RMC1/16K2001FTP Equivalent & Substitute Parts Reference

Part Overview

The RMC1/16K2001FTP is a 2 kOhms ±1% 0.1W thick film chip resistor manufactured by Kamaya Inc. in 0603 (1608 Metric) package format. This component is classified as Active product status with 1,068 pieces currently in stock. The RMC series represents a standard general-purpose resistor suitable for consumer and industrial electronic applications. Substitute parts are identified when original stock becomes unavailable, when supply chain constraints occur, or when design requirements necessitate alternative qualified sources meeting identical electrical and mechanical specifications.

Substiute Parts

RMC1/16K2001FTP

Kamaya Inc.In Stock: 1166RMC1/16K2001FTP Datasheet

Current PartRFQ

CRG0603F2K0

TE Connectivity Passive ProductIn Stock: 30724CRG0603F2K0 Datasheet

DirectRFQ

ERJ-3EKF2001V

Panasonic Electronic ComponentsIn Stock: 307492ERJ-3EKF2001V Datasheet

DirectRFQ

KTR03EZPF2001

Rohm SemiconductorIn Stock: 12427KTR03EZPF2001 Datasheet

DirectRFQ

RC0603FR-072KL

YAGEOIn Stock: 5164RC0603FR-072KL Datasheet

DirectRFQ

RC1608F202CS

Samsung Electro-MechanicsIn Stock: 1045RC1608F202CS Datasheet

DirectRFQ

RMCF0603FT2K00

Stackpole Electronics IncIn Stock: 1154403RMCF0603FT2K00 Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the RMC1/16K2001FTP is determined by strict equivalence across the following critical parameters:

Mandatory Matching Parameters:

• Resistance Value: 2 kOhms
• Tolerance: ±1%
• Power Rating: 0.1W (1/10W)
• Package / Case: 0603 (1608 Metric)
• Composition: Thick Film
• Temperature Coefficient: ±100ppm/°C
• Operating Temperature Range: -55°C ~ 155°C
• Moisture Sensitivity Level: 1 (Unlimited)
• Number of Terminations: 2

All identified substitute parts meet these mandatory parameters without exception. Substitute parts are grouped by manufacturer and series designation. Packaging format variations (Tape & Reel versus Cut Tape) do not affect electrical or mechanical compatibility and represent logistics-level differences only. Physical dimension tolerances within the 0603 standard (minor variations such as 0.061" L versus 0.063" L) remain within acceptable assembly specifications for standard PCB pick-and-place equipment.

Parameter Comparison

Engineering Selection Recommendations

All substitute parts listed maintain Active product status and comply with ROHS3 standards. Selection among substitute parts should be based on the following criteria derived from provided specifications:

General-Purpose Applications (No Automotive Requirement): CRG0603F2K0 (TE Connectivity) and RC0603FR-072KL (YAGEO) are suitable. CRG0603F2K0 offers the highest inventory availability at 30,617 pieces. RC0603FR-072KL includes moisture-resistant features and is available in Cut Tape & Digi-Reel packaging format.

Automotive Applications (AEC-Q200 Requirement): ERJ-3EKF2001V (Panasonic), KTR03EZPF2001 (Rohm), and RMCF0603FT2K00 (Stackpole) are qualified. RMCF0603FT2K00 provides the largest inventory (1,154,320 pieces) and maintains AEC-Q200 automotive qualification. KTR03EZPF2001 includes high-voltage capability designation in addition to AEC-Q200 rating.

Moisture-Sensitive Environments: RC0603FR-072KL (YAGEO) and RC1608F202CS (Samsung) both specify moisture-resistant features. Both maintain MSL 1 rating.

All substitute parts are REACH Unaffected and classified under ECCN EAR99 with identical HTSUS code 8533.21.0030, ensuring regulatory and trade compliance equivalence.

Frequently Asked Questions (FAQ)

Q: Can CRG0603F2K0 be used as a direct replacement for RMC1/16K2001FTP?

A: Yes. CRG0603F2K0 meets all mandatory electrical and mechanical parameters: 2 kOhms ±1%, 0.1W power rating, 0603 package, ±100ppm/°C temperature coefficient, -55°C to 155°C operating range, and MSL 1 rating. Packaging format (Tape & Reel) is compatible with standard assembly equipment.

Q: What is the difference between general-purpose and automotive-qualified substitutes?

A: Automotive-qualified substitutes (ERJ-3EKF2001V, KTR03EZPF2001, RMCF0603FT2K00) carry AEC-Q200 certification, indicating compliance with automotive reliability and qualification standards. General-purpose substitutes (CRG0603F2K0, RC0603FR-072KL, RC1608F202CS) do not carry this designation. Selection depends on application requirements.

Q: Are there physical dimension differences between substitute parts?

A: Minor variations exist within 0603 standard tolerance. RMCF0603FT2K00 specifies 0.061" L versus the standard 0.063" L. Both dimensions remain within acceptable PCB assembly specifications for 0603 package footprints and do not require design modification.

Q: Does packaging format (Tape & Reel versus Cut Tape) affect compatibility?

A: No. Packaging format represents logistics and handling differences only. Electrical and mechanical specifications remain identical. Tape & Reel format suits high-volume automated assembly; Cut Tape format suits lower-volume or manual assembly operations.

Q: Which substitute offers the best inventory availability?

A: RMCF0603FT2K00 (Stackpole Electronics) provides the highest inventory at 1,154,320 pieces. This part also qualifies for automotive applications under AEC-Q200 standard.

Q: Are all substitutes RoHS3 compliant?

A: Yes. All listed substitute parts carry RoHS3 Compliant status, ensuring compliance with European Union Restriction of Hazardous Substances regulations.

Q: Can KTR03EZPF2001 be used in non-automotive applications?

A: Yes. KTR03EZPF2001 meets all general electrical and mechanical specifications for the 2 kOhms ±1% 0.1W 0603 resistor. The AEC-Q200 automotive qualification and high-voltage feature designation represent additional capabilities that do not restrict use in general-purpose applications.