RMC1/10K7683FTP Equivalent & Substitute Parts

Part Overview

The RMC1/10K7683FTP is a 768 kOhms ±1% 0.125W thick film chip resistor manufactured by Kamaya Inc. in 0805 (2012 Metric) package format. This component is classified as Active product status with unlimited moisture sensitivity rating (MSL 1). The part is supplied in Tape & Reel packaging suitable for automated assembly processes. Equivalent and substitute parts are identified based on matching electrical specifications, mechanical dimensions, and package compatibility to support procurement flexibility and supply chain continuity.

Substiute Parts

RMC1/10K7683FTP

Kamaya Inc.In Stock: 1152RMC1/10K7683FTP Datasheet

Current PartRFQ

ERJ-6ENF7683V

Panasonic Electronic ComponentsIn Stock: 55465ERJ-6ENF7683V Datasheet

DirectRFQ

RC0805FR-07768KL

YAGEOIn Stock: 5558RC0805FR-07768KL Datasheet

DirectRFQ

RMCF0805FT768K

Stackpole Electronics IncIn Stock: 2163RMCF0805FT768K Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the RMC1/10K7683FTP are qualified based on the following criteria:

Electrical Parameters (Mandatory Match):

• Resistance value: 768 kOhms
• Tolerance: ±1%
• Power rating: 0.125W (1/8W)
• Temperature coefficient: ±100ppm/°C
• Operating temperature range: -55°C ~ 155°C

Mechanical Parameters (Mandatory Match):

• Package / Case: 0805 (2012 Metric)
• Physical dimensions: 0.079" L x 0.049" W (2.00mm x 1.25mm)
• Number of terminations: 2

Material & Construction (Mandatory Match):

• Composition: Thick Film
• Moisture Sensitivity Level: 1 (Unlimited)

Compliance & Regulatory (Allowable Variation):

• REACH Status: REACH Unaffected (all parts)
• ECCN: EAR99 (all parts)
• HTSUS: 8533.21.0030 (all parts)
• RoHS Status: ROHS3 Compliant (substitute parts)

All identified substitute parts meet or exceed the electrical, mechanical, and environmental specifications of the main part. Height variation within seated maximum dimensions is acceptable.

Parameter Comparison

Engineering Selection Recommendations

All substitute parts listed are functionally equivalent to the RMC1/10K7683FTP based on matching electrical and mechanical specifications. Selection among equivalent parts should be based on the following factors:

Automotive Applications: ERJ-6ENF7683V (Panasonic) and RMCF0805FT768K (Stackpole) both carry AEC-Q200 automotive qualification ratings. These parts are suitable for applications requiring automotive-grade reliability and temperature cycling performance.

Moisture Resistance: RC0805FR-07768KL (YAGEO) is specified with moisture-resistant construction, providing enhanced performance in high-humidity environments while maintaining MSL 1 rating.

RoHS Compliance: All substitute parts are ROHS3 compliant. The main part RMC1/10K7683FTP does not specify RoHS status; substitute parts provide documented compliance for applications requiring RoHS certification.

Inventory Availability: ERJ-6ENF7683V (Panasonic) offers the highest inventory level at 55,407 pieces. RC0805FR-07768KL (YAGEO) provides 5,449 pieces. RMCF0805FT768K (Stackpole) provides 2,086 pieces. RMC1/10K7683FTP (Kamaya) provides 1,075 pieces.

Height Considerations: RC0805FR-07768KL (YAGEO) has the lowest seated height at 0.024" (0.60mm), suitable for space-constrained PCB layouts. All parts remain within standard 0805 package specifications.

Frequently Asked Questions (FAQ)

Q: Can ERJ-6ENF7683V replace RMC1/10K7683FTP in non-automotive applications?

A: Yes. ERJ-6ENF7683V meets all electrical and mechanical specifications required for the RMC1/10K7683FTP. The AEC-Q200 automotive qualification is an additional feature that does not restrict use in non-automotive circuits. The part is fully compatible.

Q: What is the significance of the height difference between RC0805FR-07768KL (0.024") and ERJ-6ENF7683V (0.028")?

A: Both heights fall within standard 0805 package tolerances and are acceptable for PCB assembly. The 0.004" (0.10mm) difference is negligible for most applications. Selection should be based on specific PCB clearance requirements if space constraints exist.

Q: Are all substitute parts available in Tape & Reel packaging?

A: Yes. All substitute parts listed are supplied in Tape & Reel (TR) packaging, matching the packaging format of the main part RMC1/10K7683FTP.

Q: Does moisture-resistant construction in RC0805FR-07768KL provide superior performance compared to standard thick film?

A: RC0805FR-07768KL is specified with moisture-resistant features. However, all parts including RMC1/10K7683FTP carry MSL 1 (Unlimited) rating, indicating equivalent moisture sensitivity performance. The moisture-resistant designation in RC0805FR-07768KL represents enhanced construction but does not change the MSL classification.

Q: Can these parts be used interchangeably on the same PCB assembly?

A: Yes. All substitute parts are mechanically and electrically equivalent. They share identical 0805 package dimensions, termination count, and electrical specifications. PCB footprints designed for RMC1/10K7683FTP accommodate all listed substitute parts without modification.

Q: Which substitute part is recommended for high-reliability applications?

A: RMCF0805FT768K (Stackpole) and ERJ-6ENF7683V (Panasonic) both carry AEC-Q200 automotive qualification, indicating compliance with automotive reliability and temperature cycling standards. Either part is suitable for high-reliability applications.

Q: What is the temperature coefficient significance for circuit design?

A: All parts including RMC1/10K7683FTP and substitutes share ±100ppm/°C temperature coefficient. This specification indicates resistance value will change by approximately 0.01% per degree Celsius within the -55°C to 155°C operating range. This parameter is identical across all parts and does not affect substitution decisions.