RMC1/10K9101FTP Equivalent & Substitute Parts

Part Overview

The RMC1/10K9101FTP is a 9.1 kOhms ±1% thick film chip resistor manufactured by Kamaya Inc. in 0805 (2012 Metric) package format with 0.125W power rating. This component is classified as Active product status with 918 pieces currently in stock. Equivalent and substitute parts are necessary when the primary part becomes unavailable, when alternative packaging formats are required, or when specific compliance certifications (such as AEC-Q200 automotive qualification) are mandated by application requirements.

Substiute Parts

RMC1/10K9101FTP

Kamaya Inc.In Stock: 994RMC1/10K9101FTP Datasheet

Current PartRFQ

CRG0805F9K1

TE Connectivity Passive ProductIn Stock: 968CRG0805F9K1 Datasheet

DirectRFQ

ERJ-6ENF9101V

Panasonic Electronic ComponentsIn Stock: 43353ERJ-6ENF9101V Datasheet

DirectRFQ

KTR10EZPF9101

Rohm SemiconductorIn Stock: 1730KTR10EZPF9101 Datasheet

DirectRFQ

MCR10ERTF9101

Rohm SemiconductorIn Stock: 727MCR10ERTF9101 Datasheet

DirectRFQ

RC0805FR-079K1L

YAGEOIn Stock: 5985RC0805FR-079K1L Datasheet

DirectRFQ

RMCF0805FT9K10

Stackpole Electronics IncIn Stock: 52134RMCF0805FT9K10 Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the RMC1/10K9101FTP is determined by strict equivalence across the following parameters:

Critical Parameters (Must Match Exactly):

• Resistance value: 9.1 kOhms
• Tolerance: ±1%
• Power rating: 0.125W (1/8W)
• Package: 0805 (2012 Metric)
• Composition: Thick Film
• Temperature coefficient: ±100ppm/°C
• Operating temperature range: -55°C ~ 155°C
• Moisture sensitivity level: 1 (Unlimited)
• Number of terminations: 2

All substitute parts listed below meet these exact specifications. Variations in packaging format (Tape & Reel versus Cut Tape), manufacturer, series designation, and optional certifications (such as AEC-Q200 automotive qualification) do not affect functional equivalence for standard applications. Selection among substitutes depends on availability, packaging preference, and application-specific compliance requirements.

Parameter Comparison

Engineering Selection Recommendations

For Standard Industrial Applications: Select from CRG0805F9K1 (TE Connectivity), RC0805FR-079K1L (YAGEO), or RMCF0805FT9K10 (Stackpole Electronics). All three are Active status with high inventory availability. CRG0805F9K1 and RMCF0805FT9K10 are supplied in Tape & Reel format matching the original part packaging. RC0805FR-079K1L offers the highest inventory level (5880 pieces) and includes moisture-resistant composition.

For Automotive Applications (AEC-Q200 Required): Select ERJ-6ENF9101V (Panasonic), KTR10EZPF9101 (Rohm), or RMCF0805FT9K10 (Stackpole Electronics). All three carry AEC-Q200 automotive qualification. ERJ-6ENF9101V provides the largest inventory (43276 pieces) and is supplied in Cut Tape & Digi-Reel format. RMCF0805FT9K10 offers the highest total inventory among automotive-qualified options (52082 pieces) and is supplied in Tape & Reel format.

For Tape & Reel Packaging Preference: CRG0805F9K1, KTR10EZPF9101, RMCF0805FT9K10, and the original RMC1/10K9101FTP are all available in Tape & Reel format.

For Cut Tape & Digi-Reel Packaging Preference: ERJ-6ENF9101V, MCR10ERTF9101, and RC0805FR-079K1L are supplied in Cut Tape & Digi-Reel format.

Avoid MCR10ERTF9101 for new designs due to Discontinued at DiGi Electronics product status, although limited inventory (677 pieces) remains available.

Frequently Asked Questions (FAQ)

Q: Can I substitute any of these parts directly into a circuit designed for RMC1/10K9101FTP?

A: Yes. All listed substitute parts meet identical electrical specifications: 9.1 kOhms ±1% resistance, 0.125W power rating, ±100ppm/°C temperature coefficient, and -55°C to 155°C operating range. All are packaged in 0805 (2012 Metric) format with two terminations. Direct substitution is functionally equivalent for standard applications.

Q: What is the difference between Tape & Reel and Cut Tape & Digi-Reel packaging?

A: Tape & Reel packaging supplies components on continuous tape wound on reels, suitable for high-volume automated assembly. Cut Tape & Digi-Reel packaging supplies components on cut tape segments or Digi-Reel format, suitable for lower-volume or mixed-component assembly. Both formats contain identical components; the difference is in handling and assembly process compatibility.

Q: Why do some substitute parts have AEC-Q200 certification while others do not?

A: AEC-Q200 is an automotive industry qualification standard. ERJ-6ENF9101V, KTR10EZPF9101, and RMCF0805FT9K10 are qualified to this standard. The original RMC1/10K9101FTP, CRG0805F9K1, MCR10ERTF9101, and RC0805FR-079K1L do not carry this certification. Use AEC-Q200 qualified parts only when automotive application requirements mandate this certification.

Q: Is MCR10ERTF9101 still available for purchase?

A: MCR10ERTF9101 is listed as Discontinued at DiGi Electronics. Limited inventory (677 pieces) remains available from current stock. For new designs or long-term supply requirements, select from Active status parts: CRG0805F9K1, ERJ-6ENF9101V, KTR10EZPF9101, RC0805FR-079K1L, or RMCF0805FT9K10.

Q: Which substitute part has the highest inventory availability?

A: RMCF0805FT9K10 (Stackpole Electronics) has the highest inventory at 52082 pieces. ERJ-6ENF9101V (Panasonic) is the second highest at 43276 pieces. Both are suitable for immediate procurement.

Q: Are all substitute parts RoHS3 compliant?

A: All substitute parts listed carry RoHS3 compliance status. The original RMC1/10K9101FTP does not specify RoHS status in the provided data.

Q: Can I use RC0805FR-079K1L as a substitute if moisture resistance is important?

A: Yes. RC0805FR-079K1L includes moisture-resistant composition as a specified feature. This part meets all electrical equivalence criteria and adds moisture resistance capability.