RMC1/16K2003FTP Equivalent & Substitute Parts

Part Overview

The RMC1/16K2003FTP is a 200 kOhms ±1% 0.1W thick film chip resistor in 0603 (1608 Metric) package manufactured by Kamaya Inc. This component is classified as Active product status with 1054 units in current inventory. The RMC series represents a standard passive component used in general-purpose electronic applications requiring precision resistive elements. Substitute parts are identified when original stock becomes unavailable, when alternative sourcing is required for supply chain optimization, or when design specifications permit equivalent electrical and mechanical characteristics.

Substiute Parts

RMC1/16K2003FTP

Kamaya Inc.In Stock: 1109RMC1/16K2003FTP Datasheet

Current PartRFQ

CRG0603F200K

TE Connectivity Passive ProductIn Stock: 876CRG0603F200K Datasheet

DirectRFQ

KTR03EZPF2003

Rohm SemiconductorIn Stock: 27094KTR03EZPF2003 Datasheet

DirectRFQ

RC0603FR-07200KL

YAGEOIn Stock: 9211RC0603FR-07200KL Datasheet

DirectRFQ

RMCF0603FT200K

Stackpole Electronics IncIn Stock: 546027RMCF0603FT200K Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the RMC1/16K2003FTP is determined by strict equivalence across the following critical parameters:

Electrical Parameters (Must Match Exactly):

• Resistance value: 200 kOhms
• Tolerance: ±1%
• Power rating: 0.1W (1/10W)
• Temperature coefficient: ±100ppm/°C
• Operating temperature range: -55°C to 155°C

Mechanical Parameters (Must Match Exactly):

• Package type: 0603 (1608 Metric)
• Number of terminations: 2
• Composition: Thick Film

Environmental & Compliance Parameters:

• Moisture Sensitivity Level: 1 (Unlimited)
• REACH Status: REACH Unaffected
• ECCN: EAR99
• HTSUS: 8533.21.0030

All four substitute parts listed (RMCF0603FT200K, KTR03EZPF2003, RC0603FR-07200KL, CRG0603F200K) meet these exact specifications and are therefore direct functional equivalents suitable for circuit-level substitution without design modification.

Parameter Comparison

Engineering Selection Recommendations

All four substitute parts are functionally equivalent to the RMC1/16K2003FTP based on electrical and mechanical parameter matching. Selection among substitutes should be based on the following factors:

RMCF0603FT200K (Stackpole Electronics Inc): This substitute carries AEC-Q200 automotive qualification and represents the highest inventory availability (545,966 units). Selection is appropriate for applications requiring automotive-grade reliability or when maximum supply continuity is prioritized.

KTR03EZPF2003 (Rohm Semiconductor): This substitute carries AEC-Q200 automotive qualification with high voltage capability designation. Inventory availability is substantial (26,989 units). Selection is appropriate for automotive applications or high-voltage circuit environments.

RC0603FR-07200KL (YAGEO): This substitute features moisture-resistant thick film composition and is available in Cut Tape and Digi-Reel packaging options (9,144 units). Selection is appropriate for applications requiring enhanced moisture protection or when alternative packaging formats are preferred.

CRG0603F200K (TE Connectivity Passive Product): This substitute is part of the Neohm series with standard thick film composition (866 units). Selection is appropriate when TE Connectivity supply chain integration is required.

All substitutes maintain REACH Unaffected status, EAR99 ECCN classification, and identical HTSUS coding (8533.21.0030), ensuring regulatory and compliance equivalence.

Frequently Asked Questions (FAQ)

Q: Can RMCF0603FT200K replace RMC1/16K2003FTP in any application?

A: Yes. RMCF0603FT200K meets all electrical and mechanical specifications of RMC1/16K2003FTP. The AEC-Q200 automotive qualification of RMCF0603FT200K is an additional feature that does not restrict its use in non-automotive applications.

Q: What is the difference between Tape & Reel and Cut Tape packaging?

A: Tape & Reel (TR) packaging is supplied on continuous carrier tape wound on reels, suitable for automated pick-and-place assembly. Cut Tape (CT) packaging is supplied as individual tape segments, suitable for manual assembly or lower-volume applications. RC0603FR-07200KL is available in both formats. Packaging selection depends on assembly process requirements, not electrical performance.

Q: Are all substitutes RoHS3 compliant?

A: RMCF0603FT200K, KTR03EZPF2003, RC0603FR-07200KL, and CRG0603F200K are all ROHS3 Compliant. RoHS3 compliance status is not specified for the original RMC1/16K2003FTP in the provided data.

Q: Do the automotive-qualified substitutes (RMCF0603FT200K and KTR03EZPF2003) cost more?

A: Cost information is not provided in the technical specifications. Pricing should be obtained directly from component distributors.

Q: Can I mix different substitute parts in the same circuit board assembly?

A: Yes. All substitute parts are electrically and mechanically equivalent. Mixed sourcing is permissible from a technical standpoint. However, manufacturing and supply chain considerations may favor single-source selection for consistency and traceability.

Q: What does MSL 1 (Unlimited) mean?

A: Moisture Sensitivity Level 1 indicates the component has unlimited shelf life under normal storage conditions and requires no special moisture-control handling during storage, transportation, or assembly preparation.

Q: Are dimensional tolerances identical across all parts?

A: All parts conform to 0603 (1608 Metric) package specifications. RMCF0603FT200K has a length dimension of 0.061" (1.55mm) while other parts specify 0.063" (1.60mm). Both dimensions fall within standard 0603 package tolerance ranges and are mechanically compatible with standard 0603 footprints.