RMC1/16K1102FTP Equivalent & Substitute Parts

Part Overview

The RMC1/16K1102FTP is an 11 kOhms ±1% 0.1W thick film chip resistor manufactured by Kamaya Inc. in 0603 (1608 Metric) package format. This component is classified as Active product status and is supplied in Tape & Reel packaging. The RMC series represents a standard general-purpose resistor suitable for consumer and industrial electronics applications. Substitute parts are identified when original inventory becomes unavailable, when supply chain constraints occur, or when design flexibility permits component interchangeability within specified electrical and mechanical parameters.

Substiute Parts

RMC1/16K1102FTP

Kamaya Inc.In Stock: 768RMC1/16K1102FTP Datasheet

Current PartRFQ

CRG0603F11K

TE Connectivity Passive ProductIn Stock: 919CRG0603F11K Datasheet

DirectRFQ

ERJ-3EKF1102V

Panasonic Electronic ComponentsIn Stock: 449046ERJ-3EKF1102V Datasheet

DirectRFQ

KTR03EZPF1102

Rohm SemiconductorIn Stock: 8986KTR03EZPF1102 Datasheet

DirectRFQ

RC0603FR-0711KL

YAGEOIn Stock: 5000334RC0603FR-0711KL Datasheet

DirectRFQ

RMCF0603FT11K0

Stackpole Electronics IncIn Stock: 384249RMCF0603FT11K0 Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the RMC1/16K1102FTP is determined by strict equivalence across the following critical parameters:

Electrical Parameters (Must Match Exactly):

• Resistance value: 11 kOhms
• Tolerance: ±1%
• Power rating: 0.1W (1/10W)
• Temperature coefficient: ±100ppm/°C
• Operating temperature range: -55°C ~ 155°C

Mechanical Parameters (Must Match Exactly):

• Package / Case: 0603 (1608 Metric)
• Number of terminations: 2
• Composition: Thick Film

Compliance Parameters (Must Match or Exceed):

• Moisture Sensitivity Level: 1 (Unlimited)
• REACH Status: REACH Unaffected
• ECCN: EAR99
• HTSUS: 8533.21.0030

All five substitute parts listed meet these criteria. Variations in packaging format (Tape & Reel versus Cut Tape), manufacturer-specific features (Automotive AEC-Q200, High Voltage, Moisture Resistant), and minor dimensional tolerances do not affect substitution eligibility when the core electrical and mechanical specifications remain identical.

Parameter Comparison

Engineering Selection Recommendations

All five substitute parts are functionally equivalent to the RMC1/16K1102FTP based on electrical and mechanical parameter matching. Selection among these alternatives should be based on the following criteria:

General-Purpose Applications: The CRG0603F11K (TE Connectivity Neohm series) and RC0603FR-0711KL (YAGEO RC_L series) are suitable for standard consumer and industrial applications without specialized requirements.

Automotive Applications: The RMCF0603FT11K0 (Stackpole Electronics), ERJ-3EKF1102V (Panasonic), and KTR03EZPF1102 (Rohm) carry Automotive AEC-Q200 certification, indicating qualification for automotive-grade reliability and environmental stress testing. These parts are appropriate for automotive electronics, industrial control systems, and applications requiring enhanced reliability standards.

High-Voltage Applications: The KTR03EZPF1102 (Rohm Semiconductor) is specified with High Voltage features in addition to AEC-Q200 certification, making it suitable for applications with elevated voltage stress requirements.

Moisture-Resistant Applications: The RC0603FR-0711KL (YAGEO) is specified with Moisture Resistant features, appropriate for applications exposed to humid environments or moisture ingress risk.

RoHS Compliance: All substitute parts except the main part are explicitly ROHS3 Compliant. Applications requiring RoHS certification should select from the substitute list.

Packaging Format: The RMCF0603FT11K0, CRG0603F11K, ERJ-3EKF1102V, and KTR03EZPF1102 are supplied in Tape & Reel format. The RC0603FR-0711KL is supplied in Cut Tape & Digi-Reel format. Selection depends on assembly equipment compatibility and procurement requirements.

Frequently Asked Questions (FAQ)

Q: Can RMCF0603FT11K0 replace RMC1/16K1102FTP in any application?

A: Yes. The RMCF0603FT11K0 meets all electrical and mechanical specifications of the RMC1/16K1102FTP. The primary difference is Automotive AEC-Q200 certification on the Stackpole part, which represents an additional qualification level. This substitution is valid for both general-purpose and automotive applications.

Q: What is the difference between Tape & Reel and Cut Tape packaging?

A: Tape & Reel packaging supplies components on continuous carrier tape wound on reels, suitable for high-volume automated assembly. Cut Tape & Digi-Reel packaging supplies components on cut tape segments, suitable for lower-volume assembly or manual handling. Both formats contain identical components; the difference is in supply format and assembly equipment compatibility.

Q: Are all substitute parts ROHS3 Compliant?

A: All five substitute parts are explicitly ROHS3 Compliant. The main part RMC1/16K1102FTP does not specify RoHS status in the provided data. Applications requiring RoHS certification should use substitute parts.

Q: Can I use ERJ-3EKF1102V in place of RC0603FR-0711KL?

A: Yes. Both parts are electrically and mechanically equivalent. The ERJ-3EKF1102V (Panasonic) carries Automotive AEC-Q200 certification, while the RC0603FR-0711KL (YAGEO) is specified with Moisture Resistant features. Selection depends on application requirements: choose Panasonic for automotive applications, YAGEO for moisture-sensitive environments.

Q: What does ±100ppm/°C temperature coefficient mean?

A: Temperature coefficient specifies the resistance change per degree Celsius across the operating temperature range. ±100ppm/°C means the resistance value can change by up to 100 parts per million for each degree Celsius of temperature change. All listed parts share this specification, ensuring thermal stability equivalence.

Q: Are dimensional differences between parts significant?

A: The RMC1/16K1102FTP and RMCF0603FT11K0 show minor length differences (0.063" versus 0.061"). Both conform to 0603 (1608 Metric) package specification and have identical height (0.022" max). These dimensional variations are within standard package tolerances and do not affect PCB layout or assembly compatibility.

Q: Can I mix different manufacturers' parts in the same assembly?

A: Yes. All substitute parts meet identical electrical and mechanical specifications. Mixed-manufacturer assemblies are acceptable from a functional standpoint. However, procurement and quality control procedures should account for different manufacturer part numbers and certifications.

Q: What does Moisture Sensitivity Level 1 (Unlimited) mean?

A: MSL 1 indicates the component has unlimited shelf life without moisture bake-out requirements. This is the least restrictive moisture sensitivity classification, meaning the part can be stored and handled without special humidity controls or pre-reflow baking procedures.