RMC1/16K1963FTP Equivalent & Substitute Parts

Part Overview

The RMC1/16K1963FTP is a 196 kOhms ±1% thick film chip resistor manufactured by Kamaya Inc., rated at 0.1W (1/10W) power dissipation in a 0603 (1608 Metric) surface mount package. This component is classified as Active product status with unlimited moisture sensitivity level (MSL 1) and full REACH compliance. Substitute parts are identified to provide design flexibility, supply chain alternatives, and compatibility with specific application requirements such as automotive qualification or enhanced moisture resistance.

Substiute Parts

RMC1/16K1963FTP

Kamaya Inc.In Stock: 918RMC1/16K1963FTP Datasheet

Current PartRFQ

ERJ-3EKF1963V

Panasonic Electronic ComponentsIn Stock: 97751ERJ-3EKF1963V Datasheet

DirectRFQ

MCR03ERTF1963

Rohm SemiconductorIn Stock: 2401MCR03ERTF1963 Datasheet

DirectRFQ

RC0603FR-07196KL

YAGEOIn Stock: 509136RC0603FR-07196KL Datasheet

DirectRFQ

RMCF0603FT196K

Stackpole Electronics IncIn Stock: 225612RMCF0603FT196K Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the RMC1/16K1963FTP is determined by strict equivalence across the following parameters: resistance value (196 kOhms), tolerance (±1%), power rating (0.1W), package type (0603), temperature coefficient (±100ppm/°C), operating temperature range (-55°C to 155°C), and composition (thick film). All identified substitute parts meet these core electrical and mechanical specifications. Variations in packaging format (Tape & Reel versus Cut Tape), manufacturer certifications (AEC-Q200 automotive qualification), and feature enhancements (moisture resistance) do not affect functional interchangeability but may influence selection based on application context and supply availability.

Parameter Comparison

Engineering Selection Recommendations

Primary Substitutes (Active Status, Full Availability):

ERJ-3EKF1963V (Panasonic) and RMCF0603FT196K (Stackpole Electronics Inc) are recommended as primary substitutes. Both maintain Active product status, carry AEC-Q200 automotive qualification, and demonstrate high inventory availability (97,700 and 225,563 units respectively). These parts are suitable for applications requiring automotive-grade reliability and long-term supply assurance.

RC0603FR-07196KL (YAGEO) is recommended for applications requiring enhanced moisture resistance. This part maintains Active status with the largest inventory (509,124 units), providing superior supply chain stability and cost efficiency for high-volume production.

Secondary Substitute (Limited Availability):

MCR03ERTF1963 (Rohm Semiconductor) is classified as Discontinued at DiGi Electronics with limited inventory (2,307 units). This part meets all electrical and mechanical specifications but should be selected only when supply from primary alternatives is constrained and existing inventory is confirmed available.

All substitute parts comply with ROHS3 and REACH requirements, matching the environmental and regulatory compliance profile of the original RMC1/16K1963FTP.

Frequently Asked Questions (FAQ)

Q: Can ERJ-3EKF1963V replace RMC1/16K1963FTP in non-automotive applications?

A: Yes. ERJ-3EKF1963V meets all core electrical specifications (196 kOhms ±1%, 0.1W, 0603 package, ±100ppm/°C, -55°C to 155°C). AEC-Q200 automotive qualification is an additional feature that does not restrict use in general-purpose applications.

Q: What is the difference between Tape & Reel and Cut Tape packaging?

A: Tape & Reel (TR) packaging is supplied on continuous carrier tape for automated pick-and-place assembly. Cut Tape (CT) packaging is pre-cut into smaller quantities. Both formats contain identical components; packaging selection depends on production volume and assembly equipment compatibility.

Q: Is RC0603FR-07196KL suitable for high-humidity environments?

A: RC0603FR-07196KL includes moisture-resistant construction as a specified feature. All substitute parts maintain MSL 1 (Unlimited) rating, indicating no moisture sensitivity restrictions. Moisture-resistant designation on RC0603FR-07196KL provides additional protection in high-humidity applications.

Q: Why is MCR03ERTF1963 marked as discontinued?

A: MCR03ERTF1963 is discontinued at DiGi Electronics but remains functionally equivalent. Discontinuation reflects supplier inventory decisions, not component defect or specification change. Existing stock (2,307 units) remains available; however, long-term supply cannot be assured.

Q: Are all substitute parts ROHS3 compliant?

A: Yes. All identified substitute parts carry ROHS3 Compliant status, matching the environmental compliance of RMC1/16K1963FTP. REACH Unaffected status is consistent across all parts.

Q: Can I mix different manufacturers in the same circuit board assembly?

A: Yes. All substitute parts meet identical electrical and mechanical specifications. Mixed-manufacturer assembly is permissible from a functional standpoint. Procurement and quality assurance procedures should document manufacturer sourcing for traceability.