RMC1/16K1503FTP Equivalent & Substitute Parts

Part Overview

The RMC1/16K1503FTP is a 150 kOhms ±1% 0.1W thick film chip resistor manufactured by Kamaya Inc. in 0603 (1608 Metric) package format. This component is classified as Active product status and is supplied in Tape & Reel packaging. Equivalent and substitute parts are identified when component availability is limited, supply chain disruptions occur, or design flexibility permits alternative sourcing from qualified manufacturers while maintaining electrical and mechanical compatibility.

Substiute Parts

RMC1/16K1503FTP

Kamaya Inc.In Stock: 776RMC1/16K1503FTP Datasheet

Current PartRFQ

CRG0603F150K

TE Connectivity Passive ProductIn Stock: 19153CRG0603F150K Datasheet

DirectRFQ

ERJ-3EKF1503V

Panasonic Electronic ComponentsIn Stock: 182193ERJ-3EKF1503V Datasheet

DirectRFQ

KTR03EZPF1503

Rohm SemiconductorIn Stock: 825KTR03EZPF1503 Datasheet

DirectRFQ

RC0603FR-07150KL

YAGEOIn Stock: 176279RC0603FR-07150KL Datasheet

DirectRFQ

RMCF0603FG150K

Stackpole Electronics IncIn Stock: 140866RMCF0603FG150K Datasheet

DirectRFQ

RMCF0603FT150K

Stackpole Electronics IncIn Stock: 297729RMCF0603FT150K Datasheet

DirectRFQ

CRCW0603150KFKEA

Vishay DaleIn Stock: 149697CRCW0603150KFKEA Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the RMC1/16K1503FTP is determined by strict equivalence across the following critical parameters:

Mandatory Matching Parameters:

• Resistance value: 150 kOhms
• Tolerance: ±1%
• Power rating: 0.1W (1/10W)
• Package: 0603 (1608 Metric)
• Composition: Thick Film
• Temperature coefficient: ±100ppm/°C
• Operating temperature range: -55°C ~ 155°C
• Moisture sensitivity level: 1 (Unlimited)
• Termination count: 2

All substitute parts listed below meet these mandatory parameters. Substitute parts are further categorized as Direct Manufacturer equivalents or Similar parts based on dimensional and compliance alignment with the main part specification.

Parameter Comparison

Engineering Selection Recommendations

Direct Manufacturer Equivalents (Highest Compatibility):

CRG0603F150K (TE Connectivity), ERJ-3EKF1503V (Panasonic), KTR03EZPF1503 (Rohm), RC0603FR-07150KL (YAGEO), RMCF0603FG150K (Stackpole), RMCF0603FT150K (Stackpole), and CRCW0603150KFKEA (Vishay Dale) are all direct electrical and mechanical equivalents to the RMC1/16K1503FTP. All substitute parts are Active product status with ROHS3 compliance or REACH Unaffected status.

Automotive-Qualified Options:

ERJ-3EKF1503V, KTR03EZPF1503, RMCF0603FG150K, RMCF0603FT150K, and CRCW0603150KFKEA carry AEC-Q200 automotive qualification. These parts are suitable for applications requiring automotive-grade reliability and traceability.

Packaging Considerations:

Tape & Reel packaging is available from CRG0603F150K, KTR03EZPF1503, and RMCF0603FT150K, matching the original RMC1/16K1503FTP packaging format. Cut Tape & Digi-Reel packaging is available from ERJ-3EKF1503V, RC0603FR-07150KL, and CRCW0603150KFKEA. RMCF0603FG150K is supplied in Cut Tape format.

High-Voltage Feature:

KTR03EZPF1503 includes high-voltage thick film construction in addition to AEC-Q200 qualification.

Moisture-Resistant Feature:

RC0603FR-07150KL includes moisture-resistant thick film construction.

Frequently Asked Questions (FAQ)

Q: Can I substitute RMC1/16K1503FTP with any of the listed parts without circuit redesign?

A: Yes. All listed substitute parts meet identical electrical specifications (150 kOhms ±1%, 0.1W, ±100ppm/°C, -55°C ~ 155°C) and mechanical package requirements (0603 / 1608 Metric, 2 terminations). No circuit redesign is required for direct substitution.

Q: What is the difference between Direct Manufacturer equivalents and Similar parts?

A: Direct Manufacturer equivalents meet all electrical and mechanical parameters with full dimensional alignment. Similar parts (such as CRCW0603150KFKEA) meet all electrical specifications and package classification but may have minor dimensional variations within tolerance (height or length ±0.002" to 0.004"). These variations do not affect PCB assembly or electrical performance.

Q: Are all substitute parts RoHS compliant?

A: All substitute parts listed are either ROHS3 Compliant or REACH Unaffected. The original RMC1/16K1503FTP is REACH Unaffected. Verify compliance requirements for your specific application and region.

Q: Which substitute parts are suitable for automotive applications?

A: ERJ-3EKF1503V, KTR03EZPF1503, RMCF0603FG150K, RMCF0603FT150K, and CRCW0603150KFKEA all carry AEC-Q200 automotive qualification. These parts meet automotive reliability and traceability standards.

Q: Does packaging type affect electrical performance?

A: No. Tape & Reel, Cut Tape, and Digi-Reel packaging formats do not affect electrical performance. Packaging selection is based on assembly process requirements and inventory management. Verify your assembly equipment compatibility with the selected packaging format.

Q: What is Moisture Sensitivity Level (MSL) 1?

A: MSL 1 indicates unlimited shelf life with no moisture sensitivity restrictions. All parts listed, including the main part RMC1/16K1503FTP, have MSL 1 rating and require no special moisture control during storage or handling.

Q: Can I mix different manufacturers' parts in the same production batch?

A: Yes. All substitute parts meet identical electrical and mechanical specifications. Mixing manufacturers is acceptable from a technical standpoint. Verify procurement, traceability, and quality documentation requirements for your application.

Q: What does ±100ppm/°C temperature coefficient mean?

A: Temperature coefficient specifies resistance change per degree Celsius. ±100ppm/°C means the resistance value changes by a maximum of 100 parts per million for each degree Celsius change in operating temperature. All listed parts have identical temperature coefficient, ensuring equivalent thermal performance.