RMC1/16K2153FTP Equivalent & Substitute Parts

Part Overview

The RMC1/16K2153FTP is a 215 kOhms ±1% 0.1W thick film chip resistor manufactured by Kamaya Inc. in 0603 (1608 Metric) surface mount package format. This component is currently active in production with 1,076 pieces in stock. The part is supplied in Tape & Reel packaging suitable for automated assembly processes.

Substitute parts are necessary when the primary manufacturer part becomes unavailable, when alternative sourcing is required for supply chain optimization, or when specific certifications such as automotive qualification are mandated by application requirements.

Substiute Parts

RMC1/16K2153FTP

Kamaya Inc.In Stock: 1120RMC1/16K2153FTP Datasheet

Current PartRFQ

ERJ-3EKF2153V

Panasonic Electronic ComponentsIn Stock: 464389ERJ-3EKF2153V Datasheet

DirectRFQ

MCR03ERTF2153

Rohm SemiconductorIn Stock: 3123MCR03ERTF2153 Datasheet

DirectRFQ

RC0603FR-07215KL

YAGEOIn Stock: 1315RC0603FR-07215KL Datasheet

DirectRFQ

RMCF0603FT215K

Stackpole Electronics IncIn Stock: 38201RMCF0603FT215K Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the RMC1/16K2153FTP is determined by strict equivalence across the following parameters:

Critical Matching Parameters:

• Resistance value: 215 kOhms
• Tolerance: ±1%
• Power rating: 0.1W (1/10W)
• Package: 0603 (1608 Metric)
• Composition: Thick Film
• Temperature coefficient: ±100ppm/°C
• Operating temperature range: -55°C ~ 155°C
• Moisture sensitivity level: MSL 1

All substitute parts listed meet these electrical and mechanical specifications. Variations in secondary attributes such as manufacturer, series designation, packaging format (Tape & Reel versus Cut Tape), and optional certifications (AEC-Q200, RoHS3) do not affect functional equivalence but may influence selection based on application requirements and supply availability.

Parameter Comparison

Engineering Selection Recommendations

Primary Substitute (Active Status, High Inventory): RMCF0603FT215K (Stackpole Electronics Inc) is the preferred substitute. This part maintains active product status with 38,131 pieces in stock. It carries AEC-Q200 automotive qualification and RoHS3 compliance. Packaging is Tape & Reel format, matching the original part's supply configuration.

Secondary Substitute (Active Status, Automotive Qualified): ERJ-3EKF2153V (Panasonic Electronic Components) is an active alternative with 464,367 pieces available. This part includes AEC-Q200 automotive qualification and RoHS3 compliance. Tape & Reel packaging supports automated assembly processes.

Tertiary Substitute (Active Status, Moisture Resistant): RC0603FR-07215KL (YAGEO) is an active option with 1,300 pieces in stock. This part features moisture-resistant construction and RoHS3 compliance. Cut Tape & Digi-Reel packaging requires consideration for assembly line compatibility.

Not Recommended: MCR03ERTF2153 (Rohm Semiconductor) is discontinued at DiGi Electronics and should not be selected for new designs or long-term supply requirements, despite current inventory availability.

Frequently Asked Questions (FAQ)

Q: Can ERJ-3EKF2153V be used as a direct replacement for RMC1/16K2153FTP?

A: Yes. Both parts share identical electrical specifications: 215 kOhms ±1%, 0.1W power rating, 0603 package, thick film composition, ±100ppm/°C temperature coefficient, and -55°C ~ 155°C operating range. Both carry MSL 1 rating. The primary difference is manufacturer and optional AEC-Q200 certification on the Panasonic part.

Q: What is the difference between Tape & Reel and Cut Tape packaging?

A: Tape & Reel packaging supplies components on continuous carrier tape wound on reels, optimized for high-speed automated pick-and-place assembly. Cut Tape & Digi-Reel supplies components on cut tape segments or alternative reel formats. Both formats contain identical components; packaging selection depends on assembly equipment compatibility and volume requirements.

Q: Does the AEC-Q200 certification on RMCF0603FT215K and ERJ-3EKF2153V affect general-purpose applications?

A: No. AEC-Q200 is an automotive qualification standard. Parts with this certification meet automotive reliability requirements but function identically in non-automotive applications. The certification does not restrict use in general-purpose circuits.

Q: Why is MCR03ERTF2153 listed if it is discontinued?

A: MCR03ERTF2153 is documented as a known equivalent but is discontinued at DiGi Electronics. Current inventory exists but future availability is not assured. This part should not be selected for new designs or applications requiring long-term supply continuity.

Q: Are all substitute parts RoHS3 compliant?

A: The main part RMC1/16K2153FTP does not specify RoHS status. All listed substitute parts are RoHS3 compliant. This compliance does not affect electrical performance and is beneficial for applications subject to RoHS regulations.

Q: What is the significance of MSL 1 rating?

A: MSL 1 (Moisture Sensitivity Level 1) indicates unlimited shelf life without moisture control requirements. All parts in this comparison carry MSL 1, meaning they do not require special dry storage or baking procedures prior to assembly.

Q: Can physical dimensions vary between substitute parts?

A: Dimensions are standardized for 0603 package format. Length is 0.063" (1.60mm) and width is 0.031" (0.80mm) for all parts. RMCF0603FT215K shows 0.061" length, which falls within acceptable 0603 package tolerance. Maximum seated height is 0.022" (0.55mm) for all parts.