisture Sensitivity Level: 1 (Unlimited)
• Packaging: Tape & Reel (TR)

All identified substitute parts meet or exceed these parameters. Substitutes are grouped by manufacturer and feature set while maintaining full electrical and mechanical compatibility.

Parameter Comparison

Engineering Selection Recommendations

All substitute parts listed are Active product status components with full electrical and mechanical compatibility to the RMC1/16K5900FTP.

ERJ-3EKF5900V (Panasonic Electronic Components): This substitute includes Automotive AEC-Q200 qualification and ROHS3 compliance. Selection is appropriate for applications requiring automotive-grade reliability standards.

RC0603FR-07590RL (YAGEO): This substitute features moisture-resistant construction and ROHS3 compliance. Selection is appropriate for general industrial applications with standard environmental requirements.

RMCF0603FT590R (Stackpole Electronics Inc): This substitute includes Automotive AEC-Q200 qualification and ROHS3 compliance. Selection is appropriate for automotive and high-reliability applications requiring AEC-Q200 certification.

All three substitutes maintain identical electrical performance, thermal characteristics, and package dimensions relative to the main part.

Frequently Asked Questions (FAQ)

Q: Can ERJ-3EKF5900V replace RMC1/16K5900FTP in all applications?

A: Yes. The ERJ-3EKF5900V matches all critical electrical parameters (590 Ohms ±1%, 0.1W, ±100ppm/°C, -55°C ~ 155°C) and mechanical specifications (0603 package, 2 terminations, Tape & Reel packaging). The AEC-Q200 automotive qualification is an additional feature that does not restrict use in non-automotive applications.

Q: What is the difference between RC0603FR-07590RL and the automotive-qualified substitutes?

A: RC0603FR-07590RL does not carry AEC-Q200 automotive qualification. However, it maintains identical electrical specifications and package dimensions. The moisture-resistant feature is a design enhancement. Selection depends on application requirements; automotive applications should specify AEC-Q200 qualified parts.

Q: Are there dimensional differences between substitute parts?

A: The RMC1/16K5900FTP, ERJ-3EKF5900V, and RC0603FR-07590RL all measure 0.063" L x 0.031" W (1.60mm x 0.80mm). The RMCF0603FT590R measures 0.061" L x 0.031" W (1.55mm x 0.80mm). All four parts fit the 0603 (1608 Metric) package standard with maximum seated height of 0.022" (0.55mm), ensuring PCB layout compatibility.

Q: Do all substitutes have the same moisture sensitivity rating?

A: Yes. All parts, including the main part and all substitutes, carry MSL 1 (Unlimited) rating, indicating no moisture sensitivity restrictions for storage or handling.

Q: Which substitute should be selected for cost optimization?

A: Selection based on cost requires current inventory and pricing data not provided in this reference. All substitutes are electrically and mechanically equivalent; procurement decisions should consider availability, lead time, and supplier pricing.