RMC1/10K7501FTP Equivalent & Substitute Parts

Part Overview

The RMC1/10K7501FTP is a 7.5 kOhms ±1% 0.125W thick film chip resistor manufactured by Kamaya Inc. in 0805 (2012 Metric) surface mount package format. This component is classified as Active product status with full inventory availability of 1084 pieces in new original condition. The RMC series resistor is designed for general-purpose applications requiring precision resistance values with tight tolerance specifications. Substitute parts are identified when original stock becomes unavailable, when supply chain constraints occur, or when design requirements necessitate alternative qualified sources meeting identical electrical and mechanical specifications.

Substiute Parts

RMC1/10K7501FTP

Kamaya Inc.In Stock: 1188RMC1/10K7501FTP Datasheet

Current PartRFQ

CRG0805F7K5

TE Connectivity Passive ProductIn Stock: 19154CRG0805F7K5 Datasheet

DirectRFQ

ERJ-6ENF7501V

Panasonic Electronic ComponentsIn Stock: 63918ERJ-6ENF7501V Datasheet

DirectRFQ

KTR10EZPF7501

Rohm SemiconductorIn Stock: 10181KTR10EZPF7501 Datasheet

DirectRFQ

RC0805FR-077K5L

YAGEOIn Stock: 411453RC0805FR-077K5L Datasheet

DirectRFQ

RMCF0805FG7K50

Stackpole Electronics IncIn Stock: 10617RMCF0805FG7K50 Datasheet

DirectRFQ

RMCF0805FT7K50

Stackpole Electronics IncIn Stock: 793160RMCF0805FT7K50 Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the RMC1/10K7501FTP are qualified based on strict electrical and mechanical parameter matching. All identified substitutes maintain identical specifications across the following critical parameters:

Electrical Parameters:

• Resistance value: 7.5 kOhms
• Tolerance: ±1%
• Power rating: 0.125W (1/8W)
• Temperature coefficient: ±100ppm/°C
• Operating temperature range: -55°C ~ 155°C

Mechanical Parameters:

• Package type: 0805 (2012 Metric)
• Physical dimensions: 0.079" L x 0.049" W (2.00mm x 1.25mm)
• Number of terminations: 2
• Composition: Thick Film

Environmental & Compliance Parameters:

• Moisture Sensitivity Level: 1 (Unlimited)
• Packaging: Tape & Reel (TR)
• REACH Status: REACH Unaffected
• ECCN: EAR99
• HTSUS: 8533.21.0030

Substitutes are grouped by manufacturer and may include additional features such as automotive AEC-Q200 qualification or moisture-resistant construction. These additional features do not prevent substitution but indicate enhanced performance characteristics available in certain alternatives.

Parameter Comparison

Engineering Selection Recommendations

All substitute parts listed maintain full electrical and mechanical compatibility with the RMC1/10K7501FTP. Selection among alternatives is determined by application requirements and supply availability:

Standard Applications (Non-Automotive): CRG0805F7K5 from TE Connectivity Passive Product and RC0805FR-077K5L from YAGEO provide direct substitution without additional qualification requirements. RC0805FR-077K5L includes moisture-resistant construction suitable for humid environments. Both maintain identical electrical performance and package dimensions.

Automotive Applications (AEC-Q200 Required): ERJ-6ENF7501V (Panasonic), KTR10EZPF7501 (Rohm Semiconductor), RMCF0805FG7K50, and RMCF0805FT7K50 (Stackpole Electronics Inc) carry AEC-Q200 automotive qualification. KTR10EZPF7501 includes high voltage capability designation. RMCF0805FT7K50 offers the highest inventory availability at 793133 pieces.

Supply Chain Considerations: RC0805FR-077K5L maintains the largest inventory stock at 411349 pieces, providing optimal supply security. RMCF0805FT7K50 offers the second-highest availability. All substitute parts are classified as Active product status with ROHS3 compliance and REACH Unaffected designation.

Physical Fit Verification: Height-seated maximum dimensions vary slightly: RC0805FR-077K5L measures 0.024" (0.60mm), while ERJ-6ENF7501V measures 0.028" (0.70mm). All other substitutes measure 0.026" (0.65mm), matching the original RMC1/10K7501FTP specification. Verify PCB clearance requirements before selection in space-constrained applications.

Frequently Asked Questions (FAQ)

Q: Can I substitute RMC1/10K7501FTP with any of the listed parts without design changes?

A: Yes. All listed substitute parts maintain identical electrical specifications (7.5 kOhms ±1%, 0.125W, ±100ppm/°C, -55°C ~ 155°C) and package format (0805 2012 Metric). Physical height variations are minimal (0.024" to 0.028") and do not affect standard PCB assembly. No design modifications are required for direct substitution.

Q: What is the difference between standard and automotive-qualified substitutes?

A: Automotive-qualified substitutes (ERJ-6ENF7501V, KTR10EZPF7501, RMCF0805FG7K50, RMCF0805FT7K50) carry AEC-Q200 certification, indicating compliance with automotive industry reliability and testing standards. Standard substitutes (CRG0805F7K5, RC0805FR-077K5L) are suitable for general industrial and consumer applications. Selection depends on end-application requirements.

Q: Which substitute offers the best supply availability?

A: RC0805FR-077K5L from YAGEO provides the highest inventory at 411349 pieces. RMCF0805FT7K50 from Stackpole Electronics Inc offers the second-highest availability at 793133 pieces. Both ensure reliable supply for high-volume production requirements.

Q: Does RC0805FR-077K5L moisture-resistant feature affect electrical performance?

A: No. Moisture-resistant construction is a material enhancement that does not alter electrical specifications. Resistance value, tolerance, temperature coefficient, and power rating remain identical to the original RMC1/10K7501FTP. Moisture resistance provides additional environmental protection in humid or corrosive conditions.

Q: Are all substitutes RoHS3 compliant?

A: Yes. All substitute parts listed carry RoHS3 compliance designation. All are REACH Unaffected with identical ECCN (EAR99) and HTSUS (8533.21.0030) classifications as the original part.

Q: What is the significance of KTR10EZPF7501 high voltage feature?

A: KTR10EZPF7501 includes high voltage capability designation in addition to AEC-Q200 automotive qualification. This indicates enhanced performance characteristics for high-voltage circuit applications. For standard voltage applications, this feature provides no additional benefit but does not prevent substitution.

Q: Can I mix different substitute manufacturers in the same production batch?

A: Yes. All substitute parts maintain identical electrical and mechanical specifications, allowing interchangeability within the same assembly. However, maintaining single-source components per production batch is recommended for traceability and quality control documentation purposes.